abacavir and lamivudine - Generic Medications

Abacavir and Lamivudine Tablets USP Abacavir and lamivudine tablets USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR ® ) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets USP are for oral administration. Each orange colored, oval shaped, biconvex, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate and 300 mg of lamivudine, and the inactive ingredients crospovidone, magnesium stearate, microcrystalline cellulose, and povidone. The tablets are coated with a film that is made of FD&C Yellow No. 6, hypromellose, polyethylene glycol, polysorbate, and titanium dioxide. Abacavir Sulfate The chemical name of abacavir sulfate is (1S,4R)- 4-[2-Amino-6-(cyclopropylamino) -9H- purin-9-yl]-2-cyclopentene-1-methanol sulfate (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O) 2 . H 2 SO 4 and a molecular weight of 670.74 g per mol. It has the following structural formula: Abacavir sulfate is a white to off-white solid with a solubility of approximately 77 mg per mL in distilled water at 25°C. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine The chemical name of lamivudine is (2R, cis)-4-amino-1-(2- hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-) enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2',3'-dideoxy, 3'thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.26 g per mol. It has the following structural formula: Lamivudine is a white to off-white solid with a solubility of approximately 68 mg per mL in water at 20°C. Image-02 image-03

Abacavir and lamivudine tablets ,USP Abacavir and lamivudine tablets,USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets, USP are for oral administration. Each orange, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate USP and 300 mg of Lamivudine USP, and the inactive ingredients magnesium stearate, microcrystalline cellulose, sodium starch glycolate, colloidal silicon dioxide, low-substituted hydroxypropyl cellulose and povidone. The tablets are coated with a film (Instacoat Universal Orange A05G32713) that is made of FD&C Yellow No. 6, hypromellose, polyethylene glycol 400, polysorbate 80, and titanium dioxide. Abacavir Sulfate The chemical name of abacavir sulfate is (1S, cis )-4-[2-amino-6-(cyclopropylamino)-9 H -purin-9yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O) 2 •H 2 SO 4 and a molecular weight of 670.76 g per mol. It has the following structural formula: Abacavir sulfate is a white to off-white solid and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-) 2′, 3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g per mol. It has the following structural formula: Lamivudine is a white to off-white crystalline solid and is soluble in water. aba-str lami-str

Abacavir and Lamivudine Abacavir and lamivudine tablets, USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets, USP are for oral administration. Each orange colored, capsule-shaped, biconvex film coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate USP and 300 mg of lamivudine USP, and the inactive ingredients magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The tablets are coated with a film (OPADRY orange YS-1-13065-A) that is made of FD&C Yellow No.6, hypromellose, polyethylene glycol 400, polysorbate 80, and titanium dioxide. Abacavir Sulfate, USP The chemical name of abacavir sulfate, USP is ( 1 S, 4R)- 4-[2-amino-6-(cyclopropylamino)-9 H -purin-9­yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S , 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O) 2 •H 2 SO 4 and a molecular weight of 670.74 g per mol. It has the following structural formula: Abacavir sulfate, USP is a white to almost white powder and is soluble in water. In vivo , abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine, USP The chemical name of lamivudine, USP is (2(1 H )-Pyrimidinone,4-amino-1-[2-(hydroxymethyl)-1,3-oxathiolan-5-yl]-, (2 R - cis )-. Lamivudine, USP is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine, USP has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.26 g per mol. It has the following structural formula: Lamivudine, USP is a white to almost white solid and is soluble in water, sparingly soluble in methanol, slightly soluble to practically insoluble in 96% ethanol and practically insoluble in acetone. FDA approved dissolution test specifications differ from USP. abacavir structure lamivudine structure

Abacavir and lamivudine Abacavir and lamivudine tablets USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets USP are for oral administration. Each orange, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate USP and 300 mg of lamivudine USP, and the inactive ingredients magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The tablets are coated with a film (opadry orange YS-1-13065-A) that is made of FD&C yellow #6 aluminum lake, hypromellose, polyethylene glycol 400, polysorbate 80, and titanium dioxide. Abacavir Sulfate The chemical name of abacavir sulfate is ( 1 S,cis) -4-[2-amino-6-(cyclopropylamino)-9 H -purin-9­-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O) 2 •H 2 SO 4 and a molecular weight of 670.76 g per mol. It has the following structural formula: Abacavir sulfate USP is a white to off-white powder and soluble in water, slightly soluble in methanol and practically insoluble in ethyl acetate and in absolute alcohol. In vivo , abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2´,3´-dideoxy, 3´-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g per mol. It has the following structural formula: Lamivudine USP is a white to off-white solid and is soluble in water. Abacavir Sulfate Structure Lamivudine Structure

Abacavir and lamivudine tablets USP Abacavir and lamivudine tablets USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR ® ) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets USP are for oral administration. Each orange, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate and 300 mg of lamivudine, and the inactive ingredients microcrystalline cellulose, sodium starch glycolate, hypromellose, corn starch, colloidal silicon dioxide, magnesium stearate. The tablets are coated with a film (Opadry orange 14B53805) that is made of hyperomellose 15CP, titanium dioxide, PEG 400, FD&C Yellow No 6, polysorbate 80. Abacavir Sulfate The chemical name of abacavir sulfate is ( 1 S,cis) -4-[2-amino-6-(cyclopropylamino)-9 H -purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S , 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O) 2 •H 2 SO 4 and a molecular weight of 670.76 g per mol. It has the following structural formula: Abacavir sulfate is a white to off-white solid and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g per mol. It has the following structural formula: Lamivudine is a white to off-white crystalline solid and is soluble in water. abacavir lamivudine

Abacavir and Lamivudine Tablets, USP Abacavir and Lamivudine tablets, USP contain the following 2 synthetic nucleoside analogues: abacavir sulfate USP (ZIAGEN, also a component of TRIZIVIR) and lamivudine USP (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and Lamivudine tablets, USP are for oral administration. Each orange, film-coated tablet contains 600 mg of abacavir as abacavir sulfate USP and 300 mg of lamivudine USP. The inactive ingredients are colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The tablets are coated with opadry orange which contains FD & C Yellow #6/Sunset Yellow FCF Aluminum lake, hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. Abacavir sulfate The chemical name of abacavir sulfate is ( 1S, 4R )-4-[2-Amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate salt (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C 14 H 18 N 6 O)2•H 2 SO 4 and a molecular weight of 670.74. It has the following structural formula: Abacavir sulfate USP is a white to off-white powder which is soluble in water and slightly soluble in methanol. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine The chemical name of lamivudine is 2(1H)-Pyrimidinone,4-amino-1-[2-(hydroxymethyl)-1,3-oxathio-lan-5-yl],(2R-cis). Lamivudine has also been referred to as (-)-2’-deoxy-3’-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.26. It has the following structural formula: Lamivudine USP is a white to off white solid which is soluble in water, sparingly soluble in methanol and slightly soluble in ethanol. abacavirstructure lamivudinestructure