Drugs Similar to HA PLUS 100DT CREAM TONING LIGHT
NIACINAMIDE ADENOSINE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
take a suitable amount on the skin
Uses Helps to brighten skin. Helps to improve wrinkles in the skin.
Uses ■ Intensive EGF peptide cream formulated with EGF, peptide and collagen vitalizes and firms skin for all-day long.
Uses ■ Intensive EGF peptide emulsion is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide cream sleeping pack is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide serum is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide toner is formulated with EGF, peptide and collagen for brightening and firming.
apply where needed
apply where needed
After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.
At the last step of skin care, take an appropriate amount, spread it over the entire face, and let it absorb.
Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem
Take an appropriate amount of essence and gently spread over the entire face for absorption.
Use apply proper amount to the skin
Use - after cleansing, trim the skin texture with toner, then remove the mask and spread it it fit the shape of the face - relax for about 10 to 20 minutes and remove the mask sheet - after removing the mask, tap the face light to absorb the essence remaining
Use apply proper amount to the skin
Use apply proper amount to the skin
after cleansing and toning, apply on clean skin and leave on for 10 to 20 minutes 2 remove the mask and gently massage remaining essence to penetrate the skin. no need to rinse
After facial wash, use a toner, Put the mask sheet on your face and take it off after 10~20 minutes.
After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each Adenosine Injection, USP vial contains a sterile, non-pyrogenic solution of adenosine 3 mg per mL and sodium chloride 9 mg per mL in water for injection, with pH between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure
By Active Ingredients
Drugs sharing any active ingredients
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and dab the remaining ampoule into skin for better absorption. To finish, apply your face cream.
Apply to the scalp and gently rub it to absorb it
Uses Uses: By making a direct penetration of active ingredients into the trouble, the cause of skin trouble is eliminated. This product is appropriate for acne prone skin.
* We recommend a usage depending on one’s scalp type, as follows: - Oily scalp: morning/evening shampoo (twice a day) - Neutral scalp: shampoo once a day - Dry scalp: shampoo once every two days. Wet hair with lukewarm water to open scalp pores. Pump a sufficient amount of Scalp Scaling Shampoo into hands, apply to scalp and massage gently for 2 minutes to remove sebum and dead skins. In massaging like movements, scrub hair & scalp for around 3 minutes before rinsing, to allow absorption of nutrients by scalp. - To prevent nutrients absorbed by pores from falling out, rinse with water cooler than body temperature. - Covering scalp with shampoo foam for more than 5 minutes may cause scalp irritability. Dry hair with blow-dryer using cool air. - Healthy scalp maintains a sub-acidity state of 4.5-5.5 Ph to protect hair from harmful bacteria. The Scalp Scaling Shampoo balances scalp to a 5.5 Ph, allowing for an optimal and healthy scalp.
Take out appropriate amount of this serum on the hand 2.spread it evenly on the skin. 3.Massage gently in the skin. 4.fully absorbs the product.
Apply this product to skin, remove the support after 10-20 minutes, and spread the remaining product evenly.
After face wash, arrange skin texture with suitable toner for your skin type and apply moderate amount of the product onto the face softly by lightly patting. *It supports synergistic skin care if you use the ampoule before mask.
Cleanse skin with toner to clear up skin texture. Massage the highly enriched ampoule in STEP 1 to face for sufficient absorption. Spread the mask sheet in STEP 2 onto entire face. Remove the mask after 15-20 minutes and massage the repair finalizing cream in STEP 3 onto face for absorption.
- massage with your finger more than 2 minutes and wait 3 minutes before rinsing
After cleansing wipe water and apply skin lotion on face. 2. Apply the mask evenly over the face for 10-20 minutes and remove. 3. Pad the left over residue lightly to absorb.
Apply proper amount to the skin.
Tidying up your skin with skin lotion after cleansing your face. Take out of the pack and apply mask evenly across your face to ensure good contact with the skin. Gently, peel off the mask from face after 10~20 minutes later. Finish with serum or cream depends on your facial skin types.
-For External use only -When using this product: using other topical acne medication at the same time or immediately following the use of this product may increase dryness or irritation of the skin. If this occurs, only one medication should be used unless directed by a doctor. If sensitive to the sun or when increased sun exposure is expected use a sunscreen when using this and other acne products.
Take a moderate amount and apply evenly over the face
Indication & Usage Directions After finishing your basic skincare, apply an appropriate amount of this cream all around the face Apply liberally 15 minutes before sun exposure Use a water resistant sunscreen if swimming or sweating Reapply at least every 2 hours(when used as sunscreen) Children under 6 months: Ask a doctor
apply proper amount to the skin
Apply to the face and around the neck in the morning and evening.
USES apply proper amount to the skin
Gently press cushion using a puff and pat evenly on skin. Can be used when applying touch up.
Apply proper amount to the skin.