ketoconazole KETOCONAZOLE PADAGIS ISRAEL PHARMACEUTICALS LTD FDA Approved Ketoconazole foam, 2% contains 2% ketoconazole USP, an antifungal agent, in a thermolabile hydroethanolic foam for topical application. The chemical name for ketoconazole is piperazine, 1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1 H -imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-, cis - with the molecular formula C 26 H 28 Cl 2 N 4 O 4 and a molecular weight of 531.43. The following is the chemical structure: Ketoconazole foam, 2% contains 20 mg ketoconazole per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol 58%, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant. chemical structure
FunFoxMeds bottle
Substance Ketoconazole
Route
TOPICAL
Applications
ANDA091550

Drug Facts

Composition & Profile

Strengths
2 % 20 mg 50 g 100 g
Quantities
32 count
Treats Conditions
1 Indications And Usage Ketoconazole Foam 2 Is Indicated For The Topical Treatment Of Seborrheic Dermatitis In Immunocompetent Patients 12 Years Of Age And Older Limitations Of Use Safety And Efficacy Of Ketoconazole Foam 2 For Treatment Of Fungal Infections Have Not Been Established Ketoconazole Foam 2 Is Indicated For Topical Treatment Of Seborrheic Dermatitis In Immunocompetent Patients 12 Years Of Age And Older 1 Limitations Of Use Safety And Efficacy Of Ketoconazole Foam 2 For Treatment Of Fungal Infections Have Not Been Established

Identifiers & Packaging

Container Type BOTTLE
UNII
R9400W927I
Packaging

16 HOW SUPPLIED/STORAGE AND HANDLING Ketoconazole Foam, 2% contains 20 mg of ketoconazole, USP per gram. The thermolabile hydroethanolic foam is available as follows: NDC 45802-532-32 50 g aluminum can NDC 45802-532-33 100 g aluminum can Store at 20° to 25°C (68° to 77°F). [See USP Controlled Room Temperature.] Do not store under refrigerated conditions. Contents are flammable. Do not expose containers to heat and/or store at temperatures above 49°C (120°F). Do not store in direct sunlight. Contents under pressure. Do not puncture and/or incinerate container. Keep out of reach of children.; PACKAGE/LABEL PRINCIPAL DISPLAY PANEL - CARTON 45802-532-33 Rx Only Ketoconazole Foam, 2% For Topical Use Only. Not For Ophthalmic, Oral, or Intravaginal Use. 100 g The following image is a placeholder representing the product identifier that is either affixed or imprinted on the drug package label during the packaging operation. carton serialization-template.jpg

Package Descriptions
  • 16 HOW SUPPLIED/STORAGE AND HANDLING Ketoconazole Foam, 2% contains 20 mg of ketoconazole, USP per gram. The thermolabile hydroethanolic foam is available as follows: NDC 45802-532-32 50 g aluminum can NDC 45802-532-33 100 g aluminum can Store at 20° to 25°C (68° to 77°F). [See USP Controlled Room Temperature.] Do not store under refrigerated conditions. Contents are flammable. Do not expose containers to heat and/or store at temperatures above 49°C (120°F). Do not store in direct sunlight. Contents under pressure. Do not puncture and/or incinerate container. Keep out of reach of children.
  • PACKAGE/LABEL PRINCIPAL DISPLAY PANEL - CARTON 45802-532-33 Rx Only Ketoconazole Foam, 2% For Topical Use Only. Not For Ophthalmic, Oral, or Intravaginal Use. 100 g The following image is a placeholder representing the product identifier that is either affixed or imprinted on the drug package label during the packaging operation. carton serialization-template.jpg

Overview

Ketoconazole foam, 2% contains 2% ketoconazole USP, an antifungal agent, in a thermolabile hydroethanolic foam for topical application. The chemical name for ketoconazole is piperazine, 1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1 H -imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-, cis - with the molecular formula C 26 H 28 Cl 2 N 4 O 4 and a molecular weight of 531.43. The following is the chemical structure: Ketoconazole foam, 2% contains 20 mg ketoconazole per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol 58%, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant. chemical structure

Indications & Usage

Ketoconazole foam, 2% is indicated for the topical treatment of seborrheic dermatitis in immunocompetent patients 12 years of age and older. Limitations of Use Safety and efficacy of ketoconazole foam, 2% for treatment of fungal infections have not been established. Ketoconazole foam, 2% is indicated for topical treatment of seborrheic dermatitis in immunocompetent patients 12 years of age and older ( 1 ). Limitations of Use Safety and efficacy of ketoconazole foam, 2% for treatment of fungal infections have not been established.

Dosage & Administration

Ketoconazole foam, 2% should be applied to the affected area(s) twice daily for four weeks. Hold the container upright, and dispense ketoconazole foam, 2% into the cap of the can or other cool surface in an amount sufficient to cover the affected area(s). Dispensing directly onto hands is not recommended, as the foam will begin to melt immediately upon contact with warm skin. Pick up small amounts of ketoconazole foam, 2% with the fingertips, and gently massage into the affected area(s) until the foam disappears. For hair-bearing areas, part the hair, so that ketoconazole foam, 2% may be applied directly to the skin (rather than on the hair). Avoid contact with the eyes and other mucous membranes. Ketoconazole foam, 2% is not for ophthalmic, oral or intravaginal use. • Ketoconazole foam, 2% should be applied to the affected area(s) twice daily for four weeks ( 2 ). • Ketoconazole foam, 2% is not for ophthalmic, oral, or intravaginal use ( 2 ).

Warnings & Precautions
• Ketoconazole foam, 2% may result in contact sensitization, including photoallergenicity ( 5.1 , 6.2 ). • The contents of ketoconazole foam, 2% are flammable. Avoid fire, flame, or smoking during and immediately following application. ( 5.2 ). 5.1 Contact Sensitization Ketoconazole foam, 2% may result in contact sensitization, including photoallergenicity [see Adverse Reactions (6.2) ] . 5.2 Flammable Contents The contents of ketoconazole foam, 2% include alcohol and propane/butane, which are flammable. Avoid fire, flame and/or smoking during and immediately following application. Do not puncture and/or incinerate the containers. Do not expose containers to heat and/or store at temperatures above 120°F (49°C). 5.3 Systemic Effects Hepatitis has been seen with orally administered ketoconazole (1:10,000 reported incidence). Lowered testosterone and ACTH–induced corticosteroid serum levels have been seen with high doses of orally administered ketoconazole. These effects have not been seen with topical ketoconazole.
Contraindications

None. None.

Adverse Reactions

The most common adverse reactions observed in clinical studies (incidence >1%) were application site burning and application site reaction ( 6.1 ). To report SUSPECTED ADVERSE REACTIONS, contact Padagis ® at 1-866-634-9120 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch . 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug, and may not reflect the rates observed in practice. The adverse reaction information from clinical trials does, however, provide a basis for identifying the adverse reactions that appear to be related to drug use and for approximating rates. The safety data presented in Table 1 reflect exposure to ketoconazole foam, 2% in 672 subjects, 12 years and older with seborrheic dermatitis. Subjects applied ketoconazole foam, 2% or vehicle foam twice daily for 4 weeks to affected areas on the face, scalp, and/or chest. Adverse reactions occurring in > 1% of subjects are presented in Table 1. Table 1: Adverse Reactions Reported by > 1% Subjects in Clinical Trials Adverse Reactions Ketoconazole Foam, 2% N = 672 n (%) Vehicle Foam N = 497 n (%) Subjects with an Adverse Reaction 188 (28%) 122 (25%) Application site burning 67 (10%) 49 (10%) Application site reaction 41 (6%) 24 (5%) Application site reactions that were reported in <1% of subjects were dryness, erythema, irritation, paresthesia, pruritus, rash and warmth. 6.2 Dermal Safety Studies In a photoallergenicity study, 9 of 53 subjects (17%) had reactions during the challenge period at both the irradiated and non-irradiated sites treated with ketoconazole foam, 2%. Ketoconazole foam, 2% may cause contact sensitization. 6.3 Postmarketing Experience The following adverse events have been identified during postmarketing use of ketoconazole foam, 2%: Gastrointestinal disorders: Cheilitis General disorders and administration site conditions: Application site pain and application site burn Skin and subcutaneous tissue disorders: Skin burning sensation and erythema Because these events are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure.


Similar Drugs

Related medications based on brand, generic name, substance, active ingredients.

View all similar drugs →