Drugs Similar to ALBUTEROL

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder. It is freely soluble in water, slightly soluble in alcohol, in chloroform and in ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively and following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (botanical source: maize) and sodium starch glycolate. FDA approved dissolution specification differs from the USP dissolution specification. Albuterol Tablet

Albuterol Tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576.70, and the molecular formula is (C 13 H 21 N O 3 ) 2 • H 2 S O 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for Albuterol tablets, 2 mg and 4 mg include: co-processed starch , lactose hydrate , magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. structure

Summary not available yet.

Albuterol tablets contain albuterol sulfate, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.70, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate USP, respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized starch (maize) and sodium starch glycolate. Chemcical Structer

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino) methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized (corn) starch and sodium lauryl sulfate. structure

Albuterol Tablets, USP contain albuterol sulfate, USP the racemic form of albuterol and a relatively selective beta2-adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576, and the molecular formula is (C13 H21N O3 )2• H2S O4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. The World Health Organization recommended name for albuterol base is salbutamol. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for albuterol tablets, 2 mg and 4 mg include: co-processed starch, lactose hydrate, magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. albuterol-struc

Albuterol tablets contain albuterol sulfate USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino)methyl]-4-hydroxy- m -xylene- α,α-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13 H 21 NO 3 ) 2. H 2 SO 4 . Albuterol sulfate, USP is a white or almost white crystalline powder, freely soluble in water, practically insoluble or very slightly soluble in Methylene chloride and alcohol, slightly soluble in Chloroform and Ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate USP, respectively. Each tablet also contains the following inactive ingredients: anhydrous lactose, hypromellose, magnesium stearate and sodium starch glycolate. Structural Formula

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder. It is freely soluble in water, slightly soluble in alcohol, in chloroform and in ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively and following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (botanical source: maize) and sodium starch glycolate. FDA approved dissolution specification differs from the USP dissolution specification. Albuterol Tablet

Albuterol Tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576.70, and the molecular formula is (C 13 H 21 N O 3 ) 2 • H 2 S O 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for Albuterol tablets, 2 mg and 4 mg include: co-processed starch , lactose hydrate , magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. structure

Summary not available yet.

Albuterol tablets contain albuterol sulfate, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.70, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate USP, respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized starch (maize) and sodium starch glycolate. Chemcical Structer

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino) methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized (corn) starch and sodium lauryl sulfate. structure

Albuterol Tablets, USP contain albuterol sulfate, USP the racemic form of albuterol and a relatively selective beta2-adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576, and the molecular formula is (C13 H21N O3 )2• H2S O4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. The World Health Organization recommended name for albuterol base is salbutamol. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for albuterol tablets, 2 mg and 4 mg include: co-processed starch, lactose hydrate, magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. albuterol-struc

Albuterol Tablets, USP contain albuterol sulfate, USP the racemic form of albuterol and a relatively selective beta2-adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576, and the molecular formula is (C13 H21N O3 )2• H2S O4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. The World Health Organization recommended name for albuterol base is salbutamol. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for albuterol tablets, 2 mg and 4 mg include: co-processed starch, lactose hydrate, magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. albuterol-struc

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino) methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized (corn) starch and sodium lauryl sulfate. structure

Albuterol Tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name 4-hydroxy- 3-hydroxymethyl-α-[(tert-butylamino) methyl]benzyl alcohol, sulfate and the following structural formula: The molecular weight of albuterol sulfate is 576.70, and the molecular formula is (C 13 H 21 N O 3 ) 2 • H 2 S O 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in alcohol, in chloroform, and ether. Each Albuterol tablet for oral administration contains 2 or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. The inactive ingredients for Albuterol tablets, 2 mg and 4 mg include: co-processed starch , lactose hydrate , magnesium stearate, partially pregelatinized maize starch and sodium lauryl sulfate. structure

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder. It is freely soluble in water, slightly soluble in alcohol, in chloroform and in ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively and following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (botanical source: maize) and sodium starch glycolate. FDA approved dissolution specification differs from the USP dissolution specification. Albuterol Tablet

Summary not available yet.

Albuterol tablets contain albuterol sulfate, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.70, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate USP, respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized starch (maize) and sodium starch glycolate. Chemcical Structer

Albuterol tablets contain albuterol sulfate USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino)methyl]-4-hydroxy- m -xylene- α,α-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13 H 21 NO 3 ) 2. H 2 SO 4 . Albuterol sulfate, USP is a white or almost white crystalline powder, freely soluble in water, practically insoluble or very slightly soluble in Methylene chloride and alcohol, slightly soluble in Chloroform and Ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate USP, respectively. Each tablet also contains the following inactive ingredients: anhydrous lactose, hypromellose, magnesium stearate and sodium starch glycolate. Structural Formula

The active component of Albuterol Sulfate HFA is albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino)methyl]-4-hydroxy- m -xylene-α, α′-diol sulfate (2:1)(salt) and the following chemical structure: Albuterol sulfate is a white crystalline powder with a molecular weight of 576.7, and the empirical formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . It is soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol Sulfate HFA is a blue plastic inhaler with a blue cap containing a pressurized metered-dose aerosol canister fitted with a counter. Each canister contains a microcrystalline suspension of albuterol sulfate in propellant HFA‑134a (1,1,1,2‑tetrafluoroethane). It contains no other excipients. After priming, each actuation of the inhaler delivers 120 mcg of albuterol sulfate, USP in 75 mg of suspension from the valve and 108 mcg of albuterol sulfate, USP from the mouthpiece (equivalent to 90 mcg of albuterol base from the mouthpiece). Prime Albuterol Sulfate HFA before using for the first time, when the inhaler has not been used for more than 2 weeks, or when the inhaler has been dropped. To prime Albuterol Sulfate HFA, release 4 sprays into the air away from the face, shaking well before each spray. Avoid spraying in eyes. Albuterol Sulfate chemical structure

The active component of Albuterol Sulfate HFA is albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino)methyl]-4-hydroxy- m -xylene-α, α′-diol sulfate (2:1)(salt) and the following chemical structure: Albuterol sulfate is a white crystalline powder with a molecular weight of 576.7, and the empirical formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . It is soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol Sulfate HFA is a blue plastic inhaler with a blue strapcap containing a pressurized metered-dose aerosol canister fitted with a counter. Each canister contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1,1,1,2-tetrafluoroethane). It contains no other excipients. After priming, each actuation of the inhaler delivers 120 mcg of albuterol sulfate, USP in 75 mg of suspension from the valve and 108 mcg of albuterol sulfate, USP from the mouthpiece (equivalent to 90 mcg of albuterol base from the mouthpiece). Prime Albuterol Sulfate HFA before using for the first time, when the inhaler has not been used for more than 2 weeks, or when the inhaler has been dropped. To prime Albuterol Sulfate HFA, release 4 sprays into the air away from the face, shaking well before each spray. Chemical structure

The active ingredient of albuterol sulfate inhalation aerosol is albuterol sulfate, a racemic salt, of albuterol. Albuterol sulfate has the chemical name α1-[(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt), and has the following chemical structure: The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C13H21NO3)2•H2SO4. Albuterol sulfate is a white or almost white crystalline powder. It is freely soluble in water and very slightly soluble in ethanol. Albuterol sulfate is the official generic name in the United States, and salbutamol sulfate is the World Health Organization recommended generic name. Albuterol sulfate inhalation aerosol is a pressurized metered-dose aerosol unit with a dose indicator. Albuterol sulfate inhalation aerosol is for oral inhalation only. It contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1, 1, 1, 2-tetrafluoroethane) and ethanol. Prime the inhaler before using for the first time and in cases where the inhaler has not been used for more than 2 weeks by releasing three sprays into the air, away from the face. After priming, each actuation delivers 108 mcg albuterol sulfate, from the actuator mouthpiece (equivalent to 90 mcg of albuterol base). Each canister provides 200 actuations (inhalations). This product does not contain chlorofluorocarbons (CFCs) as the propellant. Description

Albuterol sulfate inhalation solution is a relatively selective beta 2 -adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt), and the following structural formula: Albuterol sulfate has a molecular weight of 576.70, and the molecular formula (C 13 H 21 NO 3 ) 2 • H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each milliliter of Albuterol Sulfate Inhalation Solution 0.083% contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol Sulfate Inhalation Solution 0.083% contains no sulfiting agents or preservatives. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution. Chemical Structure

The active ingredient of Albuterol Sulfate Inhalation Aerosol is albuterol sulfate, a racemic salt, of albuterol. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino) methyl]-4-hydroxy- m -xylene-α,α’-diol sulfate (2:1)(salt), and has the following chemical structure: The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate is the official generic name in the United States, and salbutamol sulfate is the World Health Organization recommended generic name. Albuterol Sulfate Inhalation Aerosol is a pressurized metered-dose aerosol unit with a dose counter. Albuterol Sulfate is for oral inhalation only. It contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1, 1, 1, 2-tetrafluoroethane) and ethanol. Prime the inhaler before using for the first time and in cases where the inhaler has not been used for more than 2 weeks by releasing three sprays into the air, away from the face. After priming, each actuation delivers 108 mcg albuterol sulfate, from the actuator mouthpiece (equivalent to 90 mcg of albuterol base). Each canister provides 200 actuations (inhalations). This product does not contain chlorofluorocarbons (CFCs) as the propellant. structure

The active component of Albuterol Sulfate Inhalation Aerosol is albuterol sulfate, USP racemic α 1 [( tert- Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1)(salt), a relatively selective beta 2 -adrenergic bronchodilator having the following chemical structure: Albuterol sulfate is the official generic name in the United States. The World Health Organization recommended name for the drug is salbutamol sulfate. The molecular weight of albuterol sulfate is 576.7, and the empirical formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white to off-white crystalline solid. It is soluble in water and slightly soluble in ethanol. Albuterol Sulfate Inhalation Aerosol is a pressurized metered-dose aerosol unit for oral inhalation. It contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1,1,1,2-tetrafluoroethane), ethanol, and oleic acid. Each actuation delivers 120 mcg albuterol sulfate, USP from the valve and 108 mcg albuterol sulfate, USP from the mouthpiece (equivalent to 90 mcg of albuterol base from the mouthpiece). Each canister provides 200 inhalations. It is recommended to prime the inhaler before using for the first time and in cases where the inhaler has not been used for more than 2 weeks by releasing four “test sprays” into the air, away from the face. This product does not contain chlorofluorocarbons (CFCs) as the propellant. Chemical Structure

Albuterol Sulfate Syrup contains albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following chemical structure: Albuterol sulfate is a white or practically white powder freely soluble in water and slightly soluble in alcohol, in chloroform, and in ether per USP definition. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol Sulfate Syrup for oral administration contains 2 mg of albuterol as 2.4 mg of albuterol sulfate in each teaspoonful (5 mL). Albuterol Sulfate Syrup also contains the inactive ingredients Citric Acid, FD&C Yellow No. 6, Hypromellose, Purified Water, Sodium Benzoate, Sodium Citrate, Sorbitol Solution and Strawberry Flavor. The pH of the syrup is 3.5 to 4.5.

Albuterol sulfate inhalation solution is a relatively selective beta 2 -adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α′-diol sulfate (2:1) (salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization’s recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each mL of albuterol sulfate inhalation solution (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol sulfate inhalation solution (0.083%) contains no sulfiting agents. Albuterol sulfate inhalation solution is a clear, colorless solution. str

Albuterol tablets contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1)(salt) and the following structural formula: Albuterol sulfate has a molecular weight of 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol sulfate tablet, for oral administration contains 2 or 4 mg of albuterol as 2.4 or 4.8 mg of albuterol sulfate, respectively. Each tablet also contains the following inactive ingredients: anhydrous lactose, magnesium stearate, pregelatinized (corn) starch, and sodium starch glycolate. Structural Formula

Albuterol sulfate inhalation solution is a relatively selective beta 2 -adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt), and the following structural formula: Albuterol sulfate has a molecular weight of 576.70 and the molecular formula (C 13 H 21 NO 3 ) 2 • H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each milliliter of Albuterol Sulfate Inhalation Solution 0.083% contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol Sulfate Inhalation Solution 0.083% contains no sulfiting agents or preservatives. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution. Chemical Structure

Albuterol sulfate inhalation solution is a relatively selective beta 2 -adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1 -[( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt), and the following structural formula: Albuterol sulfate has a molecular weight of 576.70 and the molecular formula (C 13 H 21 NO 3 ) 2 • H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each milliliter of albuterol sulfate inhalation solution 0.083% contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol sulfate inhalation solution 0.083% contains no sulfiting agents or preservatives. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution. Chemical Structure

Albuterol inhalation solution is a relatively selective beta 2 -adrenergic bronchodilator (see CLINICAL PHARMACOLOGY section below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1 [( tert -Butylamino)methyl]-4-hydroxy- m -xylene-α,α´diol sulfate (2:1) (salt), and the following structural formula: Albuterol sulfate has a molecular weight of 576.71 and the molecular formula (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol inhalation solution, USP 0.083% requires no dilution before administration. Each mL of albuterol inhalation solution, USP (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate USP) in an isotonic, sterile, aqueous solution containing sodium chloride, edetate disodium and sodium citrate; hydrochloric acid is used to adjust the pH between 3 and 5. Albuterol inhalation solution, USP (0.083%) contains no sulfiting agents. Albuterol inhalation solution is a clear, colorless solution. albuterol-sulfate-chemical-structure

The active component of albuterol sulfate inhalation aerosol is albuterol sulfate, USP racemic α 1 [( tert- Butylamino)methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1)(salt), a relatively selective beta 2 -adrenergic bronchodilator having the following chemical structure: Albuterol sulfate is the official generic name in the United States. The World Health Organization recommended name for the drug is salbutamol sulfate. The molecular weight of albuterol sulfate is 576.7, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate is a white to off-white crystalline solid. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate inhalation aerosol is a pressurized metered-dose aerosol unit for oral inhalation. It contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1,1,1,2-tetrafluoroethane), ethanol, and oleic acid. Each actuation delivers 120 mcg albuterol sulfate, USP from the valve and 108 mcg albuterol sulfate, USP from the mouthpiece (equivalent to 90 mcg of albuterol base from the mouthpiece). Each canister provides 200 inhalations. It is recommended to prime the inhaler before using for the first time and in cases where the inhaler has not been used for more than 2 weeks by releasing four “test sprays” into the air, away from the face. This product does not contain chlorofluorocarbons (CFCs) as the propellant. Chemical Structure