Drugs Similar to PROTECTING TONE UP AND GLOW B.B
NIACINAMIDE ADENOSINE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
take a suitable amount on the skin
Uses Helps to brighten skin. Helps to improve wrinkles in the skin.
Uses ■ Intensive EGF peptide emulsion is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide cream formulated with EGF, peptide and collagen vitalizes and firms skin for all-day long.
Uses ■ Intensive EGF peptide cream sleeping pack is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide serum is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide toner is formulated with EGF, peptide and collagen for brightening and firming.
apply where needed
apply where needed
After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.
At the last step of skin care, take an appropriate amount, spread it over the entire face, and let it absorb.
Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem
Take an appropriate amount of essence and gently spread over the entire face for absorption.
Use apply proper amount to the skin
Use - after cleansing, trim the skin texture with toner, then remove the mask and spread it it fit the shape of the face - relax for about 10 to 20 minutes and remove the mask sheet - after removing the mask, tap the face light to absorb the essence remaining
Use apply proper amount to the skin
Use apply proper amount to the skin
Take an appropriate amount of this product and spread it evenly on the skin.
after cleansing and toning, apply on clean skin and leave on for 10 to 20 minutes 2 remove the mask and gently massage remaining essence to penetrate the skin. no need to rinse
After facial wash, use a toner, Put the mask sheet on your face and take it off after 10~20 minutes.
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. image1
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structural-formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each Adenosine Injection, USP vial contains a sterile, non-pyrogenic solution of adenosine 3 mg per mL and sodium chloride 9 mg per mL in water for injection, with pH between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. formula1.jpg
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
By Active Ingredients
Drugs sharing any active ingredients
After cleansing the skin, take an adequate amount of serum and apply on skin. After formation of oxygen bubble, pat lightly for well absorption.
Take an appropriate amount of this product and spread it evenly on the skin.
Apply serum to face and neck every morning and/or night. Keeping skin moisturized is important for all skin types. In every step of skin care, always use circular, upward motions with a gentle touch on your face.
To help hair root strengthen and prevent hair loss
Apply a small amount on clean skin each morning and night. avoiding eye area. May be used before using the Rejuvena PREMIUM in G-Blue and G-Red mod.
Use the product every morning and night after cleansing the face Soak cotton pad in toner and wipe your face or use hand and apply adequate amount on face
Take an appropriate amount with a spatula, spread on to your skin and scrub your face.
apply proper amount to the skin
After washing your face, drain off the water and adjust lotion on your face skin. Open the product and attach a mask sheet on your aroun eyes and full face. Relax for 15~20 minutes and remove it. After getting rid of it, help the rest of liquid on your fact to absorb as patting lightly.
After following the daily skin care routine, apply the Conju Princess BB Cream generously onface and sensitive area. Reapply it again every two hours if sensitive exposure is contrast and also be used as a make-up base
After the basic skin care, shake well and evenly apply on to the skin.
Take appropriate amount and apply evenly to skin
Summary not available yet.
Use after toning skin Take a bean-sized amount of emulsion Apply on skin and pat lightly for well absorption
Stop use and ask a doctor if rash or irritation develops and lasts Warnings Skin Cancer/Skin Aging Alert: Spending time in the sun increases your risk of skin cancer and early skin aging. This product has been shown to only prevent sunburn, not skin cancer or early skin aging. For External use only Do not use on damaged or broken skin. When using this product, keep out of eyes. Rinse with water to remove Directions for Sunscreen use • after moisturizing, apply evenly to entire face and neck • apply liberally 15 minutes before sun exposure • use a water resistant sunscreen if swimming or sweating • reapply at least every 2 hours • children under 6 months: Ask a doctor Inactive ingredients Water, PPG-2 Myristyl Ether Propionate, Butylene Glycol, Glyceryl Stearate, Tocopheryl Acetate, Decyl Oleate, Hydrogenated Coco-Glycerides, Isostearyl Isostearate, Cetearyl Alcohol, Dimethicone, Stearyl Alcohol, Shea Butter Extract, Olive Oil, Cyclomethicone,Hydrolysed Milk Protein, Niacinamide, Adenosine Triphosphate, Retinyl Palmitate, Peanut Oil, Lecithin, Ascorbyl Palmitate, Tocopherol, Green Tea Extract, Coneflower Extract, Xanthan Gum, Propylene Glycol, Disodium EDTA, Myristyl Alcohol, Myreth-4, Ceteareth-15, Ceteareth-20, Ceteareth-25, Cetyl Alcohol, PEG-30 Stearate, Fragrance, Phenoxyethanol, Ethylhexylglycerin.
Sweep the face with the one step pad after cleansing. Absorbe the toner of the pad on the skin. Apply the the two step cream on the skin. Absorbe the cream on the skin with palm.
Apply after toner, paint appropriate amount on the skin. Please absorbs Pat it lightly in skin.
Open the package and unfold the cellulose mask pack. Then, remove the white film. Attach the product tightly on your face using the side where the white film was removed. Then, remove the fabric on the other side. Carefully adjust the position of the mask on your face. Try not to damage the soft cellulose mask pack. After taking 20-30 minutes of rest, remove the mask. Let your skin absorb the remaining essence with gently dabbing motion.
After face wash, apply proper amount of toner appropriately to the skin at the emulsion stage. Spread it evenly across the face and gently tap them for easy absorption.
Shake the bottle enough. Lightly Press the button for 1 or 2 seconds and check CC cream on the puff. (Very important: Do not press the button while the puff is contact with your face. You mush press the button at a distance before you apply it on your face) Apply on your skin with the puff.