Drugs Similar to HYDRATING ALL IN ONE CONCENTRATE TREATMENT MASK

take a suitable amount on the skin

Uses Helps to brighten skin. Helps to improve wrinkles in the skin.

Uses ■ Intensive EGF peptide cream formulated with EGF, peptide and collagen vitalizes and firms skin for all-day long.

Uses ■ Intensive EGF peptide emulsion is formulated with EGF, peptide and collagen for brightening and firming.

Uses ■ Intensive EGF peptide cream sleeping pack is formulated with EGF, peptide and collagen for brightening and firming.

Uses ■ Intensive EGF peptide serum is formulated with EGF, peptide and collagen for brightening and firming.

Uses ■ Intensive EGF peptide toner is formulated with EGF, peptide and collagen for brightening and firming.

apply where needed

apply where needed

After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.

At the last step of skin care, take an appropriate amount, spread it over the entire face, and let it absorb.

Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem

Take an appropriate amount of essence and gently spread over the entire face for absorption.

Use apply proper amount to the skin

Use - after cleansing, trim the skin texture with toner, then remove the mask and spread it it fit the shape of the face - relax for about 10 to 20 minutes and remove the mask sheet - after removing the mask, tap the face light to absorb the essence remaining

Use apply proper amount to the skin

Use apply proper amount to the skin

Take an appropriate amount of this product and spread it evenly on the skin.

After facial wash, use a toner, Put the mask sheet on your face and take it off after 10~20 minutes.

After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.

Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance

Use Use to Regrow Hair on Scalp and Beard

Use: To regrow hair of scalp and beard

Use: To regrow hair of scalp and beard

Use to Regrow Hair on Scalpand Beard

Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.

Adenosine, USP is an endogenous nucleoside and is chemically described as 6-Amino-9- β -D-ribofuranosyl- 9H -purine. Adenosine, USP has the following structural formula: The molecular formula for adenosine, USP is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Adenosine injection, USP is a sterile, non-pyrogenic, clear, colorless solution for intravenous use. Each mL of adenosine injection, USP contains adenosine USP, 3 mg and sodium chloride 9 mg in water for injection q.s. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. image1

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure

Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac ® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure

Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula

All year-round. Apply every morning at the end of the skincare routine of going out.

apply an appropriate amount to the hand

Uses -helps prevent sunburn -for skin that burns easily -provides moderate protection against sunburn -higher SPF gives more sunburn protection Directions -for external use only -when using this product keep out of eyes -rinse with water to remove -stop use and ask doctor if rash or irritation develops and lasts -keep out of reach of children -do not use on infants under 6 months of age

Take an appropriate amount of this product and spread it evenly on the skin.

After using skin toner, take an adequate amount of essence Apply on skin and pat lightly for well absorption

Apply every morning and evening after cleansing. Dispense a generous amount onto palm, gently pat and massage over face until fully absorbed

①Take out breast pack from pouch and remove one sheet from both sheets. (Same with opposite breast pack.) ②Put nipple in the center of the hole and place sheet in desired direction. ③Press sheet according to shape of breast evenly. ④Relax for 15~20 mins and make sure essence is absorbed into breast. ※ You can massage your breast after with left essence.

After face wash, apply proper amount of toner appropriately to the skin at the emulsion stage. Spread it evenly across the face and gently tap them for easy absorption.

apply proper amount to the skin

Siseundeusi’s Luminant essence is a functional cosmetic which is effective for whitening and wrinkle care. The ingredient of Luminant essence, Miraculous Native Grass extract has strong anti-aging effect; it helps to improve your skin’s elasticity and skin tones and gives your skin nutrients and takes cares of your pores; it brings brightness on your skin.

Summary not available yet.

Apply a small amount of cream on the face and gently pat the skin.

apply proper amount to the skin

Softly apply cream along the skin and pat gently for better absorption

after cleansing trim the skin with toner, take out the mask sheet, unfuld and then remove the films put the upper and lower mask sheets tightly on face according to the shape after taking a comfortable rest for 10-20 minutes, remove the mask and lightly pat the remaining cream for better absorption

apply proper amount to the skin

Cleanse and dry face thoroughly. Open pouch, unfold mask and apply to face. Leave it for 10 - 20 minutes, remove the mask and tap slightly until essence absorbed.

After cleansing, use toner to smooth the skin texture. Apply an adequate amount of the emulsion to the face, and spread it softly. Pat your face to be absorbed completely.

take appropriate amount and apply onto all over face after shaving or facial wash

Take an appropriate amount of this product and spread it evenly on the skin.