Drugs Similar to TENUE WHITENNING TONE UPCREAM

apply proper amount to the skin

In the last step of basic care, apply an appropriate amount to the face, neck, arms, legs, etc. that are prone to UV exposure.

Take an appropriate amount of this product and spread it evenly on the skin

How to use; At the last stage of basic care, apply an appropriate amount to the face, neck, arms, and legs that are easily exposed to UV rays.

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

apply proper amount to the skin

Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance

Use Use to Regrow Hair on Scalp and Beard

Use: To regrow hair of scalp and beard

Use: To regrow hair of scalp and beard

Use to Regrow Hair on Scalpand Beard

Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. image1

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure

Adenosine, USP is an endogenous nucleoside and is chemically described as 6-Amino-9- β -D-ribofuranosyl- 9H -purine. Adenosine, USP has the following structural formula: The molecular formula for adenosine, USP is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Adenosine injection, USP is a sterile, non-pyrogenic, clear, colorless solution for intravenous use. Each mL of adenosine injection, USP contains adenosine USP, 3 mg and sodium chloride 9 mg in water for injection q.s. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula

Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each Adenosine Injection, USP vial contains a sterile, non-pyrogenic solution of adenosine 3 mg per mL and sodium chloride 9 mg per mL in water for injection, with pH between 4.5 and 7.5. Structural Formula

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac ® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE

Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula

Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE

Apply to the face and around the neck in the evening

- Derma First Mist : Spray the mist evenly on entire face after cleansing. Pat gently until it is fully absorbed. In case of sensitive skin, spray on hands and apply to face. - Derma First Ampoule : Apply 2 or 3 drops on the face after using Derma First Mist. Gently pat on eye, mouth and nose area for better absorption.

After cleansing, apply gently on your face and neck, making sure to softly tap the skin to aid absorption.

Take a proper amount after shower apply it gently according to skin texture, and wash it off to finish

apply to skin with proper amount and spread it evenly

apply suitable amunt to the skin

Stop use and ask a doctor if rash occurs Skin Cancer/Skin Aging Alert: Spending time in the sun increases your risk of skin cancer and early skin aging. This product has been shown only to prevent sunburn, not skin cancer or early skin aging. For external use only Do not use on damaged or broken skin When using this product keep out of eyes. Rinse with water to remove. Directions apply daily after cleansing and toning smooth over face and throat apply liberally 15 minutes before sun exposure children under 6 months of age: Ask a doctor reapply at least every 2 hours use a water resistant sunscreen if swimming or sweating Inactive Ingredients: Water (Aqua), C12-15 Alkyl Ethylhexanoate, Cetyl Alcohol, Glycerin, Helianthus Annuus (Sunflower) Seed Oil, Sea Water (Maris Aqua), Dimethicone, Behenyl Alcohol, Stearyl Alcohol, Butylene Glycol, Propylene Glycol, Caprylic/Capric Triglyceride, Cyclopentasiloxane, Batyl Alcohol, Glycoproteins, Panax Ginseng Root Extract, Equisetum Arvense (Horsetail) Extract, Phytosterols, Salicornia Herbacea Extract, Niacinamide, Hydrolyzed Oat Protein, Alpinia Galanga Leaf Extract, Quartz, Disodium Adenosine Triphosphate,Tocopherol, Carica Papaya (Papaya) Fruit Extract, Cholesteryl Nonanoate, Cimicifuga Racemosa Root Extract, Zinc Gluconate, Hydrogenated Lecithin, Trifolium Pratense (Clover) Flower Extract, Copper Gluconate, Gold, PEG-20 Phytosterol, Actinidia Polygama Fruit Extract, Acetyl Heptapeptide, Colloidal Gold, Cholesteryl Oleate, Dimethylmethoxy Chromanyl Palmitate, Corallina Officinalis Extract, Carbomer, Cholsteryl Stearate, Acrylates Copolymer, Boswellia Serrata Resin Extract, Ammonium Acryloyldimethltaurate/VP Copolymer, Phormidium Persicinum Extract, Caprylyl Glycol, Dextran, Magnesium Asparate, Glyceryl Stearate, Disodium EDTA, Xanthan Gum, BHT, Fragrance (Parfum), Linalool, Hexyl Cinnamal, Hydroxycitronellal, Alpha-Isomethyl Ionone, Geraniol, Citronellol, Benzyl Benzoate, Butylphenyl Methylpropional, Evernia Furfuracea (Treemoss) Extract, Eugenol, Benzyl Salicylate, Limonene, Phenoxyethanol, Sorbic Acid, Methylparaben, Mica, Titanium Dioxide (CI 77891), Red (CI 14700), Yellow 5 (CI 19140)

apply suitable amunt to the skin

After cleansing, apply your skin softner. Apply an appropriate amount FILL PLUS along your face skin's texture. After 10 to 15 minutes with the FILL PLUS on your face and Finish with your lotion or cream.

Gently press cushion using a puff and pat evenly on skin. Can be used when applying touch up.

Indication & Usage Directions ■ Pour some on the palm of your hand and apply to skin gently. ■ Take appropriate amount according to your skin condition and apply every morning and night. ■ Gently tap the skin with fingers for complete absorption. ■ For the best results, use with Suyan Cheongsoo(Toner) and Suyan Jeongbaek(Cream). ■ Children under 6 months: ask a doctor.

Use after your daily skincare routine Apply starting from larger surface using your fingertip, applying from the center and out, using less around the eyes and ridge of the nose *Always close the cover after each use. This prevents nourishing and moisturizing agents from evaporationg.

apply proper amount to the skin

Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and dab the remaining ampoule into skin for better absorption. To finish, apply your face cream.

Use after your daily skincare routine Apply starting from larger surface using your fingertip, applying from the center and out, using less around the eyes and ridge of the nose For extra coverage, take a small amount of the product with the tip of your finger and dab over the affected area. *Always close the cover after each use. This prevents nourishing and moisturizing agents from evaporating.

apply proper amount and gently massage

Open the lid, press the lid to fill the dropper and apply evenly 3-4 drops to the desired parts, gently tap with the fingers to allow it to absorb

Use as foundation after basic skin care routine or right afternoon when needed (can use before and after makeup) Apply by pressing the puff into the moistened sponge and patting the puff onto the face

Summary not available yet.

After toning or at ther toner step, drop the appropriate amount of Biotoc Regen Ampoule on your face (apply first on deep lines) and let it absorb by tapping lightly. Using Biotoc line before makeup, you can get smooth and shining look.