Drugs Similar to SUMATRIPTAN

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole­-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate. Chemical Structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white or almost white powder that is freely soluble in water, sparingly soluble in methanol and practically insoluble in methylene chloride. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and talc. Structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan Injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection, USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol. Structural Formula

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole‑-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate. Chemical Structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: [chemical structure] The molecular formula is C14H21N3O2S•C4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400.

Sumatriptan Injection USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S • C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white or almost white powder that is readily soluble in water and in saline. Sumatriptan injection USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol. Sumatriptan Chemical Structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 18 H 27 N 3 O 6 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan Injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection, USP 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 270 to 330 mOsmol. image description

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole­-5-methanesulfonamide succinate (1:1), and it has the following structure The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate.

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole­-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate. Chemical Structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan Injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of Sumatriptan Injection, USP 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range is approximately 4.2 to 5.3. The osmolality is 291 mOsmol. chemical structure

Summary not available yet.

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan Injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of Sumatriptan Injection, USP 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range is approximately 4.2 to 5.3. The osmolality is 291 mOsmol. chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole­-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate. Chemical Structure

Sumatriptan Nasal Spray contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively. Sumatriptan chemical structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 18 H 27 N 3 O 6 S, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of injection is 270-330 mOsmol. structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

IMITREX tablets contain sumatriptan succinate, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off‑white powder that is readily soluble in water and in saline. Each IMITREX tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate. Each 100-mg tablet also contains hypromellose, iron oxide, titanium dioxide, and triacetin. Imitrex Tablets chemical structure

IMITREX injection contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. IMITREX injection is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of IMITREX injection 8-mg/mL solution contains 5.6 mg of sumatriptan succinate equivalent to 4 mg of sumatriptan and 3.8 mg of sodium chloride, USP in Water for Injection, USP. Each 0.5 mL of IMITREX injection 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of both solutions is approximately 4.2 to 5.3. The osmolality of both injections is 291 mOsmol. Sumatriptan Chemical Structure

Sumatriptan Nasal Spray contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively. Sumatriptan chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white or almost white powder that is freely soluble in water, sparingly soluble in methanol and practically insoluble in methylene chloride. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and talc. Structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino) ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a White or almost white powder that is readily soluble in water and in saline. Each Sumatriptan tablets, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium bicarbonate. Each 25-mg and 50-mg tablet also contains hypromellose, titanium dioxide and triacetin. Each 100-mg tablet also contains hypromellose, iron oxide red, titanium dioxide, and triacetin. FDA approved dissolution test specifications differ from USP. "Image Description"

Sumatriptan nasal spray, USP contains sumatriptan USP, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan USP is a white to pale yellow powder that is very slightly soluble in water. Each sumatriptan nasal spray, USP contains 20 mg of sumatriptan USP in a 100- mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 742 mOsmol for 20-mg sumatriptan nasal spray. API structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white or almost white powder that is freely soluble in water, sparingly soluble in methanol and practically insoluble in methylene chloride. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and talc. Structure

Sumatriptan Injection USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S • C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white or almost white powder that is readily soluble in water and in saline. Sumatriptan injection USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol. Sumatriptan Chemical Structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan injection USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in water for injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol. Sumatriptan-Image01

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan nasal spray contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is very slightly soluble in water and in saline. Each sumatriptan nasal spray contains 20 mg of sumatriptan in a 100-MicroL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and water for injection USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5 and 20 mg sumatriptan nasal spray, respectively. sumatriptan chemical structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 18 H 27 N 3 O 6 S, representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection 12-mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of injection is 270-330 mOsmol. structure

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan nasal spray, USP contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan nasal spray, USP contains 5 or 20 mg of sumatriptan in a 100-microL unit dose aqueous buffered solution containing purified water USP, sulfuric acid NF, sodium hydroxide NF, monobasic potassium phosphate NF, and anhydrous dibasic sodium phosphate USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg sumatriptan nasal spray, USP, respectively. suumatriptan-molec-struc

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C14H21N3O2S•C4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. Description

Sumatriptan Nasal Spray, USP contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to pale yellow powder that is very slightly soluble in water. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, benzalkonium chloride solution NF, edetate disodium dihydrate USP and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively. chemical-structure.jpg

Sumatriptan tablets, USP contain sumatriptan succinate USP, a selective 5‑HT 1B/1D receptor agonist. Sumatriptan succinate, USP is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off‑white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, and opadry. The components of opadry yellow used in the formulation of 25 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 6000, iron oxide yellow, and polysorbate 80. The components of opadry pink used in the formulation of 50 mg tablets are hypromellose, titanium dioxide, polyethylene glycol 400, and iron oxide red. The components of opadry white used in the formulation of 100 mg tablets are hypromellose, titanium dioxide, and polyethylene glycol 400. chemical structure

Sumatriptan Injection, USP contains sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate is a white to off-white powder that is readily soluble in water and in saline. Sumatriptan Injection, USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection, USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol. Structural Formula

Sumatriptan nasal spray contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is very slightly soluble in water and in saline. Each sumatriptan nasal spray contains 20 mg of sumatriptan in a 100-MicroL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and water for injection USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5 and 20 mg sumatriptan nasal spray, respectively. sumatriptan chemical structure

Sumatriptan nasal spray, USP contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan nasal spray, USP contains 5 or 20 mg of sumatriptan in a 100-microL unit dose aqueous buffered solution containing purified water USP, sulfuric acid NF, sodium hydroxide NF, monobasic potassium phosphate NF, and anhydrous dibasic sodium phosphate USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg sumatriptan nasal spray, USP, respectively. suumatriptan-molec-struc

Sumatriptan Nasal Spray, USP contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to pale yellow powder that is very slightly soluble in water. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-microL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, benzalkonium chloride solution NF, edetate disodium dihydrate USP and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively.

Sumatriptan Nasal Spray, USP contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to pale yellow powder that is very slightly soluble in water. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, benzalkonium chloride solution NF, edetate disodium dihydrate USP and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively. chemical-structure.jpg

Sumatriptan Nasal Spray contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan is a white to off-white powder that is readily soluble in water and in saline. Each Sumatriptan Nasal Spray contains 5 or 20 mg of sumatriptan in a 100-mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 372 or 742 mOsmol for the 5- and 20-mg Sumatriptan Nasal Spray, respectively. Sumatriptan chemical structure

Sumatriptan nasal spray, USP contains sumatriptan USP, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan USP is a white to pale yellow powder that is very slightly soluble in water. Each sumatriptan nasal spray, USP contains 20 mg of sumatriptan USP in a 100- mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 742 mOsmol for 20-mg sumatriptan nasal spray. API structure

TOSYMRA contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 1-[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]- N -methylmethanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.40. Sumatriptan is a white to pale yellow powder that is very slightly soluble in water. TOSYMRA nasal spray is a clear, pale yellow to yellow colored liquid. Each 100 uL of TOSYMRA contains 10 mg of sumatriptan in single-dose aqueous buffered solution containing citric acid monohydrate, n-Dodecyl beta-D-maltoside, potassium phosphate monobasic, sodium chloride, and sodium phosphate dibasic anhydrous in water for injection. The pH range of solution is approximately 5.0 to 6.0 and the osmolality is between 270 to 330 mOsmol. Chemical Structure

TOSYMRA contains sumatriptan, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 1-[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]- N -methylmethanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.40. Sumatriptan is a white to pale yellow powder that is very slightly soluble in water. TOSYMRA nasal spray is a clear, pale yellow to yellow colored liquid. Each 100 uL of TOSYMRA contains 10 mg of sumatriptan in single-dose aqueous buffered solution containing citric acid monohydrate, n-Dodecyl beta-D-maltoside, potassium phosphate monobasic, sodium chloride, and sodium phosphate dibasic anhydrous in water for injection. The pH range of solution is approximately 5.0 to 6.0 and the osmolality is between 270 to 330 mOsmol. Chemical Structure