Drugs Similar to FOASU JIN MOISTURIZING ESSENCE
NIACINAMIDE ADENOSINE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
take a suitable amount on the skin
Uses Helps to brighten skin. Helps to improve wrinkles in the skin.
Uses ■ Intensive EGF peptide emulsion is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide cream formulated with EGF, peptide and collagen vitalizes and firms skin for all-day long.
Uses ■ Intensive EGF peptide cream sleeping pack is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide serum is formulated with EGF, peptide and collagen for brightening and firming.
Uses ■ Intensive EGF peptide toner is formulated with EGF, peptide and collagen for brightening and firming.
apply where needed
apply where needed
After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.
At the last step of skin care, take an appropriate amount, spread it over the entire face, and let it absorb.
Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem
Take an appropriate amount of essence and gently spread over the entire face for absorption.
Use - after cleansing, trim the skin texture with toner, then remove the mask and spread it it fit the shape of the face - relax for about 10 to 20 minutes and remove the mask sheet - after removing the mask, tap the face light to absorb the essence remaining
Use apply proper amount to the skin
Use apply proper amount to the skin
Take an appropriate amount of this product and spread it evenly on the skin.
after cleansing and toning, apply on clean skin and leave on for 10 to 20 minutes 2 remove the mask and gently massage remaining essence to penetrate the skin. no need to rinse
After facial wash, use a toner, Put the mask sheet on your face and take it off after 10~20 minutes.
After facial wash, use a toner, Put the ma sk sheet on your face and take it off after 10~20 minutes.
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structural-formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure
Adenosine, USP is an endogenous nucleoside and is chemically described as 6-Amino-9- β -D-ribofuranosyl- 9H -purine. Adenosine, USP has the following structural formula: The molecular formula for adenosine, USP is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Adenosine injection, USP is a sterile, non-pyrogenic, clear, colorless solution for intravenous use. Each mL of adenosine injection, USP contains adenosine USP, 3 mg and sodium chloride 9 mg in water for injection q.s. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac ® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
By Active Ingredients
Drugs sharing any active ingredients
After toning, apply a proper amount of the cream onto the damaged eye rims and gently massage to soak in.
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and pat the remaining ampoule into skin for better absorption. To finish, apply your face cream.
Shake the facial mist up before use as it is an oil in liquid formula. Close your eyes and spray the mist onto your face and tap lightly with fingers for full absorption.
Summary not available yet.
Hand Cream : After Washing hands, Gently rub and massage hands with the hand cream. Lip Balm : Apply the lip balm on lips for moisturizing.
indications are attached in product label
Take an appropriate amount to the skin
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and pat the remaining ampoule into skin for better absorption. To finish, apply your face cream.
At the last step of skin care, use twice in a day at morning and evening Take an adequate amount of cream Apply on skin and rub entire face and neck
At the last step of skin care, use twice in a day at morning and evening Apply to skin and neck
After face wash, apply suitable toner and serum [ampoule] for your skin type and apply moderate amount of the product onto the fact softly by lightly patting.
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and pat the remaining ampoule into skin for better absorption. To finish, apply your face cream.
Apply a moderate amount ontoclean and toned skin and gentlypat to allow for absorption.
Uses Helps skin brightening and anti-wrinkle.
Take an appropriate amount to the skin
Apply proper amount to the skin
Take an appropriate amount and spread evenly on the skin
After using skin toner, take an adequate amount of serum. Apply on face and neck and pat lightly for well absorption.
Take a nut size of the cream in the palm of your hand Add water, work into a rish foam, and apply to the entire face, avoiding the eyes area. Wash and rinse off.
At the step of skin care, use twice in a day at the morning and evening. Take an adequate amount of cream amd apply on skin and neck. Pat lightly for well absorption.