Drugs Similar to LIDOCAINE
LIDOCAINE
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of lidocaine ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine, USP) 5% in a water miscible ointment vehicle containing polyethylene glycols. structure
LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure
Sterile isotonic solutions containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). Solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 HCl H 2 0 M.W. 288.8 Epinephrine is ( - )-3, 4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF LIDOCAINE HYDROCHLORIDE AND EPINEPHRINE INJECTION, USP BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) LIDOCAINE HCl 2% and EPINEPHRINE 1:50,000 2 1:50,000 6.5 1.2 0.25 LIDOCAINE HCl 2% and EPINEPHRINE 1:100,000 2 1:100,000 6.5 1.2 0.25 The pH of the lidocaine hydrochloride and epinephrine injection, USP solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride epinephrine
Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2- (diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Image
Lidocaine Ointment, USP;5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment, USP;5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment, USP;5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. lidocaine-fig1
Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. 1
Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. chemical structure for lidocaine
Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of lidocaine ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine, USP) 5% in a water miscible ointment vehicle containing polyethylene glycols. chemical-structural
Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. 1
Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. image description
Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous, isotonic solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14 H 22 N 2 O • HCl) has the following structural formula: Each mL of the 1% solution contains lidocaine hydrochloride 10 mg, sodium chloride 7 mg and 1 mg methylparaben as antiseptic preservative. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg, sodium chloride 6 mg and 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. structure
LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure
Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Structure of Element
Lidocaine hydrochloride, chemical name: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride has the following structural formula: Lidocaine Hydrochloride Injection, USP intravenous for cardiac arrhythmias, is a sterile, nonpyrogenic solution prepared from lidocaine with the aid of hydrochloric acid in Water for Injection. Each mL contains: Lidocaine HCl 20 mg; Sodium Chloride 6 mg; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (pH 5.0 to 7.0). The container is for single use; solution contains no preservative. structure
Indications for Use
Uses for the temporary relief of pain and itching associated with: sunburn minor burns minor cuts scrapes insect bites minor skin irritations
LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure
Sterile isotonic solutions containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). Solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3, 4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 N0 3 M.W. 183.21 COMPOSITION OF LIDOCAINE HYDROCHLORIDE AND EPINEPHRINE INJECTION, USP BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) LIDOCAINE HCl 2% and EPINEPHRINE 1:50,000 2 1:50,000 6.5 1.2 0.25 LIDOCAINE HCl 2% and EPINEPHRINE 1:100,000 2 1:100,000 6.5 1.2 0.25 The pH of the lidocaine hydrochloride and epinephrine injection, USP solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine
LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure
By Generic Name
Drugs with the same generic name (different brands)
Use Temporarily relieves minor paln.
Use Temperarily relicwes miner pain.
use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily
Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Use: Help in temporarily slowing the onset of ejaculation
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
Uses 1.Clean hands and treatment areawith mild soap and warm water, rinsethoroughly, then gently pat dry. 2. Apply a thick layer ofnumbingcream to the treatment area, makingsure to cover both the treatment areaand its surroundings. 3. Wrap tightly with plastic wrap andwait 40-60 minutes (Longer time,better effect.) 4. Wipe away residue, and waitanother 15-25 minutes for thenumbness to peak. 5. Begin the procedure.
Uses For the physical or local anesthesia associated with tattoo
Use For the physical or local anesthesia associated with tattoo
Uses: For the temporary relief of pain and itch in minor cuts, burns, scrapes, skin irritations, insect bites and sunburn
Use for the temporary relief of pain
Idications and Usage Uses: Temporaily relieves minor pains.
Use Temporarily relieves minor pain
Use Temporarily relieves minor pain.
DIRECTIONS Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor
DIRECTIONS Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor
Use – Lidocaine Patch US 1ct for the temporary relief of pain Use – Lidocaine Patch Singles US 1ct For the temporarily relief of pain
By Substance
Drugs sharing the same substance name
USES: FOR THE TEMPORARY RELIEF OF MINOR ACHES AND PAINS OF MUSCLES AND JOINTS ASSOCIATED WITH ARTHRITIS, SIMPLE BACKACHE, STRAINS, SPRAINS, MUSCLE SORENESS AND STIFFNESS.
Store in a cool place at 59-68°F, away from direct sunlight.
Use Temporarily relieves minor paln.
For temporary relief of pain
Use Temperarily relicwes miner pain.
use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily
Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites
Store in a cool place at 59-68°F, away from direct sunlight.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Use for the temporary relief of pain
Use for the temporary relief of pain
Uses For temporary relief of minor aches and pains of muscles and joints associated with: arthritis simple backache sprains strains bruises
Use: Help in temporarily slowing the onset of ejaculation
Use For the temporary relief of pain
Uses For the temporary relief of pain.
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
By Active Ingredients
Drugs sharing any active ingredients
Uses For temporary relief of pain and itching due to minor skin irritations.
Uses For temporary relief of pain
Use For temporarily relieves pain and itching associated with minor burns, minor cuts or skin irritations
Uses For temporary relief of pain
Notice Due to the difference in temperature and skin type, the numbness effect duration will differ. Testing in a small area first is recommended to ensure the best numbness effect.
Use For temporary relief of local discomfort,itching, pain,soreness,or burning related to the tattoo process.
Use temporary relief of pain
Uses for temporary relief of pain & inflammation
Uses For the temporary relief of pain and itching, associated with minor burns,sun burn, minor cuts, scrapes, insect bites, minor skin irritations, rashes due to poison ivy, poison oak, fever blister, cold sores.
Uses Temporary relief of pain
Use For temporary relief of local discomfort,itching, pain, soreness, or burning in the perianal area associated with anorectal disorders.
Uses For temporary relief of pain
Uses For temporary relief of pain
Use For temporary relief of local and anorectal discomfort associated with anorectal discomfort or inflammation
Uses For the temporary relief of minor aches and pains.
Uses Temporarily relieves pain and itching associated with: • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations
Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.
Use For temporary relief of local discomfort, itching, pain, soreness, or burning in the perianal area associated with anorectal disorders.
Uses For temporary relief of pain
Uses Temporarily relieves minor pain