Drugs Similar to MELATONIN PRO

Straighten the cleaning solution Pour it into the cleaning position for cleaning Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes,ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Saline Solution is intended for use in OTC ear,nose,and throat devices intended specifically to administer medicinal substances to treat ear,nose,and throat disorders.These instruments include the powder blower,dropper,ear wick,manual nebulizer pump,and nasal inhaler. If using with an OTC ear,nose,or throat device,the follow the directions provided with the device and only use as directed.

Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes, ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Straighten the cleaning solution Pour it into the cleaning position for cleaning

This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. 0.308 mOsmol/mL (calc.). 0.9% Sodium Chloride Injection, USP contains no preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.3 (4.5 to 7.0). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The glass container is a Type I borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below: 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

USES: COLDS, HEADACHES, EXHAUSTION, NERVOUSNESS, SKIN AND DIGESTIVE ISSUES** **C, K, CK & X ARE HOMEOPATHIC DILUTIONS.

INDICATIONS: For weight management and inflammation support. This homeopathic product has not been evaluated by the Food and Drug Administration for safety or efficacy. FDA is not aware of scientific evidence to support homeopathy as effective.

3% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1 . Table 1. *Normal physiological osmolarity range is approximately 280 to 310 mOsmol/L. Size (mL) Composition (g/L) Ionic Concentration (mEq/L) *Osmolarity (mOsmol/L) (calc) pH Sodium Chloride, USP (NaCl) Sodium Chloride 3% Sodium Chloride Injection, USP 500 30 513 513 1,027 5.0 (4.5 to 7.0) The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Uses Temporarily relieves the symptoms of the common cold including: nasal or chest congestion, runny nose, sore throat, sneezing, cough.

Uses* ■ Helps temporarily relieve symptoms of common cold in children at night, including: ■ cough ■ runny nose ■ post nasal drip ■ sneezing ■ sore throat ■ nasal or chest congestion ■ occasional sleeplessness

Uses ■ Helps temporarily relieve symptoms of common cold in children at night, including: ■ cough ■ runny nose ■ post nasal drip ■ sneezing ■ sore throat ■ nasal or chest congestion ■ occasional sleeplessness

Uses Temporarily relieves the symptoms of the common cold in children especially at night including accumulation of mucus in chest, throat and nose, cough with mucus, runny nose, sneezing, nasal congestion and occasional sleeplessness.

Uses* ■ Helps temporarily relieve symptoms of common cold in children, including: ■ runny nose ■ sore throat ■ sneezing ■ cough ■ post nasal drip ■ nasal or chest congestion

Uses ■Temporarily relieves symptoms of common cold in children, including: ■ accumulation of mucus in chest, throat or nose ■ cough with expectoration of thick, discolored mucus ■ runny nose ■ sneezing ■ nasal or chest congestion

Uses ■ Helps temporarily relieve symptoms of stuffy nose and sinus in children, including: ■ nasal congestion ■ sinus pressure ■ headache

INDICATIONS: For temporary relief of symptoms of cough with expectoration and dyspepsia, ill effects of melons, water and dried fruits, thick yellow ropy mucous secretions.

INDICATIONS: May temporarily relieve symptoms in women such as decreased sexual desire and feelings of fatigue.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache, fatigue and detoxification stress.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms of acute and chronic sinusitis.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS AND USAGE For temporary relief of dyspepsia, flatulence, exhaustion, and nausea as a consequence of constipation.

INDICATIONS: For temporary relief of nausea with headache, dry cough, and constriction of the chest.

INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache, fatigue, and detoxification stress.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache and fatigue.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS AND USAGE For temporary relief of weakness, weariness, thirst, PMS, and bone pain. These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve minor inflammation and pressure in the eyes, burning and swelling of the eyelids.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

USES: Temporary relief of flu symptoms (early, mid-course, or recovery) such as aches, fever, chills, nausea, cough, fatigue, diarrhea.

INDICATIONS: For temporary relief of bloating of the stomach, flatulence and rhinitis.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of heartburn and distention, burning on urination, flatulence, apathy; and may improve digestion associated with fungal conditions.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS AND USAGE For temporary relief of pains throughout shoulder joint, arm, fingers, and small joints generally; swelling and tenderness of the finger and toe joints; and swellings in the joints with inflammation.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to heavy metal toxicity including cough, poor concentration, nausea, vomiting, diarrhea, stomach pain, headache, sweating, and a metallic taste in the mouth.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS AND USAGE For temporary relief of head congestion and general exhaustion as a consequence of exposure to smog, dust, or industrial agents. **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to petrochemical toxicity including rash, fever, pulmonary inflammation, fatigue, headache, muscle and joint pain, memory/attention disorders, frequent colds, insomnia, and depression.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

Recommended for minor interstinal discomfort due to indigestion including acid stomach, gas, diarrhea, and nausea. These uses are based on traditional homeopathic practice. They have not been evauated by the FDA.

INDICATIONS: For temporary relief of dyspepsia, flatulence, exhaustion, and nausea as a consequence of constipation.

INDICATIONS: For temporary relief of sour, bitter taste after eating, fullness and soreness over the liver, coated tongue, flatulence, and diarrhea alternating with constipation.