Drugs Similar to AMLODIPINE AND OLMESARTAN MEDOXOMIL
AMLODIPINE AND OLMESARTAN MEDOXOMIL
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
Amlodipine and olmesartan medoxomil tablets USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p- ( o- 1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off-white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil tablets USP also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, macrogol/polyethylene glycol 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch (maize), talc, and titanium dioxide. In addition, the 5 mg/40 mg and 10 mg/20 mg also contain iron oxide red and iron oxide yellow. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and 567.05 g/mol. It has the following structural formula: Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C 29 H 30 N 6 O 6 and 558.59 g/mol. It has the following structural formula: Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow. Amlodipine OlmesartanMedoxomil
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets is chemically described as 3-ethyl-5 methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets is chemically described as 2,3 dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p-(o -1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets contain amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is freely soluble in methanol, sparingly soluble in ethanol and slightly soluble in 2-propanol and in water. Olmesartan medoxomil is sparingly soluble in methanol and practically insoluble in water. Tablet Strength 5/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol and talc (opadry II white). Tablet Strength 5/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc and iron oxide yellow (opadry II yellow). Tablet Strength 10/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow and iron oxide red (opadry II beige). Tablet Strength 10/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow, iron oxide red and ferrosoferric oxide/ iron oxide black (opadry II brown). amlodipine structure olmesartan structure
Amlodipine and olmesartan medoxomil USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablet is chemically described as 3,5-pyridine dicarboxylic acid, 2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl,3-ethyl 5-methyl ester, (±)-monobenzene sulfonate. Its molecular formula is C 26 H 31 ClN 2 O 8 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablet is chemically described as 1H-Imadazole-5-carboxylic acid, 4-(1-hydroxy-1-methyl-ethyl)- 2-Propyl-1-[[2’-(1H tetrazole-5-yl) [1,1’-biphenyl]-4-yl]methyl-, (5- methyl-2-oxo-1, 3-dioxol-4-yl) methyl ester. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablet USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.6, respectively. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Olmesartan medoxomil USP is practically insoluble in water and in heptane, slightly soluble in ethanol (96%), sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and pregelatinized starch. The color coating contains polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. In addition, the 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg tablet also contains iron oxide black, iron oxide red and iron oxide yellow. The botanical source for pregelatinized starch is corn starch. FDA approved dissolution test specifications differ from USP. amlodipineandolmesartanmedoxomilstructure1 amlodipineandolmesartanmedoxomilstructure2
Amlodipine and olmesartan medoxomil tablets USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p- ( o- 1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off-white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil tablets USP also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, macrogol/polyethylene glycol 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch (maize), talc, and titanium dioxide. In addition, the 5 mg/40 mg and 10 mg/20 mg also contain iron oxide red and iron oxide yellow. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets is chemically described as 3-ethyl-5 methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets is chemically described as 2,3 dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p-(o -1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets contain amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is freely soluble in methanol, sparingly soluble in ethanol and slightly soluble in 2-propanol and in water. Olmesartan medoxomil is sparingly soluble in methanol and practically insoluble in water. Tablet Strength 5/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol and talc (opadry II white). Tablet Strength 5/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc and iron oxide yellow (opadry II yellow). Tablet Strength 10/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow and iron oxide red (opadry II beige). Tablet Strength 10/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow, iron oxide red and ferrosoferric oxide/ iron oxide black (opadry II brown).
Amlodipine and Olmesartan Medoxomil Tablets provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of Amlodipine and Olmesartan Medoxomil Tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of Amlodipine and Olmesartan Medoxomil Tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and Olmesartan Medoxomil Tablets contains amlodipine besylate, a white or almost white powder, and olmesartan medoxomil, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch [Botanical source: corn (zea mays)], croscarmellose sodium, stearic acid micronized, magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/polyethylene glycol 3350, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/20 mg tablets). "FDA approved dissolution test specifications differ from USP" Aml-Olm-AmlStr aml-olm-olmstr1
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
By Generic Name
Drugs with the same generic name (different brands)
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets is chemically described as 3-ethyl-5 methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets is chemically described as 2,3 dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p-(o -1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets contain amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is freely soluble in methanol, sparingly soluble in ethanol and slightly soluble in 2-propanol and in water. Olmesartan medoxomil is sparingly soluble in methanol and practically insoluble in water. Tablet Strength 5/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol and talc (opadry II white). Tablet Strength 5/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc and iron oxide yellow (opadry II yellow). Tablet Strength 10/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow and iron oxide red (opadry II beige). Tablet Strength 10/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow, iron oxide red and ferrosoferric oxide/ iron oxide black (opadry II brown).
Amlodipine and Olmesartan Medoxomil Tablets, USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. Amlodipine and Olmesartan Medoxomil Tablets, USP contain amlodipine besylate, USP and olmesartan medoxomil, USP. Amlodipine besylate, USP is chemically described as 3-ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridine dicarboxylate, monobenzenesulphonate. It is a white to off-white crystalline powder that is freely soluble in methanol, sparingly soluble in alcohol and slightly soluble in water and 2-propanol. The molecular formula and weight of amlodipine besylate, USP are C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and 567.05 g/mol. It has the following structural formula: Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan medoxomil, USP is chemically described as 1H-imidazole-5-carboxylic acid, 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl] methyl]-(5-methyl-2-oxo-1,3-dioxol-4-yl) methyl ester. It is a white to off-white crystalline powder that is sparingly soluble in methanol, practically insoluble in water, slightly soluble in acetone, and very slightly soluble in ethanol. The molecular formula and weight of olmesartan medoxomil, USP are C 29 H 30 N 6 O 6 and 558.59 g/mol. It has the following structural formula: Each tablet of Amlodipine and Olmesartan Medoxomil Tablets, USP also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized corn starch. The color coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol 3350, talc, and titanium dioxide. The 5 mg/40 mg tablets also contain iron oxide yellow. The 10 mg/20 mg tablets and 10 mg/40 mg tablets also contain iron oxide red and iron oxide yellow. Amlodipine OlmesartanMedoxomil
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil tablets USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p- ( o- 1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off-white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil tablets USP also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, macrogol/polyethylene glycol 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch (maize), talc, and titanium dioxide. In addition, the 5 mg/40 mg and 10 mg/20 mg also contain iron oxide red and iron oxide yellow. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil tablets USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p- ( o- 1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off-white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil tablets USP also contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, macrogol/polyethylene glycol 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch (maize), talc, and titanium dioxide. In addition, the 5 mg/40 mg and 10 mg/20 mg also contain iron oxide red and iron oxide yellow. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and Olmesartan Medoxomil Tablets provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of Amlodipine and Olmesartan Medoxomil Tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of Amlodipine and Olmesartan Medoxomil Tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and Olmesartan Medoxomil Tablets contains amlodipine besylate, a white or almost white powder, and olmesartan medoxomil, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Each tablet of Amlodipine and Olmesartan Medoxomil Tablets also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch [Botanical source: corn (zea mays)], croscarmellose sodium, stearic acid micronized, magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/polyethylene glycol 3350, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/20 mg tablets). "FDA approved dissolution test specifications differ from USP" Aml-Olm-AmlStr aml-olm-olmstr1
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure
Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablets is chemically described as 3-ethyl-5 methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablets is chemically described as 2,3 dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p-(o -1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablets contain amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white, crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.59, respectively. Amlodipine besylate is freely soluble in methanol, sparingly soluble in ethanol and slightly soluble in 2-propanol and in water. Olmesartan medoxomil is sparingly soluble in methanol and practically insoluble in water. Tablet Strength 5/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol and talc (opadry II white). Tablet Strength 5/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc and iron oxide yellow (opadry II yellow). Tablet Strength 10/20 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow and iron oxide red (opadry II beige). Tablet Strength 10/40 mg Each tablet of amlodipine and olmesartan medoxomil tablets also contains the following inactive ingredients: croscarmellose sodium, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose and the color coatings contain polyvinyl alcohol, titanium dioxide, macrogol, talc, iron oxide yellow, iron oxide red and ferrosoferric oxide/ iron oxide black (opadry II brown). amlodipine structure olmesartan structure
Amlodipine and olmesartan medoxomil USP provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate and the angiotensin II receptor blocker (ARB) olmesartan medoxomil. The amlodipine besylate component of amlodipine and olmesartan medoxomil tablet is chemically described as 3,5-pyridine dicarboxylic acid, 2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl,3-ethyl 5-methyl ester, (±)-monobenzene sulfonate. Its molecular formula is C 26 H 31 ClN 2 O 8 S. Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of amlodipine and olmesartan medoxomil tablet is chemically described as 1H-Imadazole-5-carboxylic acid, 4-(1-hydroxy-1-methyl-ethyl)- 2-Propyl-1-[[2’-(1H tetrazole-5-yl) [1,1’-biphenyl]-4-yl]methyl-, (5- methyl-2-oxo-1, 3-dioxol-4-yl) methyl ester. Its molecular formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate is: The structural formula for olmesartan medoxomil is: Amlodipine and olmesartan medoxomil tablet USP contains amlodipine besylate USP, a white or almost white powder, and olmesartan medoxomil USP, a white to off white crystalline powder. The molecular weights of amlodipine besylate and olmesartan medoxomil are 567.1 and 558.6, respectively. Amlodipine besylate USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Olmesartan medoxomil USP is practically insoluble in water and in heptane, slightly soluble in ethanol (96%), sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and pregelatinized starch. The color coating contains polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. In addition, the 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg tablet also contains iron oxide black, iron oxide red and iron oxide yellow. The botanical source for pregelatinized starch is corn starch. FDA approved dissolution test specifications differ from USP. amlodipineandolmesartanmedoxomilstructure1 amlodipineandolmesartanmedoxomilstructure2
By Substance
Drugs sharing the same substance name
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate. Amlodipine Structure
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: structure Amlodipine besylate is a white or almost white powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white to off white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate.
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate, USP is a white or almost white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Each amlodipine besylate tablet, USP intended for oral administration contains 2.5 mg, 5 mg or 10 mg of amlodipine besylate. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structured formula for Amlodipine
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate. amlodipine-str-2
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets USP are formulated as tablets equivalent to 2.5 mg, 5 mg and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dicalcium phosphate anhydrous, FD & C red no. 40 aluminum lake (only for 2.5 mg strength), magnesium stearate, microcrystalline cellulose and povidone. Amlodipine besylate tablets USP meet USP Dissolution Test 2. Amlodipine Besylate
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent. structure
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent. structure
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its structural formula is: C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S M.W. 567.1 Amlodipine besylate, USP is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets USP are formulated as white to off-white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: calcium phosphate dibasic anhydrous, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. chemical structure
Amlodipine besylate tablets, USP is the besylate salt of amlodipine besylate, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2 O5 ·C6 H6 O3 S, and its structural formula is : Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine besylate for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and corn starch. chemstruc
Amlodipine besylate is the besylate salt of amlodipine, a long‑acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4‑(2‑chlorophenyl)‑1,4‑dihydro‑6‑methyl‑3,5‑pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate. Amlodipine besylate structural formula
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets USP are formulated as tablets equivalent to 2.5 mg, 5 mg and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: colloidal silicon dioxide, dicalcium phosphate anhydrous, FD & C red no. 40 aluminum lake (only for 2.5 mg strength), magnesium stearate, microcrystalline cellulose and povidone. Amlodipine besylate tablets USP meet USP Dissolution Test 2. Amlodipine Besylate
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent.
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate. image
Amlodipine besylate tablets, USP is the besylate salt of amlodipine besylate, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2 O5 ·C6 H6 O3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine besylate for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and corn starch. chemstruc
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy) methyl]-4-(2-chlorophenyl)-1, 4-dihydro-6-methyl-3, 5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white or almost white powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white to off white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate. Image
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5•C6H6O3S, and its structural formula is: [amlodipine-str-2] Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate.
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate. amlodipine-str-2
Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S, and its structural formula is: Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, corn starch, sodium starch glycolate and magnesium stearate. structural-formula-of-amlodipine-besylate
Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C20H25ClN2O5•C6H6O3S and its structural formula is: [structure] Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent.