Drugs Similar to SOLU-CORTEF
HYDROCORTISONE SODIUM SUCCINATE
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain—Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE & ADMINISTRATION , Preparation of Solutions). The diluent, as part of the packaging presentation for the ACT-O-VIAL® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. TABEL STRUCTURE
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain—Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE & ADMINISTRATION , Preparation of Solutions). The diluent, as part of the packaging presentation for the ACT-O-VIAL® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. TABEL STRUCTURE
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
By Generic Name
Drugs with the same generic name (different brands)
Hydrocortisone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate, USP as the active ingredient. Hydrocortisone sodium succinate for injection, USP is available in below mentioned package for intravenous or intramuscular administration. 100 mg Plain —Vials containing hydrocortisone sodium succinate, USP equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. Hydrocortisone sodium succinate for injection, USP 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION , Preparation of Solutions ). When necessary, the pH was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Image
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
By Substance
Drugs sharing the same substance name
Hydrocortisone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate, USP as the active ingredient. Hydrocortisone sodium succinate for injection, USP is available in below mentioned package for intravenous or intramuscular administration. 100 mg Plain —Vials containing hydrocortisone sodium succinate, USP equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. Hydrocortisone sodium succinate for injection, USP 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION , Preparation of Solutions ). When necessary, the pH was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Image
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain—Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE & ADMINISTRATION , Preparation of Solutions). The diluent, as part of the packaging presentation for the ACT-O-VIAL® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. TABEL STRUCTURE
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions ). ACT-O-VIAL ® System (Single-Dose Vial) in four strengths: 100 mg ACT-O-VIAL 250 mg ACT-O-VIAL 500 mg ACT-O-VIAL 1,000 mg ACT-O-VIAL Each 2 mL contains (when mixed): Each 2 mL contains (when mixed): Each 4 mL contains (when mixed): Each 8 mL contains (when mixed): Hydrocortisone sodium succinate equiv. to 100 mg Hydrocortisone equiv. to 250 mg Hydrocortisone equiv. to 500 mg Hydrocortisone equiv. to 1,000 mg Hydrocortisone Monobasic sodium phosphate anhydrous 0.8 mg 2 mg 4 mg 8 mg Dibasic sodium phosphate dried 8.73 mg 21.8 mg 44 mg 87.32 mg The diluent, as part of the packaging presentation for the ACT-O-VIAL ® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. Chemical Structure
SOLU-CORTEF Sterile Powder is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate as the active ingredient. SOLU-CORTEF Sterile Powder is available in several packages for intravenous or intramuscular administration. 100 mg Plain—Vials containing hydrocortisone sodium succinate equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. SOLU-CORTEF 100 mg plain does not contain diluent (see DOSAGE & ADMINISTRATION , Preparation of Solutions). The diluent, as part of the packaging presentation for the ACT-O-VIAL® system, is comprised of Water for Injection only, and does not contain any preservative. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below: Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform. TABEL STRUCTURE