Drugs Similar to LIDOCAINE

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See Error! Hyperlink reference not valid. for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Structure of Element

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino) -N- (2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: Each gram of the flavored ointment contains lidocaine, 50 mg, polyethylene glycol 400, polyethylene glycol 3350, propylene glycol and spearmint flavor. Chemical Structure

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of lidocaine ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine, USP) 5% in a water miscible ointment vehicle containing polyethylene glycols. structure

Uses For the temporary relief of pain, itching and burning associated with hemorrhoids and other anorectal disorders.

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICAT IONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment 5% : acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols.

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-,and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Description

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: [Image] Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols.

LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Structure of Element

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Structure of Element

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. structuralformula

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. chemical structure for lidocaine

Lidocaine HCl 2% Jelly is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). Lidocaine HCl 2% Jelly contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Its molecular formula is C 14 H 22 N 2 O • HCl and its molecular weight is 270.80. Lidocaine HCl 2% Jelly also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine HCl 2% Jelly 30 mL and 5 mL tubes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains methylparaben, propylparaben, hypromellose, and sodium hydroxide and/or hydrochloric acid to adjust pH to 6.0 to 7.0. Structural Formula

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea. chemical structure

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of lidocaine ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine, USP) 5% in a water miscible ointment vehicle containing polyethylene glycols. structure

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- α -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 lidocaine hydrochloride Epinephrine

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. Structure of Element

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Description

Sterile isotonic solutions containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). Solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3, 4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 N0 3 M.W. 183.21 COMPOSITION OF LIDOCAINE HYDROCHLORIDE AND EPINEPHRINE INJECTION, USP BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) LIDOCAINE HCl 2% and EPINEPHRINE 1:50,000 2 1:50,000 6.5 1.2 0.25 LIDOCAINE HCl 2% and EPINEPHRINE 1:100,000 2 1:100,000 6.5 1.2 0.25 The pH of the lidocaine hydrochloride and epinephrine injection, USP solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- α -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula C 14 H 22 N 2 0HCl H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 PRODUCT IDENTIFICATION COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula C 14 H 22 N 2 0•HCl• H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 lidocaine hydrochloride epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula : C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula : C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 Chemical Structure Chemical Structure

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula : C 14 H 22 N 2 0•HCl• H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula : C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 Chemical Structure Chemical Structure

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula C 14 H 22 N 2 0 HCl H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. Lidocaine Hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- α -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- α -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula C 14 H 22 N 2 0 HCl H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. Lidocaine Hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula : C 14 H 22 N 2 0•HCl• H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula : C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) The pH of all solutions are adjusted to USP limits with sodium hydroxide. 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 Chemical Structure Chemical Structure

2% Xylocaine DENTAL with Epinephrine 1:50,000 and 2% Xylocaine DENTAL with Epinephrine 1:100,000 are sterile isotonic solutions containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). 2% Xylocaine DENTAL solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 O • HCI • H 2 O M.W. 288.8 Epinephrine is (-)-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 The pH of the 2% Xylocaine DENTAL solutions are adjusted to USP limits with sodium hydroxide. COMPOSITION OF THE 2% Xylocaine DENTAL INJECTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2% Xylocaine Dental with Epinephrine 1:50,000 2 1:50,000 6.5 1.2 0.25 2% Xylocaine Dental with Epinephrine 1:100,000 2 1:100,000 6.5 1.2 0.25 The pH of the 2% Xylocaine DENTAL solutions are adjusted to USP limits with sodium hydroxide. Lidocaine Hydrochloride Epinephrine

Uses for the temporary relief of pain and itching associated with • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Use(s) For the temporary relief of pain associated with minor burns

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

​Uses Temporary pain relief associated with minor burns

Use(s) For temporary relief of pain and itching associated with: • Sunburn • Minor burns • Insect bites • Cuts • Scrapes

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Availability Structure

Uses Uses For temporary relief of minor aches & pains of muscles & joints associated with: simple backache arthritis strains bruises sprains

Uses Uses For temporary relief of pain

Uses: For the temporary relief of pain and itching.

Uses for the temporary relief of pain and itching associated with cold sores and fever blisters Relieves dryness and softens cold sores and fever blisters Softens crust (scabs) associated with cold sores and fever blisters

USE for the temporary relief of pain

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. structural formula lidocaine hydrochloride

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS for specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Structural Formula

Use For the temporary relief of pain and discomfort associated with anorectal disorders.

Uses Provides temporary relief from pain and itching caused by sunburns, minor cuts, insect bites, and skin irritations.

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Minor Cuts & Scrapes Insect Bites

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Cuts & Scrapes Insect Bites