Naloxone Hydrochloride NALOXONE HYDROCHLORIDE MYLAN INSTITUTIONAL LLC FDA Approved Naloxone hydrochloride injection, USP, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride, USP occurs as a white to slightly off-white powder, and is soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and in chloroform. Naloxone hydrochloride injection, USP is available as a sterile, clear, colorless solution for intravenous, intramuscular and subcutaneous administration in 1 mg of naloxone hydrochloride USP per mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is available as an unpreserved, paraben-free formulation. Naloxone Hydrochloride Dihydrate Structural Formula
FunFoxMeds box
Route
INTRAMUSCULAR INTRAVENOUS SUBCUTANEOUS
Applications
ANDA213843
Package NDC

Drug Facts

Composition & Profile

Strengths
2 ml 2 mg/2 ml 1 mg/ml
Quantities
2 ml
Treats Conditions
Indications And Usage Naloxone Hydrochloride Injection Is Indicated For The Complete Or Partial Reversal Of Opioid Depression Including Respiratory Depression Induced By Natural And Synthetic Opioids Including Propoxyphene Methadone And Certain Mixed Agonist Antagonist Analgesics Nalbuphine Pentazocine Butorphanol And Cyclazocine Naloxone Hydrochloride Injection Is Also Indicated For Diagnosis Of Suspected Or Known Acute Opioid Overdosage Naloxone Hydrochloride Injection May Be Useful As An Adjunctive Agent To Increase Blood Pressure In The Management Of Septic Shock See Clinical Pharmacology Adjunctive Use In Septic Shock

Identifiers & Packaging

Container Type BOX
All Product Codes
UPC
0367457992020
UNII
F850569PQR
Packaging

HOW SUPPLIED Naloxone hydrochloride injection, USP is supplied as a kit containing a 2 mL single-dose prefilled syringe with luer lock adaptor and rigid tip cap, and a 21-gauge, 1½ inch needle with needle-stick protection device. Naloxone Hydrochloride Injection USP, 2 mg/2 mL (1 mg/mL) One 2 mL Single-Dose Prefilled Syringe, Packaged in a Carton with 1 Needle NDC-67457-992-02 Store at 25ºC (77ºF); excursions permitted to 15º to 30ºC (59º to 86ºF). [See USP Controlled Room Temperature.] Protect from light. Store in carton until contents have been used.; PRINCIPAL DISPLAY PANEL -2 mg/2 mL (1 mg/mL) NDC 67457-992-02 Naloxone Hydrochloride Injection, USP 2 mg/2 mL (1 mg/mL) For Intravenous, Intramuscular or Subcutaneous Use / An Opioid Antagonist Single Dose, do not reuse or resterilize. Sterile Rx only Each Carton Contains: One 2 mL Single-Dose Prefilled Syringe. One 21-Gauge, 1½ Inch Needle. 2 mL Single-Dose Disposable Prefilled Syringe Each mL contains naloxone hydrochloride, USP, 1 mg; and sodium chloride, 9 mg, pH adjusted with hydrochloric acid to meet USP limits of 3.5 ± 0.5. Medication and fluid pathway sterile and nonpyrogenic in original, unopened package, with component cap in place. Do not remove cap until ready to use. Single Dose/No Preservative added/Protect from light. Discard unused portion. Store at 25°C (77°F); excursions permitted between 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.]/Usual Dosage: See Insert. INSTRUCTIONS FOR USE 1. Hold the syringe upright, remove the threaded plastic rigid tip cap with an easy anti-clockwise twisting motion. 2. Peel the safety needle pouch half way open. Grasp the needle sheath using the plastic peel pouch. Attach the safety needle to the luer connection of the syringe with an easy clockwise twisting motion. 3. Pull the needle sheath away from the needle with a straight pull. Do not twist the sheath as the needle may be loosened from the syringe. 4. Bring the syringe with the attached needle in upright position to de-aerate. De-aerate the syringe by moving the plunger rod carefully forward. 5. After the injection is complete, use either thumb or finger of one hand or a flat surface to activate the needle protection system. The needle protection system is fully activated when a ‘click’ is heard. Discard the syringe with needle appropriately. Manufactured for: Mylan Institutional LLC Morgantown, WV 26505 U.S.A. Made in India Code No.: KR/DRUGS/KTK/28/384/2009 Step 1 Step 2 Step 3 Step 4 Step 5 2 mg/2 mL (1 mg/mL) Carton Label

Package Descriptions
  • HOW SUPPLIED Naloxone hydrochloride injection, USP is supplied as a kit containing a 2 mL single-dose prefilled syringe with luer lock adaptor and rigid tip cap, and a 21-gauge, 1½ inch needle with needle-stick protection device. Naloxone Hydrochloride Injection USP, 2 mg/2 mL (1 mg/mL) One 2 mL Single-Dose Prefilled Syringe, Packaged in a Carton with 1 Needle NDC-67457-992-02 Store at 25ºC (77ºF); excursions permitted to 15º to 30ºC (59º to 86ºF). [See USP Controlled Room Temperature.] Protect from light. Store in carton until contents have been used.
  • PRINCIPAL DISPLAY PANEL -2 mg/2 mL (1 mg/mL) NDC 67457-992-02 Naloxone Hydrochloride Injection, USP 2 mg/2 mL (1 mg/mL) For Intravenous, Intramuscular or Subcutaneous Use / An Opioid Antagonist Single Dose, do not reuse or resterilize. Sterile Rx only Each Carton Contains: One 2 mL Single-Dose Prefilled Syringe. One 21-Gauge, 1½ Inch Needle. 2 mL Single-Dose Disposable Prefilled Syringe Each mL contains naloxone hydrochloride, USP, 1 mg; and sodium chloride, 9 mg, pH adjusted with hydrochloric acid to meet USP limits of 3.5 ± 0.5. Medication and fluid pathway sterile and nonpyrogenic in original, unopened package, with component cap in place. Do not remove cap until ready to use. Single Dose/No Preservative added/Protect from light. Discard unused portion. Store at 25°C (77°F); excursions permitted between 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.]/Usual Dosage: See Insert. INSTRUCTIONS FOR USE 1. Hold the syringe upright, remove the threaded plastic rigid tip cap with an easy anti-clockwise twisting motion. 2. Peel the safety needle pouch half way open. Grasp the needle sheath using the plastic peel pouch. Attach the safety needle to the luer connection of the syringe with an easy clockwise twisting motion. 3. Pull the needle sheath away from the needle with a straight pull. Do not twist the sheath as the needle may be loosened from the syringe. 4. Bring the syringe with the attached needle in upright position to de-aerate. De-aerate the syringe by moving the plunger rod carefully forward. 5. After the injection is complete, use either thumb or finger of one hand or a flat surface to activate the needle protection system. The needle protection system is fully activated when a ‘click’ is heard. Discard the syringe with needle appropriately. Manufactured for: Mylan Institutional LLC Morgantown, WV 26505 U.S.A. Made in India Code No.: KR/DRUGS/KTK/28/384/2009 Step 1 Step 2 Step 3 Step 4 Step 5 2 mg/2 mL (1 mg/mL) Carton Label

Overview

Naloxone hydrochloride injection, USP, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride, USP occurs as a white to slightly off-white powder, and is soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and in chloroform. Naloxone hydrochloride injection, USP is available as a sterile, clear, colorless solution for intravenous, intramuscular and subcutaneous administration in 1 mg of naloxone hydrochloride USP per mL concentration. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. Each mL also contains 9 mg of sodium chloride. Naloxone hydrochloride injection, USP is available as an unpreserved, paraben-free formulation. Naloxone Hydrochloride Dihydrate Structural Formula

Indications & Usage

Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone hydrochloride injection is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock ).

Dosage & Administration

Naloxone hydrochloride injection may be administered intravenously, intramuscularly, or subcutaneously. The most rapid onset of action is achieved by intravenous administration, which is recommended in emergency situations. Since the duration of action of some opioids may exceed that of naloxone hydrochloride injection, the patient should be kept under continued surveillance. Repeated doses of naloxone hydrochloride injection should be administered, as necessary. Naloxone hydrochloride injection is a single-dose, prefilled syringe. Discard unused portion. Intravenous Infusion Naloxone hydrochloride injection may be diluted for intravenous infusion in normal saline or 5% dextrose solutions. The addition of 2 mg of naloxone hydrochloride injection in 500 mL of either solution provides a concentration of 0.004 mg/mL. Mixtures should be used within 24 hours. After 24 hours, the remaining unused mixture must be discarded. The rate of administration should be titrated in accordance with the patient’s response. Naloxone hydrochloride injection should not be mixed with preparations containing bisulfite, metabisulfite, long-chain or high molecular weight anions, or any solution having an alkaline pH. No drug or chemical agent should be added to naloxone hydrochloride injection unless its effect on the chemical and physical stability of the solution has first been established. General Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Usage in Adults Opioid Overdose–Known or Suspected An initial dose of 0.4 mg to 2 mg of naloxone hydrochloride injection may be administered intravenously. If the desired degree of counteraction and improvement in respiratory functions are not obtained, it may be repeated at two- to three-minute intervals. If no response is observed after 10 mg of naloxone hydrochloride injection have been administered, the diagnosis of opioid-induced or partial opioid-induced toxicity should be questioned. Intramuscular or subcutaneous administration may be necessary if the intravenous route is not available. Postoperative Opioid Depression For the partial reversal of opioid depression following the use of opioids during surgery, smaller doses of naloxone hydrochloride injection are usually sufficient. The dose of naloxone hydrochloride injection should be titrated according to the patient’s response. For the initial reversal of respiratory depression, naloxone hydrochloride injection should be injected in increments of 0.1 mg to 0.2 mg intravenously at two- to three-minute intervals to the desired degree of reversal, i.e., adequate ventilation and alertness without significant pain or discomfort. Larger than necessary dosage of naloxone hydrochloride injection may result in significant reversal of analgesia and increase in blood pressure. Similarly, too rapid reversal may induce nausea, vomiting, sweating or circulatory stress. Repeat doses of naloxone hydrochloride injection may be required within one- to two-hour intervals depending upon the amount, type (i.e., short or long acting) and time interval since last administration of an opioid. Supplemental intramuscular doses have been shown to produce a longer lasting effect. Septic Shock The optimal dosage of naloxone hydrochloride injection or duration of therapy for the treatment of hypotension in septic shock patients has not been established (see CLINICAL PHARMACOLOGY ). Usage in Children Opioid Overdose–Known or Suspected: The usual initial dose in children is 0.01 mg/kg body weight given I.V. If this dose does not result in the desired degree of clinical improvement, a subsequent dose of 0.1 mg/kg body weight may be administered. If an I.V. route of administration is not available, naloxone hydrochloride injection may be administered I.M. or S.C. in divided doses. If necessary, naloxone hydrochloride injection can be diluted with sterile water for injection. Postoperative Opioid Depression: Follow the recommendations and cautions under Adult Postoperative Depression . For the initial reversal of respiratory depression, naloxone hydrochloride injection should be injected in increments of 0.005 mg to 0.01 mg intravenously at two- to three-minute intervals to the desired degree of reversal. Usage in Neonates Opioid-induced Depression: The usual initial dose is 0.01 mg/kg body weight administered I.V., I.M. or S.C. This dose may be repeated in accordance with adult administration guidelines for postoperative opioid depression.

Warnings & Precautions
WARNINGS Drug Dependence Naloxone hydrochloride should be administered cautiously to persons including newborns of mothers who are known or suspected to be physically dependent on opioids. In such cases an abrupt and complete reversal of opioid effects may precipitate an acute withdrawal syndrome. The signs and symptoms of opioid withdrawal in a patient physically dependent on opioids may include, but are not limited to, the following: body aches, diarrhea, tachycardia, fever, runny nose, sneezing, piloerection, sweating, yawning, nausea or vomiting, nervousness, restlessness or irritability, shivering or trembling, abdominal cramps, weakness, and increased blood pressure. In the neonate, opioid withdrawal may also include: convulsions, excessive crying, and hyperactive reflexes. Repeat Administration The patient who has satisfactorily responded to naloxone hydrochloride should be kept under continued surveillance and repeated doses of naloxone hydrochloride should be administered, as necessary, since the duration of action of some opioids may exceed that of naloxone hydrochloride. Respiratory Depression due to Other Drugs Naloxone hydrochloride is not effective against respiratory depression due to non-opioid drugs and in the management of acute toxicity caused by levopropoxyphene. Reversal of respiratory depression by partial agonists or mixed agonist/antagonists, such as buprenorphine and pentazocine, may be incomplete or require higher doses of naloxone. If an incomplete response occurs, respirations should be mechanically assisted as clinically indicated.
Contraindications

Naloxone hydrochloride injection is contraindicated in patients known to be hypersensitive to naloxone hydrochloride or to any of the other ingredients in naloxone hydrochloride.

Adverse Reactions

Postoperative The following adverse events have been associated with the use of naloxone hydrochloride in postoperative patients: hypotension, hypertension, ventricular tachycardia and fibrillation, dyspnea, pulmonary edema, and cardiac arrest. Death, coma, and encephalopathy have been reported as sequelae of these events. Excessive doses of naloxone hydrochloride in postoperative patients may result in significant reversal of analgesia and may cause agitation (see PRECAUTIONS and DOSAGE AND ADMINISTRATION; Usage in Adults-Postoperative Opioid Depression ). Opioid Depression Abrupt reversal of opioid depression may result in nausea, vomiting, sweating, tachycardia, increased blood pressure, tremulousness, seizures, ventricular tachycardia and fibrillation, pulmonary edema, and cardiac arrest which may result in death (see PRECAUTIONS ). Opioid Dependence Abrupt reversal of opioid effects in persons who are physically dependent on opioids may precipitate an acute withdrawal syndrome which may include, but is not limited to, the following signs and symptoms: body aches, fever, sweating, runny nose, sneezing, piloerection, yawning, weakness, shivering or trembling, nervousness, restlessness or irritability, diarrhea, nausea or vomiting, abdominal cramps, increased blood pressure, tachycardia. In the neonate, opioid withdrawal may also include: convulsions; excessive crying; hyperactive reflexes (see WARNINGS ). Adverse events associated with the postoperative use of naloxone hydrochloride are listed by organ system and in decreasing order of frequency as follows: Cardiac Disorders: pulmonary edema, cardiac arrest or failure, tachycardia, ventricular fibrillation, and ventricular tachycardia. Death, coma, and encephalopathy have been reported as sequelae of these events. Gastrointestinal Disorders: vomiting, nausea Nervous System Disorders: convulsions, paraesthesia, grand mal convulsion Psychiatric Disorders: agitation, hallucination, tremulousness Respiratory, Thoracic and Mediastinal Disorders: dyspnea, respiratory depression, hypoxia Skin and Subcutaneous Tissue Disorders: nonspecific injection site reactions, sweating Vascular Disorders: hypertension, hypotension, hot flushes or flushing. See also PRECAUTIONS and DOSAGE AND ADMINISTRATION; Usage in Adults; Postoperative Opioid Depression. To report SUSPECTED ADVERSE REACTIONS, contact Mylan at 1-877-446-3679 (1-877-4-INFO-RX) or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.)

Drug Interactions

Large doses of naloxone are required to antagonize buprenorphine since the latter has a long duration of action due to its slow rate of binding and subsequent slow dissociation from the opioid receptor. Buprenorphine antagonism is characterized by a gradual onset of the reversal effects and a decreased duration of action of the normally prolonged respiratory depression. The barbiturate methohexital appears to block the acute onset of withdrawal symptoms induced by naloxone in opiate addicts.


Similar Drugs

Related medications based on brand, generic name, substance, active ingredients.

View all similar drugs →