Drugs Similar to THE SKIN HOUSE ROSE HEAVENCREAM
ADENOSINE NIACINAMIDE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
apply proper amount to the skin
In the last step of basic care, apply an appropriate amount to the face, neck, arms, legs, etc. that are prone to UV exposure.
Take an appropriate amount of this product and spread it evenly on the skin
How to use; At the last stage of basic care, apply an appropriate amount to the face, neck, arms, and legs that are easily exposed to UV rays.
At the last step of skincare, take an appropriate amount and spread it all over your face and absorb it
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. structure
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each Adenosine Injection, USP vial contains a sterile, non-pyrogenic solution of adenosine 3 mg per mL and sodium chloride 9 mg per mL in water for injection, with pH between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. formula1.jpg
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac ® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structural-formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
By Active Ingredients
Drugs sharing any active ingredients
take appropriate amount and apply onto all over face after shaving or facial wash
Apply proper amount to the skin.
apply an appropriate amount to the hand
Take an appropriate amount of this product and spread it evenly on the skin.
After cleansing, use toner to smooth the skin texture. Apply an adequate amount of the emulsion to the face, and spread it softly. Pat your face to be absorbed completely.
All year-round. Apply every morning at the end of the skincare routine of going out.
apply evenly on face and pat gently for absorption
After face wash, apply suitable toner and ampoule for your skin type. Apply proper amount of the product onto the face softly by gently patting.
Summary not available yet.
Open the pouch and take out a mask. Remove films on the both side and attach to face for 20~40 minutes, then remove the mask.
■Wet hair with worm water ■Apply the shampoo work into a rich lather ■Massage thoroughly into the hair and scalp ■Rinse well and repeat to maximize results
Directions Spray 20cm apart on the face 2 to 3 times and pat it with clean hands to absorb it. Spray it frequently even after putting on makeup helps dry skin
After toning, apply a proper amount of the cream onto the damaged eye rims and gently massage to soak in.
Stop use if rash or irritation develops and lasts. Keep out of eyes. Rinse with water to remove.
Shake the facial mist up before use as it is an oil in liquid formula. Close your eyes and spray the mist onto your face and tap lightly with fingers for full absorption.
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and pat the remaining ampoule into skin for better absorption. To finish, apply your face cream.
* We recommend a usage depending on one’s scalp type, as follows: - Oily scalp: morning/evening shampoo (twice a day) - Neutral scalp: shampoo once a day - Dry scalp: shampoo once every two days. Wet hair with lukewarm water to open scalp pores. Pump a sufficient amount of Scalp Scaling Shampoo into hands, apply to scalp and massage gently for 2 minutes to remove sebum and dead skins. In massaging like movements, scrub hair & scalp for around 3 minutes before rinsing, to allow absorption of nutrients by scalp. - To prevent nutrients absorbed by pores from falling out, rinse with water cooler than body temperature. - Covering scalp with shampoo foam for more than 5 minutes may cause scalp irritability. Dry hair with blow-dryer using cool air. - Healthy scalp maintains a sub-acidity state of 4.5-5.5 Ph to protect hair from harmful bacteria. The Scalp Scaling Shampoo balances scalp to a 5.5 Ph, allowing for an optimal and healthy scalp.
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and pat the remaining ampoule into skin for better absorption. To finish, apply your face cream.
Summary not available yet.
Hand Cream : After Washing hands, Gently rub and massage hands with the hand cream. Lip Balm : Apply the lip balm on lips for moisturizing.