Drugs Similar to HERPLEX

USES: Herplex can be used for temporarily relieve pain and itching during outbreads of cold sores and fever blisters.

USES: Herplex can be used for temporarily relieve pain and itching during outbreads of cold sores and fever blisters.

USES: Herplex can be used for temporarily relieve pain and itching during outbreads of cold sores and fever blisters.

USES: Herplex can be used for temporarily relieve pain and itching during outbreads of cold sores and fever blisters.

Straighten the cleaning solution Pour it into the cleaning position for cleaning Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes,ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Saline Solution is intended for use in OTC ear,nose,and throat devices intended specifically to administer medicinal substances to treat ear,nose,and throat disorders.These instruments include the powder blower,dropper,ear wick,manual nebulizer pump,and nasal inhaler. If using with an OTC ear,nose,or throat device,the follow the directions provided with the device and only use as directed.

Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes, ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Straighten the cleaning solution Pour it into the cleaning position for cleaning

Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below: 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. 0.308 mOsmol/mL (calc.). 0.9% Sodium Chloride Injection, USP contains no preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.3 (4.5 to 7.0). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The glass container is a Type I borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

USES: COLDS, HEADACHES, EXHAUSTION, NERVOUSNESS, SKIN AND DIGESTIVE ISSUES** **C, K, CK & X ARE HOMEOPATHIC DILUTIONS.

INDICATIONS: For weight management and inflammation support. This homeopathic product has not been evaluated by the Food and Drug Administration for safety or efficacy. FDA is not aware of scientific evidence to support homeopathy as effective.

3% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1 . Table 1. *Normal physiological osmolarity range is approximately 280 to 310 mOsmol/L. Size (mL) Composition (g/L) Ionic Concentration (mEq/L) *Osmolarity (mOsmol/L) (calc) pH Sodium Chloride, USP (NaCl) Sodium Chloride 3% Sodium Chloride Injection, USP 500 30 513 513 1,027 5.0 (4.5 to 7.0) The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Uses Temporarily relieves the symptoms of the common cold including: nasal or chest congestion, runny nose, sore throat, sneezing, cough.

Uses* ■ Helps temporarily relieve symptoms of common cold in children at night, including: ■ cough ■ runny nose ■ post nasal drip ■ sneezing ■ sore throat ■ nasal or chest congestion ■ occasional sleeplessness

Uses ■ Helps temporarily relieve symptoms of common cold in children at night, including: ■ cough ■ runny nose ■ post nasal drip ■ sneezing ■ sore throat ■ nasal or chest congestion ■ occasional sleeplessness

Uses Temporarily relieves the symptoms of the common cold in children especially at night including accumulation of mucus in chest, throat and nose, cough with mucus, runny nose, sneezing, nasal congestion and occasional sleeplessness.

Uses* ■ Helps temporarily relieve symptoms of common cold in children, including: ■ runny nose ■ sore throat ■ sneezing ■ cough ■ post nasal drip ■ nasal or chest congestion

Uses ■Temporarily relieves symptoms of common cold in children, including: ■ accumulation of mucus in chest, throat or nose ■ cough with expectoration of thick, discolored mucus ■ runny nose ■ sneezing ■ nasal or chest congestion

Uses † for temporary relief of: physical fatigue mental and emotional fatigue nervous exhaustion sluggish mind poor concentration weariness confusion apathy irritability indifference body aches lack of focus eyes sensitive to light digestive symptoms caused by stress light-headed upon standing up † Claims based on traditional Homeopathic practice, not accepted medical evidence, not FDA evaluated.

USES: Temporary relief of bloating, fatigue, headaches, white-coated tongue, skin irritation.

INDICATIONS: For temporary relief of symptoms related to Epstein-Barr virus, fibromyalgia, or chronic fatigue syndrome including sore throat, fatigue, joint pain, muscle pain, foggy thinking, and swollen lymph glands.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat, metabolism, headache, fatigue, and detoxification stress.

INDICATIONS: Temporarily relieves symptoms associated with acne: • pimples • redness • itching • inflammation.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve symptoms due to fluid retention and anxiety.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

INDICATIONS: For temporary relief of symptoms due to chronic fatigue, lowered metabolism, and thyroid dysfunction.

INDICATIONS: May provide temporary relief of subjective pain due to inflammation and/or injury.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of symptoms due to skin eruptions and psoriasis.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms of Herpes Zoster such as burning pain, tickling, numbness, swelling and tenderness and extreme sensitivity to touch.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve pain due to inflammation caused by but not limited to the following: sprains, minor joint inflammation, trauma.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve pain due to inflammation caused by but not limited to the following: pressure, tension, trauma.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms of Herpes Simplex such as painful eruptions of lips, genitals, vesicular/blister of lips and genitals, tingling of lips, fatigue, irritability, fever, body aches and burning during urination.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, and detoxification of stress.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to arthritis including swelling, joint pain, back pain, inflammation in joints and muscle pain. ** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve pain due to inflammation caused by but not limited to the following: cramping and spasms, pulls and tears, stress and strains.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms of mold toxicity and illness including coughing, wheezing, burning in throat, headache, fatigue, and joint pain.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve pain due to inflammation caused by but not limited to the following: itching and sensitivity, eruptions, blisters.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: Temporarily relieves symptoms associated with viral infections; fever, chills, rash, achiness, cough, shortness of breath, chest pain, and fatigue.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to Candida albicans infection such as nausea, drowsiness, lethargy, confusion, vaginal discharge, sensitivities to foods and mucous congestion.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of pain in the scrotum, testicles tender and swollen.