Drugs Similar to QUELICIN
SUCCINYLCHOLINE CHLORIDE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 ·2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[ N , N , N -trimethyl]-, dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, crystalline powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) multi-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 22 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben, NF and 0.2 mg of propylparaben, NF as preservatives, 4.7 mg of sodium chloride, USP as iso-osmotic agent, and sodium hydroxide, NF and hydrochloric acid, NF as pH adjusters in water for injection, USP. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structural formula
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of succinylcholine chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant. See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular or intravenous use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives (List No. 6629). Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. 1
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular (IM) or intravenous (IV) use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odourless, crystalline powder, freely soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives (List No. 6629). Solution intended for single-dose administration contains no preservatives. Unused solution should be discarded. Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. succholinechlorideinjstructure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 22 mg of succinylcholine chloride dihydrate), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.7 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in Water for Injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Structural Formula
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant, see HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular or intravenous use. Succinylcholine Chloride is chemically designated as Ethanaminium, 2,2’-[(1,4-dioxo-1,4-butanediyl) bis(oxy)] bis [N, N, N-trimethyl-, dichloride, dihydrate, its molecular formula is C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. Succinylcholine chloride, USP is a white, odorless, crystalline powder. It is freely soluble in water, slightly soluble in alcohol and practically insoluble in ether. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains methylparaben, 0.18% and propylparaben, 0.02% as preservatives. Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED section for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. 1
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[N,N,N-trimethyl-ethanaminium]dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odorless, crystalline powder, freely soluble in water. It has the following structural formula: Succinylcholine Chloride Injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). succstr
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34 g/mol. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl) bis (oxy)] bis [N, N, N-trimethyl-], dichloride, dihydrate. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. Succinylcholine chloride, USP is a white, odorless, crystalline powder. It is freely soluble in water, slightly soluble in alcohol and practically insoluble in ether. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride ,USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.60 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). jh
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structural formula
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short- acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated as Ethanaminium, 2,2’-[(1,4-dioxo-1,4- butanediyl) bis(oxy)]bis[N, N, N-trimethyl-, dichloride, dihydrate, it’s molecular formula is C 14 H 30 Cl 2 N 2 O 4 •2H 2 O and its molecular weight is 397.34. It has the following structural formula Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Succinylcholine Chloride Injection, USP 100 mg/5 mL (20 mg/mL) is intended for single-dose administration and contains no preservatives. Unused solution should be discarded. Product not requiring dilution (single-dose prefilled syringe) contains sodium chloride to render isotonic. Each milliliter contains 20 mg succinylcholine chloride USP (in anhydrous form) equivalent to 21.99 mg succinylcholine chloride USP (in dihydrate form) and 4.5 mg of sodium chloride as an isotonicity agent. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH of the solution is 3.6 (3.0 to 4.5). Fig 3
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of succinylcholine chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)] bis[N,N,N-trimethyl-ethanaminium], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, crystalline powder, odorless, very soluble in water. It has the following structural formula: Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22mg of succinylcholine chloride dihydrate), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.7 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). succinylcholine-stru.jpg
SUCCINYLCHOLINE CHLORIDE INJECTION, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. SUCCINYLCHOLINE CHLORIDE INJECTION, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31 g/mol. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl) bis (oxy)] bis [N, N, N-trimethyl-], dichloride, dihydrate. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: SUCCINYLCHOLINE CHLORIDE INJECTION, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of SUCCINYLCHOLINE CHLORIDE INJECTION, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.65 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Succinylcholine-Chloride-SPL-Structure
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of succinylcholine chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 ·2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[ N , N , N -trimethyl]-, dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, crystalline powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) multi-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 22 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben, NF and 0.2 mg of propylparaben, NF as preservatives, 4.7 mg of sodium chloride, USP as iso-osmotic agent, and sodium hydroxide, NF and hydrochloric acid, NF as pH adjusters in water for injection, USP. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structural formula
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular (IM) or intravenous (IV) use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution is intended for multiple-dose administration and contains 0.18% Methylparaben and 0.02% Propylparaben as preservatives, contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. str
By Substance
Drugs sharing the same substance name
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
ANECTINE (Succinylcholine Chloride Injection, USP) is a short-acting depolarizing neuromuscular blocker, for intravenous (IV) or intramuscular administration. Anectine contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically assigned as C 14 H 30 Cl 2 N 2 O 4 with a molecular weight of 361.305 g/mol. Succinylcholine chloride is a white, odorless, slightly bitter powder and very soluble in water. The drug is unstable in alkaline solutions but relatively stable in acid solutions, depending upon the concentration of the solution and the storage temperature. Solutions of succinylcholine chloride should be stored under refrigeration to preserve potency. ANECTINE injection is a sterile nonpyrogenic solution for intravenous injection where each mL contains 20 mg succinylcholine chloride as active, 1 mg methylparaben as a preservative, 4.5 mg sodium chloride as an isotonic agent and pH adjusted to 3.5 with hydrochloric acid and sodium hydroxide. The chemical name for succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)] bis[N,N,N- trimethylethanaminium] dichloride, and the structural formula is: chemical-structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant. See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular or intravenous use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odorless, crystalline powder, freely soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives. Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 C l2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride, USP is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride, USP is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, or almost white odorless, crystalline powder, freely soluble in water. The drug is incompatible with alkaline solutions but relatively stablein acid solutions. Solutions of the drug lose potency unless refrigerated. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of succinylcholine chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.65 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.).
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 22 mg of succinylcholine chloride dihydrate), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.7 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in Water for Injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Structural Formula
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Succinylcholine-Chloride-SPL-Structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14H 30Cl 2N 2O 4.2H 2O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[N,N,N-trimethyl-ethanaminium],dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odourless, crystalline powder, freely soluble in water. It has the following structural formula: Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 21.994 mg of succinylcholine chloride dihydrate), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Formula1.jpg
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short- acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated as Ethanaminium, 2,2’-[(1,4-dioxo-1,4- butanediyl) bis(oxy)]bis[N, N, N-trimethyl-, dichloride, dihydrate, it’s molecular formula is C 14 H 30 Cl 2 N 2 O 4 •2H 2 O and its molecular weight is 397.34. It has the following structural formula Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Succinylcholine Chloride Injection, USP 100 mg/5 mL (20 mg/mL) is intended for single-dose administration and contains no preservatives. Unused solution should be discarded. Product not requiring dilution (single-dose prefilled syringe) contains sodium chloride to render isotonic. Each milliliter contains 20 mg succinylcholine chloride USP (in anhydrous form) equivalent to 21.99 mg succinylcholine chloride USP (in dihydrate form) and 4.5 mg of sodium chloride as an isotonicity agent. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH of the solution is 3.6 (3.0 to 4.5). Fig 3
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). str
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). str
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular (IM) or intravenous (IV) use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odourless, crystalline powder, freely soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives (List No. 6629). Solution intended for single-dose administration contains no preservatives. Unused solution should be discarded. Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. succholinechlorideinjstructure
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4. 2H 2 O and its molecular weight is 397.34 g/mol. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride, dihydrate. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of succinylcholine chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.60 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). Image
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34. The chemical name of succinylcholine chloride, USP is 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-ethanaminium]dichloride. Succinylcholine chloride, USP is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of succinylcholine chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.6 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). chemical-structure
Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine anhydrous (equivalent to 22.65 mg of succinylcholine chloride, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.70 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant. See HOW SUPPLIED for summary of content and characteristics of the solutions. The solutions are for intramuscular or intravenous use. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives (List No. 6629). Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. 1
Summary not available yet.
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as an ultra short-acting, depolarizing, skeletal muscle relaxant. See How Supplied for summary of content and characteristics of the solutions. The solutions are for intramuscular or intravenous use. Succinylcholine Chloride, USP is chemically designated C14H30Cl2N2O4.2H2O and its molecular weight is 397.34. It has the following structural formula: Succinylcholine is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white or almost white, odorless, crystalline powder, freely soluble in water. The drug is incompatible with alkaline solutions but relatively stable in acid solutions. Solutions of the drug lose potency unless refrigerated. Solution intended for multiple-dose administration contains 0.18% methylparaben and 0.02% propylparaben as preservatives. Product not requiring dilution (multiple-dose fliptop vial) contains sodium chloride to render isotonic. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH is 3.6 (3.0 to 4.5). See table in HOW SUPPLIED for characteristics. Sodium Chloride, USP, chemically designated NaCl, is a white crystalline compound freely soluble in water. Structure
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 .2H 2 O and its molecular weight is 397.34 g/mol. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl) bis (oxy)] bis [N, N, N-trimethyl-], dichloride, dihydrate. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. Succinylcholine chloride, USP is a white, odorless, crystalline powder. It is freely soluble in water, slightly soluble in alcohol and practically insoluble in ether. It has the following structural formula: Succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride ,USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.60 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). jh
Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C 14 H 30 Cl 2 N 2 O 4 and its molecular weight is 361.31. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-], dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula: Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of Succinylcholine Chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.8 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.). structural formula