Drugs Similar to FLUORESCITE

INDICATIONS: Intended for use when fitting contact lenses. DIRECTIONS FOR USE: To insure full fluorescence and patient comfort, the impregnated tip should be moistened before application. One or two drops of sterile irrigating or saline solution should be used for this purpose. Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application. Grasp tabs between thumbs & index fingers Gently pull tabs apart Remove strip taking care to touch only the white portion of the strip 83851-100: Vista Fluroescein Sodium

INDICATIONS For testing tear film stability by determining the fluorescein break-up time (FBUT).

INDICATIONS For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.

INDICATIONS For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.

AK-FLUOR ® (fluorescein injection, USP) is a sterile solution for use intravenously as a diagnostic aid. It is a dark reddish orange solution with a pH of 8.3 to 9.8 and an osmolality of 572 to 858 mOsm/kg. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'- dihydroxy, disodium salt.: The active ingredient is represented by the chemical structure: MW = 376.27 AK-FLUOR® 10% contains: Active: fluorescein sodium (10 % w/v, 100 mg/mL) Inactives: Sodium Hydroxide and/or Hydrochloric Acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. Chemical Structure

Altafluor Benox (fluorescein sodium and benoxinate hydrochloride ophthalmic solution) 0.25%/0.4% is a sterile disclosing agent in combination with a short-acting ester anesthetic for topical ophthalmic use. Fluorescein sodium is represented by the following structural formula: C 20 H 10 Na 2 O 5 Mol. Wt. 376.27 Chemical Name: Spiro [isobenzofuran-1 (3 H ),9’-9[9 H ] xanthene]-3-one, 3’,6’ dihydroxy, disodium salt. Benoxinate hydrochloride is represented by the following structural formula: C 17 H 28 N 2 O 3 • HCl Mol. Wt. 344.88 Chemical Name: 2-(Diethylamino) etyl 4-amino-3-butoxybenzoate monohydrochloride. Each mL contains: Actives: fluorescein sodium 2.5 mg (0.25%) equivalent to fluorescein 2.2 mg (0.22%), benoxinate hydrochloride 4 mg (0.4%) equivalent to benoxinate 3.6 mg (0.36%); Inactives: povidone, hydrochloric acid, boric acid, sodium hydroxide, water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH (4.3 – 5.3). Preservative: chlorobutanol 11mg (1.1%). Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution USP, 0.25%/0.4% is a disclosing agent with rapid anesthetic action of short duration. Fluorescein Sodium is represented by the following structural formula. Benoxinate Hydrochloride is represented by the following structural formula:

INDICATIONS: Intended for use when fitting contact lenses. DIRECTIONS FOR USE: To insure full fluorescence and patient comfort, the impregnated tip should be moistened before application. One or two drops of sterile irrigating or saline solution should be used for this purpose. Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application. Grasp tabs between thumbs & index fingers Gently pull tabs apart Remove strip taking care to touch only the white portion of the strip 83851-100: Vista Fluroescein Sodium

INDICATIONS For testing tear film stability by determining the fluorescein break-up time (FBUT).

AK-FLUOR® (fluorescein injection, USP) is a sterile solution for use intravenously as a diagnostic aid. It is a dark reddish orange solution with a pH of 8.3 to 9.8 and an osmolality of 572 to 858 mOsm/kg for the 10% and 1800 to 2200 mOsm/kg for the 25%. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'-dihydroxy, disodium salt. The active ingredient is represented by the chemical structure: MW = 376.27 AK-FLUOR® 10% contains: Active: fluorescein sodium (equivalent to fluorescein 10 % w/v, 100 mg/mL) Inactives: Sodium Hydroxide and/or Hydrochloric Acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. AK-FLUOR® 25% contains: Active: fluorescein sodium (equivalent to fluorescein 25% w/v, 250 mg/mL) Inactives: Sodium Hydroxide and/or Hydrochloric Acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. STRUCTURE

Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution, 0.3%/0.4% is a sterile solution containing a disclosing agent in combination with a short-acting ester anesthetic for topical ophthalmic use. Fluorescein sodium is represented by the following structural formula: Chemical Name: 3’,6’ Dihydroxy-3H-spiro[isobenzofuran-1,9-xanthen]-3-one disodium salt. Benoxinate hydrochloride is represented by the following structural formula: Chemical Name: 2-(Diethylamino) ethyl 4-amino-3-butoxybenzoate hydrochloride. Each mL of Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution 0.3%/0.4% contains: • Active ingredients : fluorescein sodium 2.6 mg (0.3%) equivalent to fluorescein 2.3 mg (0.2%), benoxinate hydrochloride 4.4 mg (0.4%) equivalent to benoxinate 3.9 mg (0.4%) • Preservative : chlorobutanol 12.6 mg (1.3%) • Inactive ingredients : povidone, hydrochloric acid, boric acid, water for injection. Hydrochloric acid may be added to adjust pH (4.3 – 5.3) chem chem2

Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution, 0.3%/0.4% is a sterile solution containing a disclosing agent in combination with a short-acting ester anesthetic for topical ophthalmic use. Fluorescein sodium is represented by the following structural formula: Chemical Name: 3’,6’ Dihydroxy-3H-spiro[isobenzofuran-1,9-xanthen]-3-one disodium salt. Benoxinate hydrochloride is represented by the following structural formula: Chemical Name: 2-(Diethylamino) ethyl 4-amino-3-butoxybenzoate hydrochloride. Each mL of Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution 0.3%/0.4% contains: Active ingredients: fluorescein sodium 2.6 mg (0.3%) equivalent to fluorescein 2.3 mg (0.2%), benoxinate hydrochloride 4.4 mg (0.4%) equivalent to benoxinate 3.9 mg (0.4%) Preservative: chlorobutanol 12.6 mg (1.3%) Inactive ingredients: povidone, hydrochloric acid, boric acid, water for injection. Hydrochloric acid may be added to adjust pH (4.3 – 5.3). ChemFluorescein ChemBenoxinate

Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution, 0.3%/0.4% is a sterile solution containing a disclosing agent in combination with a short-acting ester anesthetic for topical ophthalmic use. Fluorescein sodium is represented by the following structural formula: Chemical Name: 3’,6’ Dihydroxy-3H-spiro[isobenzofuran-1,9-xanthen]-3-one disodium salt. Benoxinate hydrochloride is represented by the following structural formula: Chemical Name: 2-(Diethylamino) ethyl 4-amino-3-butoxybenzoate hydrochloride. Each mL of Fluorescein Sodium and Benoxinate Hydrochloride Ophthalmic Solution 0.3%/0.4% contains: Active ingredients: fluorescein sodium 2.6 mg (0.3%) equivalent to fluorescein 2.3 mg (0.2%), benoxinate hydrochloride 4.4 mg (0.4%) equivalent to benoxinate 3.9 mg (0.4%) Preservative: chlorobutanol 12.6 mg (1.3%) Inactive ingredients: povidone, hydrochloric acid, boric acid, water for injection. Hydrochloric acid may be added to adjust pH (4.3 – 5.3). ChemFluorescein ChemBenoxinate

Fluorescein Sodium and Proparacaine Hydrochloride Ophthalmic Solution, USP (Sterile) is a sterile ophthalmic solution combining the disclosing action of Fluorescein with the anesthetic action of Proparacaine Hydrochloride. The active ingredient, Fluorescein Sodium , has the chemical name Spiro [isobenzofuran-1 (3H), 9'-[9H]xanthene]-3-one, 3' ,6' dihydroxy-,disodium salt. It is represented by the following structural formula: The active ingredient, Proparacaine Hydrochloride , has the chemical name Benzoic acid, 3-amino-4-propoxy-, 2-[diethylamino]ethyl ester monohydrochloride. It is represented by the following structural formula: EACH mL CONTAINS : ACTIVES: Fluorescein Sodium, USP, 0.25% [2.5 mg]. Proparacaine Hydrochloride, USP, 0.5% [5mg]; INACTIVES: Povidone, Boric Acid, Water for Injection, Sodium Hydroxide, or/and Hydrochloric Acid may be added to adjust pH. PRESERVATIVE: Methylparaben 0.1%. structural formula structural formula

INDICATIONS For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.

INDICATIONS For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.