Drugs Similar to GLUCAGON 1555

BAQSIMI contains glucagon, an antihypoglycemic agent used to treat severe hypoglycemia. Glucagon is a single-chain polypeptide containing 29 amino acid residues and has a molecular weight of 3483, and is identical to human glucagon. Its molecular formula is C 153 H 225 N 43 O 49 S, with the following molecular structure: BAQSIMI is a preservative-free, white powder for intranasal administration in an intranasal device containing one dose of 3 mg glucagon. BAQSIMI contains glucagon as the active ingredient and betadex, and dodecylphosphocholine as the excipients. structure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is produced by solid state peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3482.8 Daltons. The empirical formula is C 153 H 225 N 43 O 49 S. The primary sequence of glucagon is shown below. Glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile, white to off white lyophilized powder or plug in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon USP, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1 mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2. Structure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3482.68 g/mol. The empirical formula is C 153 H 225 N 43 O 49 S. The primary sequence of glucagon is shown below. Glucagon is a white powder. It is very slightly soluble in water. Glucagon for injection, USP is a sterile white lyophilized cake or powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 3.0 to 3.2. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and water for injection, at pH 1.8 to 2.2. Image

Glucagon for Injection (synthetic origin) is a polypeptide hormone identical to human glucagon that increases blood glucose and relaxes smooth muscle of the gastrointestinal tract. Glucagon is produced by solid state peptide synthesis and is highly purified. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483. The empirical formula is C 153 H 225 SN 43 O 49 S. The primary sequence of glucagon is shown below. Crystalline glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon is available for use intravenously, intramuscularly, or subcutaneously in a kit that contains a vial of sterile glucagon and a syringe of sterile diluent. The vial contains 1 mg of glucagon and 49 mg of lactose. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon. One International Unit of glucagon is equivalent to 1 mg of glucagon.1 The diluent syringe contains 12 mg/mL of glycerin, Water For Injection, and hydrochloric acid. Sequence

Glucagon for Injection (synthetic origin) is a polypeptide hormone identical to human glucagon that increases blood glucose and relaxes smooth muscle of the gastrointestinal tract. Glucagon is produced by solid state peptide synthesis and is highly purified. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483. The empirical formula is C 153 H 225 SN 43 O 49 S. The primary sequence of glucagon is shown below. Crystalline glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon is available for use intravenously, intramuscularly, or subcutaneously in a kit that contains a vial of sterile glucagon and a syringe of sterile diluent. The vial contains 1 mg of glucagon and 49 mg of lactose. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon. One International Unit of glucagon is equivalent to 1 mg of glucagon.1 The diluent syringe contains 12 mg/mL of glycerin, Water For Injection, and hydrochloric acid. Sequence

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. It is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The structure of glucagon is: Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial for subcutaneous, intramuscular or intravenous use. The reconstituted solution contains glucagon as hydrochloride 1 mg per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water. DESCRIPTION

Glucagon for Injection, for intravenous or intramuscular use, is a gastrointestinal motility inhibitor that is produced by solid phase peptide synthesis. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The chemical structure of the glucagon polypeptide is identical to human glucagon and to glucagon extracted from beef and pork pancreas. The structure of glucagon is: C 153 H 225 N 43 O 49 S Molecular Weight = 3483 Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial. The reconstituted solution contains 1 mg of glucagon as hydrochloride per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water. structure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. It is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The structure of glucagon is: Molecular Formula = C 153 H 225 N 43 O 49 S Molecular Weight = 3483 Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial for subcutaneous, intramuscular or intravenous use. The reconstituted solution contains glucagon as hydrochloride 1 mg per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water. Figure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. It is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The structure of glucagon is: Molecular Formula = C 153 H 225 N 43 O 49 S Molecular Weight = 3483 Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial for subcutaneous, intramuscular or intravenous use. The reconstituted solution contains glucagon as hydrochloride 1 mg per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water. Figure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C 153 H 225 N 43 O 49 S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2. emperical-formula

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is produced by solid state peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3482.8 Daltons. The empirical formula is C 153 H 225 N 43 O 49 S. The primary sequence of glucagon is shown below. Glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile, white to off white lyophilized powder or plug in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon USP, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1 mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2. Glucagon Primary Sequence

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is a single chain containing 29 amino acid residues and has a molecular weight of 3483 and is identical to human glucagon. Glucagon is of synthetic origin produced by solid phase synthesis. Its molecular formula is C 153 H 225 N 43 O 49 S with the following structure: GVOKE HypoPen, GVOKE PFS, and GVOKE Kit GVOKE HypoPen (glucagon) injection, GVOKE PFS (glucagon) injection, and GVOKE Kit (glucagon) injection (these three presentations are also referred to as GVOKE (glucagon) injection in this labeling) are clear, colorless to pale yellow, sterile solutions for subcutaneous injection. GVOKE HypoPen and GVOKE PFS: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, and 1.2 mg of 1N sulfuric acid in 209 mg dimethyl sulfoxide diluent. GVOKE HypoPen: Each 0.1 mL contains 0.5 mg of glucagon, 5.6 mg of trehalose dihydrate NF, and 0.6 mg of 1N sulfuric acid in 104 mg dimethyl sulfoxide diluent. GVOKE Kit: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent. GVOKE VialDx GVOKE VialDx (glucagon) injection is a clear, colorless to pale yellow, sterile solution for intravenous injection available in 1 mg per 0.2 mL vial. Each 0.2 mL of GVOKE VialDx contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent prior to dilution with 0.9% Sodium Chloride [for dilution instructions, see Dosage and Administration ( 2.2) ] . The diluted solution contains 0.45 mg per mL glucagon, 5 mg per mL trehalose dihydrate, 93.2 mg per mL dimethyl sulfoxide, 2.6 mg per mL mannitol, and 0.60 mg per mL 1 N sulfuric acid. Its molecular formula is C153H225N43O49S with the following structure:

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is a single chain containing 29 amino acid residues and has a molecular weight of 3483 and is identical to human glucagon. Glucagon is of synthetic origin produced by solid phase synthesis. Its molecular formula is C 153 H 225 N 43 O 49 S with the following structure: GVOKE HypoPen, GVOKE PFS, and GVOKE Kit GVOKE HypoPen (glucagon) injection, GVOKE PFS (glucagon) injection, and GVOKE Kit (glucagon) injection (these three presentations are also referred to as GVOKE (glucagon) injection in this labeling) are clear, colorless to pale yellow, sterile solutions for subcutaneous injection. GVOKE HypoPen and GVOKE PFS: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, and 1.2 mg of 1N sulfuric acid in 209 mg dimethyl sulfoxide diluent. GVOKE HypoPen: Each 0.1 mL contains 0.5 mg of glucagon, 5.6 mg of trehalose dihydrate NF, and 0.6 mg of 1N sulfuric acid in 104 mg dimethyl sulfoxide diluent. GVOKE Kit: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent. GVOKE VialDx GVOKE VialDx (glucagon) injection is a clear, colorless to pale yellow, sterile solution for intravenous injection available in 1 mg per 0.2 mL vial. Each 0.2 mL of GVOKE VialDx contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent prior to dilution with 0.9% Sodium Chloride [for dilution instructions, see Dosage and Administration ( 2.2) ] . The diluted solution contains 0.45 mg per mL glucagon, 5 mg per mL trehalose dihydrate, 93.2 mg per mL dimethyl sulfoxide, 2.6 mg per mL mannitol, and 0.60 mg per mL 1 N sulfuric acid. Its molecular formula is C153H225N43O49S with the following structure:

BAQSIMI contains glucagon, an antihypoglycemic agent used to treat severe hypoglycemia. Glucagon is a single-chain polypeptide containing 29 amino acid residues and has a molecular weight of 3483, and is identical to human glucagon. Its molecular formula is C 153 H 225 N 43 O 49 S, with the following molecular structure: BAQSIMI is a preservative-free, white powder for intranasal administration in an intranasal device containing one dose of 3 mg glucagon. BAQSIMI contains glucagon as the active ingredient and betadex, and dodecylphosphocholine as the excipients. structure

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is a single chain containing 29 amino acid residues and has a molecular weight of 3483 and is identical to human glucagon. Glucagon is of synthetic origin produced by solid phase synthesis. Its molecular formula is C 153 H 225 N 43 O 49 S with the following structure: GVOKE HypoPen, GVOKE PFS, and GVOKE Kit GVOKE HypoPen (glucagon) injection, GVOKE PFS (glucagon) injection, and GVOKE Kit (glucagon) injection (these three presentations are also referred to as GVOKE (glucagon) injection in this labeling) are clear, colorless to pale yellow, sterile solutions for subcutaneous injection. GVOKE HypoPen and GVOKE PFS: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, and 1.2 mg of 1N sulfuric acid in 209 mg dimethyl sulfoxide diluent. GVOKE HypoPen: Each 0.1 mL contains 0.5 mg of glucagon, 5.6 mg of trehalose dihydrate NF, and 0.6 mg of 1N sulfuric acid in 104 mg dimethyl sulfoxide diluent. GVOKE Kit: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent. GVOKE VialDx GVOKE VialDx (glucagon) injection is a clear, colorless to pale yellow, sterile solution for intravenous injection available in 1 mg per 0.2 mL vial. Each 0.2 mL of GVOKE VialDx contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent prior to dilution with 0.9% Sodium Chloride [for dilution instructions, see Dosage and Administration ( 2.2) ] . The diluted solution contains 0.45 mg per mL glucagon, 5 mg per mL trehalose dihydrate, 93.2 mg per mL dimethyl sulfoxide, 2.6 mg per mL mannitol, and 0.60 mg per mL 1 N sulfuric acid. Its molecular formula is C153H225N43O49S with the following structure:

Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is a single chain containing 29 amino acid residues and has a molecular weight of 3483 and is identical to human glucagon. Glucagon is of synthetic origin produced by solid phase synthesis. Its molecular formula is C 153 H 225 N 43 O 49 S with the following structure: GVOKE HypoPen, GVOKE PFS, and GVOKE Kit GVOKE HypoPen (glucagon) injection, GVOKE PFS (glucagon) injection, and GVOKE Kit (glucagon) injection (these three presentations are also referred to as GVOKE (glucagon) injection in this labeling) are clear, colorless to pale yellow, sterile solutions for subcutaneous injection. GVOKE HypoPen and GVOKE PFS: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, and 1.2 mg of 1N sulfuric acid in 209 mg dimethyl sulfoxide diluent. GVOKE HypoPen: Each 0.1 mL contains 0.5 mg of glucagon, 5.6 mg of trehalose dihydrate NF, and 0.6 mg of 1N sulfuric acid in 104 mg dimethyl sulfoxide diluent. GVOKE Kit: Each 0.2 mL contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent. GVOKE VialDx GVOKE VialDx (glucagon) injection is a clear, colorless to pale yellow, sterile solution for intravenous injection available in 1 mg per 0.2 mL vial. Each 0.2 mL of GVOKE VialDx contains 1 mg of glucagon, 11.1 mg of trehalose dihydrate NF, 5.8 mg of mannitol USP, and 1.32 mg of 1N sulfuric acid in 205 mg dimethyl sulfoxide diluent prior to dilution with 0.9% Sodium Chloride [for dilution instructions, see Dosage and Administration ( 2.2) ] . The diluted solution contains 0.45 mg per mL glucagon, 5 mg per mL trehalose dihydrate, 93.2 mg per mL dimethyl sulfoxide, 2.6 mg per mL mannitol, and 0.60 mg per mL 1 N sulfuric acid. Its molecular formula is C153H225N43O49S with the following structure:

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache and fatigue.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache, fatigue, and detoxification stress.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms related to trauma associated with a dental procedure including inflammation, swelling and pain.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to lymphatic and spleen malfunction including lack of energy, lethargy, weakness and poor muscle tone, poor appetite and sense of taste, poor digestion, loose and watery stools, and poor concentration.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms related to poor circulation, and low energy.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms related to H. Pylori infection including upper abdominal pain or discomfort, loss of appetite, belching, nausea, vomiting and fatigue.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS Temporarily relieves feeling ungrounded or lost, selfishness, or difficulty in moving past earlier emotional upset or suppressed feelings.*

Uses Temporary relief of occasional numbness, irritability, tingling.

HOMEOPATHIC INDICATIONS: For the temporarily relief of symptoms related to Lyme disease or other co-infections including joint pain, severe headaches, fever, severe muscle aches/pain, flu-like feelings of headache, stiff neck, muscle aches, and change in smell/taste, difficulty chewing, swallowing or speaking, hoarseness of vocal cord problems.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: Helps to hydrate throat in an aid to reduce food obstruction when used daily.

INDICATIONS Temporarily relieves sadness, grief, worry, stress, or agitation.*

INDICATIONS For the temporary relief of itchy or watery eyes, sneezing, sinus congestion, or occasional headache due to sensitivity to phenolic compounds found in foods or other products.*

Use: This product is a Homeopathic Dilution formulated to support the body's immunity for the temporary relief of allergies.

Uses For temporary relief of symptoms: itchy, watery eyes, sore throat, cough, runny nose, sneezing, congestion, headaches, hoarseness. Reference image: Southern.jpg

USES This Homeopathic product of natural source helps relieve fatigue, lethargy, insomnia, irritability and loss of concentration associated with jet lag.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to candida albicans infection including nausea, drowsiness, lethargy, confusion, vaginal discharge, food or fungi sensitivities, petrochemicals, mucous congestion and tinnitus.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

Uses Temporary relief of abdominal discomfort, flatulence, diarrhea, constipation.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to heartburn and esophageal reflux.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of exhaustion, vomiting, prostration, and metallic taste.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to upper respiratory infections including fever, cough and runny nose.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.

Uses Temporarily relieves symptoms contributing to: excessive appetite Constitutional tendency to gain fat Cravings for sweets and starches Water retention Overeating Ravenous hunger Excess weight Abdominal fat As per various homeopathic materia medicas. Claims based on traditional homeopathic practice, not accepted medical evidence. These uses have not been evaluated by the FDA, and product has not been clinically tested. Reference image:Appetite and Weight.jpg

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to various forms of Candida spp. overgrowth such as nausea, drowsiness, lethargy, confusion, vaginal discharge, sensitivities to foods and mucous congestion.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.