Drugs Similar to OXYCODONE HYDROCHLORIDE

Oxycodone Hydrochloride Tablets USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 15 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, stearic acid, D&C Yellow No. 10 (15 mg tablet), and FD&C Blue No. 2 (15 mg and 30 mg tablets). The 5 mg, 15 mg and 30 mg tablets contain the equivalent of 4.5 mg, 13.5 mg and 27.0 mg, respectively, of oxycodone free base. Chemical Formula

Oxycodone hydrochloride oral solution is an opioid agonist, available as solution in 5 mg/5mL (1 mg/mL) strength for oral administration. Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6one hydrochloride and has the following structural formula: C 18 H 21 NO 4 •HCl MW 351.82 Oxycodone hydrochloride, USP is a white to off-white fine crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Oxycodone hydrochloride oral solution USP, 5 mg per 5 mL contains equivalent of 4.5 mg of oxycodone free base per 5 mL and contains the following inactive ingredients: sorbitol solution, saccharin sodium, anhydrous citric acid, sodium citrate dihydrate, sodium benzoate, FD&C red #40, mixed berry flavor, and purified water. oxycodone-struct

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base. Chemical Structure

Oxycodone hydrochloride tablets USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula: The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the following inactive ingredients: lactose monohydrate; sodium starch glycolate; microcrystalline cellulose; colloidal silicon dioxide; magnesium stearate; FD&C Red no. 40 powder (10 mg only) and D&C Yellow No. 10 (15 mg, 20 mg and 30 mg only). The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.5 mg, 9.0 mg, 13.5 mg, 18.0 mg and 27.0 mg respectively, of oxycodone free base. structural formula

Oxycodone Hydrochloride is a white odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. Chemically, oxycodone hydrochloride (5R,9R,13S,14S)-4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4.HCl, and it has the following chemical Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/ mL): Each 1 mL of oral yellow solution contains 20 mg of oxycodone hydrochloride, USP and the following inactive ingredients: citric acid anhydrous, D&C Yellow #10, natural/artificial mixed berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbital solution. structure

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone hydrochloride tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Oxycodone hydrochloride tablets, USP contains inactive ingredients: corn starch; lactose monohydrate; microcrystalline cellulose; silicon dioxide; sodium starch glycolate; and stearic acid. The 10 mg tablet also contains D&C Red No. 27 aluminum lake. The 15 mg tablet also contains D&C Yellow No. 10 aluminum lake and FD&C Blue No. 2 aluminum lake. The 20 mg tablet also contains FD&C Blue No. 2 aluminum lake; FD&C Red No. 40 aluminum lake; and FD&C Yellow No. 6 aluminum lake. The 30 mg tablet also contains FD&C Blue No. 2 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg 18 mg and 27 mg, respectively, of oxycodone free base. Chemical Structure

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone hydrochloride tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Oxycodone hydrochloride tablets, USP contains inactive ingredients: corn starch; lactose monohydrate; microcrystalline cellulose; silicon dioxide; sodium starch glycolate; and stearic acid. The 10 mg tablet also contains D&C Red No. 27 aluminum lake. The 15 mg tablet also contains D&C Yellow No. 10 aluminum lake and FD&C Blue No. 2 aluminum lake. The 20 mg tablet also contains FD&C Blue No. 2 aluminum lake; FD&C Red No. 40 aluminum lake; and FD&C Yellow No. 6 aluminum lake. The 30 mg tablet also contains FD&C Blue No. 2 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg 18 mg and 27 mg, respectively, of oxycodone free base.

Oxycodone Hydrochloride Oral Solution is an agonist, available as a clear red solution 5 mg/5 mL (1 mg/mL) and a clear yellow solution 100 mg/5 mL (20 mg/mL) for oral administration. The chemical name is (5R,9R,13S,14S)-4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C 18 H 21 NO 4 •HCl, and it has the following chemical structure: Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution, 5 mg per 5 mL (1 mg/mL) include: sodium benzoate, citric acid anhydrous, sodium saccharin, sorbitol solution 70%, artificial raspberry flavor (#498729), FD&C Red 40, and purified water. The inactive ingredients in Oxycodone Hydrochloride Oral Solution, 100 mg per 5 mL (20 mg/mL) include: sodium benzoate, citric acid anhydrous, sodium saccharin, sorbitol solution 70%, artificial raspberry flavor (#498729), D&C Yellow Dye #10, and purified water. Chemical Structure

Oxycodone hydrochloride tablets USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 15 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula: The 15 mg and 30 mg tablets contain the following inactive ingredients: magnesium stearate; microcrystalline cellulose; sodium starch glycolate; colloidal silicon dioxide; lactose; D&C Yellow No. 10. The 15 mg and 30 mg tablets contain the equivalent of 13.5 mg and 27.0 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone Hydrochloride Oral Solution is an agonist, available as a yellow solution 100 mg/5 mL (20 mg/mL) for oral administration. The chemical name is (5R,9R,13S,14S)-4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C 18 H 21 NO 4 HCl, and it has the following chemical structure. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) include: artificial raspberry flavor, citric acid, D&C Yellow #10, purified water, saccharin sodium, sodium benzoate, sodium citrate and sorbitol. Chemical Structure

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone hydrochloride tablets USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 15 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula: The 15 mg and 30 mg tablets contain the following inactive ingredients: magnesium stearate; microcrystalline cellulose; sodium starch glycolate; colloidal silicon dioxide; lactose; D&C Yellow No. 10. The 15 mg and 30 mg tablets contain the equivalent of 13.5 mg and 27.0 mg, respectively, of oxycodone free base.

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone Hydrochloride Oral Solution USP is an opioid agonist, available as a solution in a 5 mg/5 mL (1 mg/mL) strength for oral administration. Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Oxycodone Hydrochloride Oral Solution USP, 5 mg per 5 mL contains the equivalent of 4.5 mg of oxycodone free base per 5 mL's and contains the following inactive ingredients: Poloxamer 188 NF, Sodium Benzoate NF, Citric Acid Anhydrous USP, Glycerin USP, Sorbitol Solution 70% USP, FD&C Red #40, Artificial Black Currant Flavor and Water.

Oxycodone hydrochloride tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Oxycodone hydrochloride tablets, USP contains inactive ingredients: corn starch; lactose monohydrate; microcrystalline cellulose; silicon dioxide; sodium starch glycolate; and magnesium stearate. The 10 mg tablet also contains D&C Red No. 27 aluminum lake. The 15 mg tablet also contains D&C Yellow No. 10 aluminum lake and FD&C Blue No. 2 aluminum lake. The 20 mg tablet also contains FD&C Blue No. 2 aluminum lake; FD&C Red No. 40 aluminum lake; and FD&C Yellow No. 6 aluminum lake. The 30 mg tablet also contains FD&C Blue No. 2 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg 18 mg and 27 mg, respectively, of oxycodone free base. Chemical Structure

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base. formula

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base. formula

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

Oxycodone HCl tablets, USP contains oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg or 30 mg, of oxycodone hydrochloride, USP. Oxycodone hydrochloride, USP is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride, USP dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride, USP is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid. The 10 mg tablet also contains D&C Red No. 27. The 15 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 20 mg tablet also contains the following inactive ingredients: FD&C Blue No. 2, FD&C Red No. 40 and FD&C Yellow No. 6. The 30 mg tablet also contains the following inactive ingredients: D&C Yellow No. 10 and FD&C Blue No. 2. The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.6 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.

XTAMPZA ER (oxycodone) extended-release capsules are an opioid agonist for oral use. The capsules contain microspheres formulated with oxycodone base and are supplied in strengths of 9 mg (equivalent to 10 mg oxycodone HCl), 13.5 mg (equivalent to 15 mg oxycodone HCl), 18 mg (equivalent to 20 mg oxycodone HCl), 27 mg (equivalent to 30 mg oxycodone HCl), and 36 mg (equivalent to 40 mg oxycodone HCl) capsules. The capsule strengths describe the amount of oxycodone base per capsule. The structural formula for oxycodone is as follows: C 18 H 21 NO 4 MW 315.37 g/mol The chemical name is 4,5 α-Epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one. Oxycodone base is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone is present as myristate salt in the XTAMPZA ER formulation. Each XTAMPZA ER capsule contains either 9, 13.5, 18, 27, or 36 mg of oxycodone (equivalent to 10, 15, 20, 30, or 40 mg of oxycodone HCl, respectively) and the following inactive ingredients: myristic acid, yellow beeswax, carnauba wax, stearoyl polyoxyl-32 glycerides, magnesium stearate, and colloidal silicon dioxide. The capsule shells collectively contain titanium dioxide, hypromellose, and water. Additionally, the 9 mg and 18 mg strength capsule shells contain yellow iron oxide, the 13.5 and 36 mg strength capsule shells contain red iron oxide, and the 27 mg strength capsule shells contain black iron oxide. Chemical Structure

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: Oxycodone Structural Formula Acetaminophen Structural Formula

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula:

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of ENDOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: Oxycodone Structural Formula Acetaminophen Structural Formula

Oxycodone hydrochloride and acetaminophen are available in tablets for oral administration. Each NALOCET ® (oxycodone and acetaminophen tablet) contains: Oxycodone Hydrochloride USP….. 2.5 mg* (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg Oxycodone) Acetaminophen USP……………… 300 mg Inactive Ingredients The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and FD&C Blue #1 Aluminum Lake. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 •HCl and the molecular weight is 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: oxycodone hydrochloride chemical structure acetaminophen chemical structure

OXAYDO (oxycodone HCl) 5 mg and 7.5 mg tablets are an immediate-release opioid agonist intended for oral administration only. Chemically, oxycodone HCl is 4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one HCl, a white, odorless crystalline powder. Oxycodone HCl is soluble in water (1 g in 6 to 7 mL). The molecular weight of oxycodone HCl is 351.82. The molecular formula for oxycodone HCl is C 18 H 21 NO 4 •HCl, and the structure is: The inactive ingredients in OXAYDO include: colloidal silicon dioxide NF; crospovidone NF; magnesium stearate NF; microcrystalline cellulose NF; polyethylene oxide NF; and sodium lauryl sulfate NF. The tablets are round, convex, white and debossed with the strength (5 or 7.5) on one side and the letter “O” on the other side. Oxado Chemical structure

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet, for oral administration contains: Oxycodone hydrochloride, USP………………………………………………….. 2.5 mg * ( * 2.5 mg oxycodone Hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP……………………………………………………………… 325 mg Oxycodone hydrochloride, USP …………………………………………………. 5 mg * ( * 5 mg oxycodone Hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP …………………………………………………………….. 325 mg Oxycodone hydrochloride, USP………………………………………………….. 7.5 mg * ( * 7.5 mg oxycodone Hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP……………………………………………………………… 325 mg Oxycodone hydrochloride, USP…………………………………………………… 10 mg * ( * 10 mg oxycodone Hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP ……………………………………………………………... 325 mg Inactive Ingredients The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 and the 5 mg/325 mg strength contains FD&C Blue No. 1. The 7.5 mg/325 mg strength contain FD&C Yellow No. 6. The 10 mg/325 mg strength contain D&C Yellow No. 10. Oxycodone and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 381.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: structure1 structure2

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride, USP.......................................... 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP...................................................... 325 mg Oxycodone Hydrochloride, USP........................................ 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP........................................ 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Inactive Ingredients All strengths of Oxycodone and Acetaminophen Tablets, USP contain the inactive ingredients crospovidone, lactose monohydrate, povidone, pregelatinized corn starch, and stearic acid. The 5 mg/325 mg tablets contain FD&C Blue No. 1 Aluminum Lake as a colorant. The 7.5 mg/325 mg tablets contain FD&C Yellow No. 6 Aluminum Lake as a colorant. The 10 mg/325 mg tablets contain D&C Yellow No. 10 Aluminum Lake as a colorant. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: Oxycodone Structural Formula APAP Structural Formula

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of oxycodone and acetaminophen tablets, USP also contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. In addition, the 5 mg/325 mg strength contains FD&C Blue No. 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. Oxycodone Hydrochloride and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 • HCl and the molecular weight 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone Hydrochloride and Acetaminophen Tablets, USP contain acetaminophen, 4’-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: USP Dissolution Test pending. image-01.jpg image-02.jpg

Oxycodone hydrochloride and acetaminophen are available in tablets for oral administration. Each Oxycodone and Acetaminophen Tablet, 2.5 mg/300 mg contains: Oxycodone Hydrochloride USP….. 2.5 mg* (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg Oxycodone) Acetaminophen USP……………… 300 mg Each Oxycodone and Acetaminophen Tablet, 5 mg/300 mg contains: Oxycodone Hydrochloride USP….. 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP……………… 300 mg Oxycodone Hydrochloride USP….. 7.5 mg* (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg Oxycodone) Acetaminophen USP……………… 300 mg Each Oxycodone and Acetaminophen Tablet, 10 mg/300 mg contains: Oxycodone Hydrochloride USP….. 10 mg* (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg Oxycodone) Acetaminophen USP……………… 300 mg Inactive Ingredients The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. In addition the 2.5 mg/300 mg strength contains FD&C Blue #1 Aluminum Lake, the 5 mg/300 mg strength contains D&C Yellow #10; the 7.5 mg/300 strength contains FD&C Red# 40 Aluminum Lake; the 10 mg/300 mg strength contains FD&C Yellow #6 Aluminum Lake. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 •HCl and the molecular weight is 351.82. It is derived from the opium alkaloid thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: oxycodone hydrochloride chemical structure acetaminophen chemical structure

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride USP……………. 5 mg* (*5 mg Oxycodone Hydrochloride, USP is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP………………………325 mg Inactive Ingredients The tablets contain colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 •HCl and the molecular weight 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, USP, 4’-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: b83c12c5-figure-01 b83c12c5-figure-02

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone hydrochloride, USP 5 mg (5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg (7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg (10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone) Acetaminophen, USP 325 mg Inactive Ingredients The tablets contain pregelatinized corn starch, crospovidone, povidone, magnesium stearate, colloidal silicon dioxide, and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxy-dihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets, USP, contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: Chemical Structure Chemical Structure

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride, USP.................................... 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Inactive Ingredients All strengths of Oxycodone and Acetaminophen Tablets, USP contain the inactive ingredients crospovidone, lactose monohydrate, povidone, pregelatinized corn starch, and stearic acid. The 5 mg/325 mg tablets contain FD&C Blue No. 1 Aluminum Lake as a colorant. The 7.5 mg/325 mg tablets contain FD&C Yellow No. 6 Aluminum Lake as a colorant. The 10 mg/325 mg tablets contain D&C Yellow No. 10 Aluminum Lake as a colorant. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: oxy-hcl-structure apap-structure

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet, for oral administration contains: Oxycodone hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone Hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 5 mg* (*5 mg oxycodone Hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone Hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone Hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg Inactive Ingredients The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Oxycodone and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 381.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: Oxycodone Hydrochloride Structure Acetaminophen Structure.jpg

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride, USP.................................... 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Inactive Ingredients All strengths of Oxycodone and Acetaminophen Tablets, USP contain the inactive ingredients crospovidone, lactose monohydrate, povidone, pregelatinized corn starch, and stearic acid. The 5 mg/325 mg tablets contain FD&C Blue No. 1 Aluminum Lake as a colorant. The 7.5 mg/325 mg tablets contain FD&C Yellow No. 6 Aluminum Lake as a colorant. The 10 mg/325 mg tablets contain D&C Yellow No. 10 Aluminum Lake as a colorant. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: oxy-hcl-structure Image

Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg Inactive Ingredients The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: 01 02