Drug Facts
Composition & Profile
Identifiers & Packaging
HOW SUPPLIED 20 mEq/L Potassium Chloride in 0.45% Sodium Chloride Injection, USP is supplied in 1000 mL single-dose flexible plastic containers (NDC 0409-9257-39) (NDC 0990-9257-39). ICU Medical is transitioning NDC codes from the "0409" to a "0990" labeler code. Both NDC codes are expected to be in the market for a period of time. Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Protect from freezing.; PRINCIPAL DISPLAY PANEL - 1000 mL Bag Label 20 mEq POTASSIUM 1000 mL NDC 0990-9257-39 POTASSIUM CHLORIDE in 0.45% Sodium Chloride Injection, USP 20 mEq EACH 100 mL CONTAINS POTASSIUM CHLORIDE 149 mg; SODIUM CHLORIDE 450 mg IN WATER FOR INJECTION. ELECTROLYTES PER 1000 mL: POTASSIUM 20 mEq; SODIUM 77 mEq; CHLORIDE; 97 mEq. 194 mOsmol/LITER (CALC.) pH 4.8 (3.5 to 6.5) ADDITIVES MAY BE INCOMPATIBLE. CONSULT WITH PHARMACIST, IF AVAILABLE. WHEN INTRODUCING ADDITIVES, USE ASEPTIC TECHNIQUE, MIX THOROUGHLY AND DO NOT STORE. SINGLE-DOSE CONTAINER. STORE AT 20 TO 25°C (68 TO 77°F). [SEE USP CONTROLLED ROOM TEMPERATURE.] PROTECT FROM FREEZING. FOR I.V. USE. USUAL DOSAGE: SEE INSERT. STERILE, NONPYROGENIC. USE ONLY IF SOLUTION IS CLEAR AND CONTAINER IS UNDAMAGED. MUST NOT BE USED IN SERIES CONNECTIONS. Rx ONLY 3 V CONTAINS DEHP IMP0000058 ICU Medical, Inc. Lake Forest, Illinois, 60045 USA icumedical PRINCIPAL DISPLAY PANEL - 1000 mL Bag Label; PRINCIPAL DISPLAY PANEL - 1000 mL Bag Overwrap TO OPEN TEAR AT NOTCH 2 HDPE DO NOT REMOVE FROM OVERWRAP UNTIL READY FOR USE. AFTER REMOVING THE OVERWRAP, CHECK FOR MINUTE LEAKS BY SQUEEZING CONTAINER FIRMLY. IF LEAKS ARE FOUND, DISCARD SOLUTION AS STERILITY MAY BE IMPAIRED. RECOMMENDED STORAGE: ROOM TEMPERATURE (25°C). AVOID EXCESSIVE HEAT. PROTECT FROM FREEZING. SEE INSERT. 98-4321-R14-3/98 PRINCIPAL DISPLAY PANEL - 1000 mL Bag Overwrap
- HOW SUPPLIED 20 mEq/L Potassium Chloride in 0.45% Sodium Chloride Injection, USP is supplied in 1000 mL single-dose flexible plastic containers (NDC 0409-9257-39) (NDC 0990-9257-39). ICU Medical is transitioning NDC codes from the "0409" to a "0990" labeler code. Both NDC codes are expected to be in the market for a period of time. Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Protect from freezing.
- PRINCIPAL DISPLAY PANEL - 1000 mL Bag Label 20 mEq POTASSIUM 1000 mL NDC 0990-9257-39 POTASSIUM CHLORIDE in 0.45% Sodium Chloride Injection, USP 20 mEq EACH 100 mL CONTAINS POTASSIUM CHLORIDE 149 mg; SODIUM CHLORIDE 450 mg IN WATER FOR INJECTION. ELECTROLYTES PER 1000 mL: POTASSIUM 20 mEq; SODIUM 77 mEq; CHLORIDE; 97 mEq. 194 mOsmol/LITER (CALC.) pH 4.8 (3.5 to 6.5) ADDITIVES MAY BE INCOMPATIBLE. CONSULT WITH PHARMACIST, IF AVAILABLE. WHEN INTRODUCING ADDITIVES, USE ASEPTIC TECHNIQUE, MIX THOROUGHLY AND DO NOT STORE. SINGLE-DOSE CONTAINER. STORE AT 20 TO 25°C (68 TO 77°F). [SEE USP CONTROLLED ROOM TEMPERATURE.] PROTECT FROM FREEZING. FOR I.V. USE. USUAL DOSAGE: SEE INSERT. STERILE, NONPYROGENIC. USE ONLY IF SOLUTION IS CLEAR AND CONTAINER IS UNDAMAGED. MUST NOT BE USED IN SERIES CONNECTIONS. Rx ONLY 3 V CONTAINS DEHP IMP0000058 ICU Medical, Inc. Lake Forest, Illinois, 60045 USA icumedical PRINCIPAL DISPLAY PANEL - 1000 mL Bag Label
- PRINCIPAL DISPLAY PANEL - 1000 mL Bag Overwrap TO OPEN TEAR AT NOTCH 2 HDPE DO NOT REMOVE FROM OVERWRAP UNTIL READY FOR USE. AFTER REMOVING THE OVERWRAP, CHECK FOR MINUTE LEAKS BY SQUEEZING CONTAINER FIRMLY. IF LEAKS ARE FOUND, DISCARD SOLUTION AS STERILITY MAY BE IMPAIRED. RECOMMENDED STORAGE: ROOM TEMPERATURE (25°C). AVOID EXCESSIVE HEAT. PROTECT FROM FREEZING. SEE INSERT. 98-4321-R14-3/98 PRINCIPAL DISPLAY PANEL - 1000 mL Bag Overwrap
Overview
Potassium Chloride in Sodium Chloride Injection, USP is a sterile, nonpyrogenic, solution for fluid and electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH and ionic concentration are shown in Table 1. Table 1: 20 mEq/ L Potassium Chloride in 0.45% Sodium Chloride Inj., USP Composition (g/L) Calculated Osmolarity (mOsmol/L) pH (range) Ionic Concentrations (mEq/L) NDC No. Size (mL) Sodium Chloride (NaCl) Potassium Chloride (KCl) Sodium (Na+) Potassium (K+) Chloride (Cl-) 0409-9257-39 1000 4.5 1.49 194 4.8 (3.5 to 6.5) 77 20 97 0990-9257-39 1000 4.5 1.49 194 4.8 (3.5 to 6.5) 77 20 97 The flexible plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.
Indications & Usage
Potassium Chloride in Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.
Dosage & Administration
Not available
Warnings & Precautions
WARNINGS Hypersensitivity Hypersensitivity and infusion reactions, including anaphylaxis and chills, have been reported with products containing potassium chloride and sodium chloride. Stop the infusion immediately if signs or symptoms of a hypersensitivity or infusion reaction develops. Appropriate therapeutic countermeasures must be instituted as clinically indicated. Electrolyte Imbalances Hyperkalemia Potassium-containing solutions, including Potassium Chloride in Sodium Chloride Injection, USP may increase the risk of hyperkalemia. Hyperkalemia can be asymptomatic and manifest only by increased serum potassium concentrations and/or characteristic electrocardiographic (ECG) changes. Cardiac conduction disorders (including complete heart block) and other cardiac arrhythmias, some fatal, can develop at any time during hyperkalemia. Continuous electrocardiogram (ECG) monitoring may be necessary to aid in the detection of cardiac arrhythmias due to hyperkalemia (see ADVERSE REACTIONS ). To avoid life threatening hyperkalemia, do not administer Potassium Chloride in Sodium Chloride Injection, USP as an intravenous push (i.e., intravenous injection manually with a syringe connected to the intravenous access) without a quantitative infusion device. Patients at increased risk of developing hyperkalemia and cardiac arrhythmias include those: with conditions predisposing to hyperkalemia and/or associated with increased sensitivity to potassium, such as patients with severe renal impairment, acute dehydration, extensive tissue injury or burns, certain cardiac disorders such as congestive heart failure or atrioventricular (AV) block (especially if they receive digoxin). who are at risk of experiencing hyperosmolality, acidosis, or undergoing correction of alkalosis (conditions associated with a shift of potassium from intracellular to extracellular space). treated concurrently or recently with agents or products that can cause or increase the risk of hyperkalemia (see DRUG INTERACTIONS ). with cardiac arrhythmias. Avoid use of Potassium Chloride in Sodium Chloride Injection, USP in patients with, or at risk for, hyperkalemia. If use cannot be avoided, use a product with a low amount of potassium chloride, infuse slowly and monitor serum potassium concentrations and ECGs. Hypernatremia and Hyperchloremia Electrolyte imbalances such as hypernatremia, hyperchloremia, and metabolic acidosis may occur with Potassium Chloride in Sodium Chloride Injection, USP. Conditions that may increase the risk of hypernatremia, fluid overload and edema (central and peripheral), include patients with: primary hyperaldosteronism; secondary hyperaldosteronism associated with, for example, hypertension, congestive heart failure, liver disease (including cirrhosis), renal disease (including renal artery stenosis, nephrosclerosis); and pre-eclampsia. Certain medications, such as corticosteroids or corticotropin, may also increase risk of sodium and fluid retention, see DRUG INTERACTIONS . Avoid Potassium Chloride in Sodium Chloride Injection, USP in patients with, or at risk for, hypernatremia or hyperchloremia. If use cannot be avoided, monitor serum sodium and chloride concentrations and acid-base balance. Rapid correction of hypernatremia is potentially dangerous with risk of serious neurologic complications. Excessively rapid correction of hypernatremia is also associated with a risk for serious neurologic complications such as osmotic demyelination syndrome (ODS) with risk of seizures and cerebral edema. Hyponatremia Potassium Chloride in Sodium Chloride Injection, USP may cause hyponatremia. Hyponatremia can lead to acute hyponatremic encephalopathy characterized by headache, nausea, seizures, lethargy, and vomiting. Patients with brain edema are at particular risk of severe, irreversible and life-threatening brain injury. The risk of hospital-acquired hyponatremia is increased in patients with cardiac or pulmonary failure, and in patients with non-osmotic vasopressin release (including SIADH) treated with high volume of hypotonic Potassium Chloride in Sodium Chloride Injection, USP. The risk for hyponatremia is increased in pediatric patients, elderly patients, postoperative patients, those with psychogenic polydipsia, and in patients treated with medications that increase the risk of hyponatremia (such as diuretics, certain antiepileptic and psychotropic medications). See DRUG INTERACTIONS . Patients at increased risk for developing complications of hyponatremia such as hyponatremic encephalopathy, include pediatric patients, women (in particular, premenopausal women), patients with hypoxemia, and patients with underlying central nervous system disease. Avoid Potassium Chloride in Sodium Chloride Injection, USP in patients with or at risk for hyponatremia. If use cannot be avoided, monitor serum sodium concentrations. Rapid correction of hyponatremia is potentially dangerous with risk of serious neurologic complications. Brain adaptations reducing risk of cerebral edema make the brain vulnerable to injury when chronic hyponatremia is too rapidly corrected, which is known as osmotic demyelination syndrome (ODS). To avoid complications, monitor serum sodium and chloride concentrations, fluid status, acid-base balance, and signs of neurologic complications. Fluid Overload Depending on the volume and rate of infusion, and the patient's underlying clinical condition, the intravenous administration of Potassium Chloride in Sodium Chloride Injection, USP can cause electrolyte disturbances such as overhydration/hypervolemia and congested states including central (e.g., pulmonary edema) and peripheral edema. Avoid Potassium Chloride in Sodium Chloride Injection, USP in patients with or at risk for fluid and/or solute overloading. If use cannot be avoided, monitor fluid balance, electrolyte concentrations and acid base balance as needed and especially during prolonged use.
Contraindications
Potassium Chloride in Sodium Chloride Injection, USP is contraindicated in patients with: Known hypersensitivity to potassium chloride and/or sodium chloride (see WARNINGS ). Clinically significant hyperkalemia (see WARNINGS ).
Adverse Reactions
The following adverse reactions associated with the use of Potassium Chloride in Sodium Chloride Injection, USP were identified in clinical trials or postmarketing reports. Because postmarketing reactions were reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency, reliably, or to establish a causal relationship to drug exposure. General disorders and administration site conditions: Chills, and infusion site pain. Hypersensitivity reactions: generalized papules and erythema, rash, fever, vomiting, hypertension, tachycardia. Metabolism and nutrition disorders: Hyperkalemia, hyponatremia, hypernatremia, hyperchloremia acidosis, fluid overload. Cardiac disorders: Cardiac arrest as a manifestation of rapid intravenous administration and/or of hyperkalemia. Nervous System Disorders: Hyponatremic encephalopathy. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.
Drug Interactions
Lithium Renal sodium and lithium clearance may be increased during administration of Potassium Chloride in Sodium Chloride Injection, USP and result in decreased lithium concentrations. Monitor serum lithium concentrations during concomitant use. Other Products that Cause Hyperkalemia Administration of Potassium Chloride in Sodium Chloride Injection, USP in patients treated concurrently or recently with products that are associated with hyperkalemia increases the risk of severe and potentially fatal hyperkalemia, in particular in the presence of other risk factors for hyperkalemia. Avoid use of Potassium Chloride in Sodium Chloride Injection, USP in patients receiving such products (e.g., potassium sparing diuretics, angiotensin-converting enzyme inhibitors, angiotensin receptor blockers, or the immunosuppressants cyclosporine and tacrolimus). If use cannot be avoided, monitor serum potassium concentrations. Other Products that Affect Fluid and/or Electrolyte Balance Administration of Potassium Chloride in Sodium Chloride Injection, USP in patients treated concomitantly with medications associated with sodium and fluid retention may increase the risk of hypernatremia and volume overload. Avoid use of Potassium Chloride in Sodium Chloride Injection, USP in patients receiving such products, such as corticosteroids or corticotropin. If use cannot be avoided, monitor serum electrolytes, fluid balance, and acid-base balance. Other Drugs that Increase the Risk of Hyponatremia Administration of Potassium Chloride in Sodium Chloride Injection, USP in patients treated concomitantly with medications associated with hyponatremia may increase the risk of developing hyponatremia. Avoid use of Potassium Chloride in Sodium Chloride Injection, USP in patients receiving products, such as diuretics, and certain antiepileptic and psychotropic medications. Drugs that increase the vasopressin effect reduce renal electrolyte free water excretion and may also increase the risk of hyponatremia following treatment with intravenous fluids. If use cannot be avoided, monitor serum sodium concentrations.
Storage & Handling
Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.] Protect from freezing.
Similar Drugs
Related medications based on brand, generic name, substance, active ingredients.