Piperacillin and Tazobactam and Sodium Chloride PIPERACILLIN AND TAZOBACTAM AND SODIUM CHLORIDE B. BRAUN MEDICAL INC. FDA Approved Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is supplied as a sterile powder for injection and a sterile solution in a single-dose DUPLEX ® Container with a strength of 2.25 g, 3.375 g, or 4.5 g in the following presentations: 2.25 g: contains 2 grams of piperacillin (equivalent to 2.085 g of piperacillin sodium), 0.25 g of tazobactam (equivalent to 0.269 g of tazobactam sodium), 0.5 mg of edetate sodium dihydrate (EDTA), and 100 mg of sodium citrate dihydrate in the powder chamber. The diluent chamber contains 225 mg of sodium chloride and 50 mL of water for injection. 3.375 g: contains 3 grams of piperacillin (equivalent to 3.127 g of piperacillin sodium) and 0.375 g of tazobactam (equivalent to 0.402 g of tazobactam sodium), 0.75 mg of EDTA, and 150 mg of sodium citrate dihydrate in the powder chamber. The diluent chamber contains 150 mg of sodium chloride and 50 mL of water for injection. 4.5 g: contains 4 grams of piperacillin (equivalent to 4.170 g of piperacillin sodium), 0.5 g of tazobactam (equivalent to 0.538 g of tazobactam sodium), 1 mg of EDTA, and 200 mg of sodium citrate dihydrate. The diluent chamber contains 450 mg of sodium chloride and 100 mL of water for injection. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection contains a total of 9.6 mEq (220 mg), 11.1 mEq (256 mg), and 19.1 mEq (440 mg) of sodium (Na+) per 2.25 g, 3.375 g, and 4.5 g product, respectively [see Warnings and Precautions (5.8) and Use in Specific Populations (8.5) ] . The reconstituted solution has a pH between 5.0 and 7.0. The osmolality of the reconstituted solution of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is approximately 318 mOsmol/kg for the 2.25 g strength, approximately 348 mOsmol/kg for the 3.375 g strength, and approximately 318 mOsmol/kg for the 4.5 g strength. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection Meets USP Monograph Organic Impurities Procedure 3. The DUPLEX ® Container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene copolymer that contains no plasticizers. Not made with natural rubber latex, PVC or Di(2-ethylhexyl)phthalate (DEHP). Chemical Structure illustration of piperacillin sodium Chemical structure illustration of tazobactam sodium

Drug Facts

Composition & Profile

Dosage Forms
Injection
Strengths
2.25 g 2 g 0.25 g 50 ml 0.45 % 3.375 g 3 g 0.375 g 0.3 % 4.5 g 4 g 0.5 g 100 ml 220 mg 256 mg 440 mg
Quantities
50 ml 100 ml 11 container 22 container
Treats Conditions
1 Indications And Usage Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is A Combination Of Piperacillin A Penicillin Class Antibacterial And Tazobactam A Beta Lactamase Inhibitor Indicated For The Treatment Of Intra Abdominal Infections In Adult And Pediatric Patients 2 Months Of Age And Older 1 1 Nosocomial Pneumonia In Adult And Pediatric Patients 2 Months Of Age And Older 1 2 Skin And Skin Structure Infections In Adults 1 3 Female Pelvic Infections In Adults 1 4 Community Acquired Pneumonia In Adults 1 5 Usage To Reduce Development Of Drug Resistant Bacteria To Reduce The Development Of Drug Resistant Bacteria And Maintain The Effectiveness Of Piperacillin And Tazobactam For Injection And Sodium Chloride Injection And Other Antibacterial Drugs Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Should Be Used Only To Treat Or Prevent Infections That Are Proven Or Strongly Suspected To Be Caused By Bacteria 1 6 1 1 Intra Abdominal Infections Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is Indicated In Adults And Pediatric Patients 2 Months Of Age And Older For The Treatment Of Appendicitis Complicated By Rupture Or Abscess And Peritonitis Caused By Beta Lactamase Producing Isolates Of Escherichia Coli Or The Following Members Of The Bacteroides Fragilis Group B Fragilis B Ovatus B Thetaiotaomicron Or B Vulgatus 1 2 Nosocomial Pneumonia Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is Indicated In Adults And Pediatric Patients 2 Months Of Age And Older For The Treatment Of Nosocomial Pneumonia Moderate To Severe Caused By Beta Lactamase Producing Isolates Of Staphylococcus Aureus And By Piperacillin And Tazobactam Susceptible Acinetobacter Baumannii Haemophilus Influenzae Klebsiella Pneumoniae And Pseudomonas Aeruginosa Nosocomial Pneumonia Caused By P Aeruginosa Should Be Treated In Combination With An Aminoglycoside See Dosage And Administration 2 1 3 Skin And Skin Structure Infections Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is Indicated In Adults For The Treatment Of Uncomplicated And Complicated Skin And Skin Structure Infections Including Cellulitis Cutaneous Abscesses And Ischemic Diabetic Foot Infections Caused By Beta Lactamase Producing Isolates Of Staphylococcus Aureus 1 4 Female Pelvic Infections Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is Indicated In Adults For The Treatment Of Postpartum Endometritis Or Pelvic Inflammatory Disease Caused By Beta Lactamase Producing Isolates Of Escherichia Coli 1 5 Community Acquired Pneumonia Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Is Indicated In Adults For The Treatment Of Community Acquired Pneumonia Moderate Severity Only Caused By Beta Lactamase Producing Isolates Of Haemophilus Influenzae 1 6 Usage To Reduce Development Of Drug Resistant Bacteria To Reduce The Development Of Drug Resistant Bacteria And Maintain The Effectiveness Of Piperacillin And Tazobactam For Injection And Sodium Chloride Injection And Other Antibacterial Drugs Piperacillin And Tazobactam For Injection And Sodium Chloride Injection Should Be Used Only To Treat Or Prevent Infections That Are Proven Or Strongly Suspected To Be Caused By Bacteria When Culture And Susceptibility Information Are Available They Should Be Considered In Selecting Or Modifying Antibacterial Therapy In The Absence Of Such Data Local Epidemiology And Susceptibility Patterns May Contribute To The Empiric Selection Of Therapy

Identifiers & Packaging

Container Type BOTTLE
UNII
UXA545ABTT M98T69Q7HP
Packaging

16 HOW SUPPLIED/STORAGE AND HANDLING Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP is a white to off-white powder and a clear, colorless solution supplied in a single-dose DUPLEX ® Container (packaged 24 single-dose units per case) in the following strengths described in Table 8 below: Table 8: Strengths, Volume of Diluent, National Drug Code (NDC), Total Sodium for Piperacillin and Tazobactam for Injection and Sodium Chloride Injection Strength (piperacillin and tazobactam) Piperacillin Tazobactam Volume of Diluent NDC Total Sodium REF 2.25 g 2 g 0.25 g 50 mL of 0.45% Sodium Chloride 0264- 3446-11 9.6 mEq (220 mg) 3446-11 3.375 g 3 g 0.375 g 50 mL of 0.3% Sodium Chloride 0264- 3448-11 11.1 mEq (256 mg) 3448-11 4.5 g 4 g 0.5 g 100 mL of 0.45% Sodium Chloride 0264- 3450-22 19.1 mEq (440 mg) 3450-22 Prior to reconstitution, store Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Do not remove the foil strip until ready to use to protect from light. After removal of the foil strip, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Storage conditions for reconstituted Piperacillin and Tazobactam for Injection are described in another section of labeling [see Dosage and Administration (2.5) ]. Do not freeze.; PRINCIPAL DISPLAY PANEL – 2.25 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 2.25 g* 50 mL NDC 0264-3446-11 DUPLEX ® CONTAINER U SE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 2 g piperacillin (equivalent to 2.085 g of piperacillin sodium), 0.25 g tazobactam (equivalent to 0.268 g of tazobactam sodium), 0.5 mg of edetate disodium dihydrate, and 100 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 50 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 2 g of piperacillin and 0.25 g of tazobactam) and 50 mL of 0.45% sodium chloride injection. Total sodium content of 220 mg (9.6 mEq). Approximate osmolality: 318 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3446-11 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643446113 Prepared in Italy. API from Italy. Y37-002-612 LD-804-2 F50000403335 3446-11 Container Label; PRINCIPAL DISPLAY PANEL – 3.375 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 3.375 g* 50 mL NDC 0264-3448-11 DUPLEX ® CONTAINER USE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 3 g piperacillin (equivalent to 3.127 g of piperacillin sodium), 0.375 g tazobactam (equivalent to 0.402 g of tazobactam sodium), 0.75 mg of edetate disodium dihydrate, and 150 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 50 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 3 g of piperacillin and 0.375 g of tazobactam) and 50 mL of 0.3% sodium chloride injection. Total sodium content of 256 mg (11.1 mEq). Approximate osmolality: 348 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3448-11 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643448117 Prepared in Italy. API from Italy. Y37-002-613 LD-805-2 F50000403338 3448-11 Container Label; PRINCIPAL DISPLAY PANEL – 4.5 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 4.5 g* 100 mL NDC 0264-3450-22 DUPLEX ® CONTAINER USE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 4 g piperacillin (equivalent to 4.170 g of piperacillin sodium), 0.5 g tazobactam (equivalent to 0.537 g of tazobactam sodium), 1 mg of edetate disodium dihydrate, and 200 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 100 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 4 g of piperacillin and 0.5 g of tazobactam) and 100 mL of 0.45% sodium chloride injection. Total sodium content of 440 mg (19.1 mEq). Approximate osmolality: 318 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3450-22 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643450226 Prepared in Italy. API from Italy. Y37-002-614 LD-806-2 F50000403339 3450-22 Container Label

Package Descriptions
  • 16 HOW SUPPLIED/STORAGE AND HANDLING Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP is a white to off-white powder and a clear, colorless solution supplied in a single-dose DUPLEX ® Container (packaged 24 single-dose units per case) in the following strengths described in Table 8 below: Table 8: Strengths, Volume of Diluent, National Drug Code (NDC), Total Sodium for Piperacillin and Tazobactam for Injection and Sodium Chloride Injection Strength (piperacillin and tazobactam) Piperacillin Tazobactam Volume of Diluent NDC Total Sodium REF 2.25 g 2 g 0.25 g 50 mL of 0.45% Sodium Chloride 0264- 3446-11 9.6 mEq (220 mg) 3446-11 3.375 g 3 g 0.375 g 50 mL of 0.3% Sodium Chloride 0264- 3448-11 11.1 mEq (256 mg) 3448-11 4.5 g 4 g 0.5 g 100 mL of 0.45% Sodium Chloride 0264- 3450-22 19.1 mEq (440 mg) 3450-22 Prior to reconstitution, store Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Do not remove the foil strip until ready to use to protect from light. After removal of the foil strip, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Storage conditions for reconstituted Piperacillin and Tazobactam for Injection are described in another section of labeling [see Dosage and Administration (2.5) ]. Do not freeze.
  • PRINCIPAL DISPLAY PANEL – 2.25 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 2.25 g* 50 mL NDC 0264-3446-11 DUPLEX ® CONTAINER U SE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 2 g piperacillin (equivalent to 2.085 g of piperacillin sodium), 0.25 g tazobactam (equivalent to 0.268 g of tazobactam sodium), 0.5 mg of edetate disodium dihydrate, and 100 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 50 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 2 g of piperacillin and 0.25 g of tazobactam) and 50 mL of 0.45% sodium chloride injection. Total sodium content of 220 mg (9.6 mEq). Approximate osmolality: 318 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3446-11 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643446113 Prepared in Italy. API from Italy. Y37-002-612 LD-804-2 F50000403335 3446-11 Container Label
  • PRINCIPAL DISPLAY PANEL – 3.375 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 3.375 g* 50 mL NDC 0264-3448-11 DUPLEX ® CONTAINER USE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 3 g piperacillin (equivalent to 3.127 g of piperacillin sodium), 0.375 g tazobactam (equivalent to 0.402 g of tazobactam sodium), 0.75 mg of edetate disodium dihydrate, and 150 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 50 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 3 g of piperacillin and 0.375 g of tazobactam) and 50 mL of 0.3% sodium chloride injection. Total sodium content of 256 mg (11.1 mEq). Approximate osmolality: 348 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3448-11 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643448117 Prepared in Italy. API from Italy. Y37-002-613 LD-805-2 F50000403338 3448-11 Container Label
  • PRINCIPAL DISPLAY PANEL – 4.5 g Container Piperacillin and Tazobactam for Injection USP and Sodium Chloride Injection USP 4.5 g* 100 mL NDC 0264-3450-22 DUPLEX ® CONTAINER USE ONLY AFTER MIXING CONTENTS OF BOTH CHAMBERS. FOR INTRAVENOUS INFUSION. SINGLE-DOSE * Each dry powder chamber provides 4 g piperacillin (equivalent to 4.170 g of piperacillin sodium), 0.5 g tazobactam (equivalent to 0.537 g of tazobactam sodium), 1 mg of edetate disodium dihydrate, and 200 mg of sodium citrate dihydrate. Contains no preservative. After reconstitution each 100 mL single-dose DUPLEX ® unit contains Piperacillin and Tazobactam for Injection (equivalent to 4 g of piperacillin and 0.5 g of tazobactam) and 100 mL of 0.45% sodium chloride injection. Total sodium content of 440 mg (19.1 mEq). Approximate osmolality: 318 mOsmol/kg. Dosage: see Prescribing Information. Prior to Reconstitution: Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F). [See USP Controlled Room Temperature.] Use only if container and seals are intact. Do not peel foil strip until ready for use in order to protect from light. After foil strip removal, product must be used within 7 days, but not beyond the labeled expiration date. Protect from light after removal of foil strip. Reconstitute Prior to Administration: Hold container with set port in a downward direction and fold the diluent chamber just below the solution meniscus. To activate seal, squeeze folded diluent chamber until seal between diluent and drug chamber opens, releasing diluent into drug chamber. Agitate the reconstituted solution until the drug powder is completely dissolved. Fold the container a second time and squeeze until seal between drug chamber and set port opens. After Reconstitution: Use only if prepared solution is clear and free from particulate matter. Use within 24 hours if stored at room temperature or within 7 days if stored under refrigeration. Do not use in a series connection. Do not introduce additives into this container. Prior to administration check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be impaired. Do not freeze. Discard unused portion. Not made with natural rubber latex, PVC or DEHP. REF 3450-22 Rx only Manufactured for: B. Braun Medical Inc. Exp : Lot No: NDC No. (01)10302643450226 Prepared in Italy. API from Italy. Y37-002-614 LD-806-2 F50000403339 3450-22 Container Label

Overview

Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is supplied as a sterile powder for injection and a sterile solution in a single-dose DUPLEX ® Container with a strength of 2.25 g, 3.375 g, or 4.5 g in the following presentations: 2.25 g: contains 2 grams of piperacillin (equivalent to 2.085 g of piperacillin sodium), 0.25 g of tazobactam (equivalent to 0.269 g of tazobactam sodium), 0.5 mg of edetate sodium dihydrate (EDTA), and 100 mg of sodium citrate dihydrate in the powder chamber. The diluent chamber contains 225 mg of sodium chloride and 50 mL of water for injection. 3.375 g: contains 3 grams of piperacillin (equivalent to 3.127 g of piperacillin sodium) and 0.375 g of tazobactam (equivalent to 0.402 g of tazobactam sodium), 0.75 mg of EDTA, and 150 mg of sodium citrate dihydrate in the powder chamber. The diluent chamber contains 150 mg of sodium chloride and 50 mL of water for injection. 4.5 g: contains 4 grams of piperacillin (equivalent to 4.170 g of piperacillin sodium), 0.5 g of tazobactam (equivalent to 0.538 g of tazobactam sodium), 1 mg of EDTA, and 200 mg of sodium citrate dihydrate. The diluent chamber contains 450 mg of sodium chloride and 100 mL of water for injection. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection contains a total of 9.6 mEq (220 mg), 11.1 mEq (256 mg), and 19.1 mEq (440 mg) of sodium (Na+) per 2.25 g, 3.375 g, and 4.5 g product, respectively [see Warnings and Precautions (5.8) and Use in Specific Populations (8.5) ] . The reconstituted solution has a pH between 5.0 and 7.0. The osmolality of the reconstituted solution of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is approximately 318 mOsmol/kg for the 2.25 g strength, approximately 348 mOsmol/kg for the 3.375 g strength, and approximately 318 mOsmol/kg for the 4.5 g strength. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection Meets USP Monograph Organic Impurities Procedure 3. The DUPLEX ® Container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene copolymer that contains no plasticizers. Not made with natural rubber latex, PVC or Di(2-ethylhexyl)phthalate (DEHP). Chemical Structure illustration of piperacillin sodium Chemical structure illustration of tazobactam sodium

Indications & Usage

Piperacillin and Tazobactam for Injection and Sodium Chloride Injection, is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: Intra-abdominal infections in adult and pediatric patients 2 months of age and older ( 1.1 ) Nosocomial pneumonia in adult and pediatric patients 2 months of age and older ( 1.2 ) Skin and skin structure infections in adults ( 1.3 ) Female pelvic infections in adults ( 1.4 ) Community-acquired pneumonia in adults ( 1.5 ) Usage to Reduce Development of Drug-Resistant Bacteria To reduce the development of drug-resistant bacteria and maintain the effectiveness of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and other antibacterial drugs, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. ( 1.6 ) 1.1 Intra-abdominal Infections Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of appendicitis (complicated by rupture or abscess) and peritonitis caused by beta-lactamase producing isolates of Escherichia coli or the following members of the Bacteroides fragilis group: B. fragilis, B. ovatus, B. thetaiotaomicron, or B. vulgatus . 1.2 Nosocomial Pneumonia Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of nosocomial pneumonia (moderate to severe) caused by beta-lactamase producing isolates of Staphylococcus aureus and by piperacillin and tazobactam-susceptible Acinetobacter baumannii, Haemophilus influenzae, Klebsiella pneumoniae, and Pseudomonas aeruginosa (Nosocomial pneumonia caused by P. aeruginosa should be treated in combination with an aminoglycoside) [see Dosage and Administration (2) ]. 1.3 Skin and Skin Structure Infections Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is indicated in adults for the treatment of uncomplicated and complicated skin and skin structure infections, including cellulitis, cutaneous abscesses and ischemic/diabetic foot infections caused by beta-lactamase producing isolates of Staphylococcus aureus . 1.4 Female Pelvic Infections Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is indicated in adults for the treatment of postpartum endometritis or pelvic inflammatory disease caused by beta-lactamase producing isolates of Escherichia coli . 1.5 Community-acquired Pneumonia Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is indicated in adults for the treatment of community-acquired pneumonia (moderate severity only) caused by beta-lactamase producing isolates of Haemophilus influenzae . 1.6 Usage to Reduce Development of Drug-Resistant Bacteria To reduce the development of drug-resistant bacteria and maintain the effectiveness of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and other antibacterial drugs, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Dosage & Administration

If a dose of Piperacillin and Tazobactam for Injection and Sodium Chloride injection is required that is not equal to 2.25 g, 3.375 g, or 4.5 g, this product is not recommended for use and an alternative formulation of piperacillin and tazobactam for injection should be considered ( 2.1 ). Adult Patients With Indications Other Than Nosocomial Pneumonia; The usual daily dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection, for intravenous use for adults is 3.375 g every 6 ( six ) hours. ( 2.2 ) Adult Patients with Nosocomial Pneumonia: Initial presumptive treatment of patients with nosocomial pneumonia should start with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection, for intravenous use at a dosage of 4.5 g every 6 ( six ) hours plus an aminoglycoside. (2.3 ) Adult Patients with Renal Impairment: Dosage in patients with renal impairment (creatinine clearance ≤40 mL/min) and dialysis patients should be reduced, based on the degree of renal impairment. ( 2.4 ) Pediatric Patients by Indication and Age: See Table below ( 2.5 ) Recommended Dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection for Pediatric Patients 2 months of Age and Older, Weighing up to 40 Kg and With Normal Renal Function Age Appendicitis and /or Peritonitis Nosocomial Pneumonia 2 months to 9 months 90 mg/kg (80 mg piperacillin and 10 mg tazobactam) every 8 ( eight ) hours 90 mg/kg (80 mg piperacillin and 10 mg tazobactam) every 6 ( six ) hours Older than 9 months 112.5 mg/kg (100 mg piperacillin and 12.5 mg tazobactam) every 8 ( eight) hours 112.5 mg/kg (100 mg piperacillin and 12.5 mg tazobactam) every 6 ( six) hours Administer Piperacillin and Tazobactam for Injection and Sodium Chloride Injection by intravenous infusion over 30 minutes to both adult and pediatric patients 2 months of age and older. ( 2.2 , 2.3 , 2.4 , 2.5 ) Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and aminoglycosides should be reconstituted and administered separately. Co-administration via Y-site can be done under certain conditions. ( 2.7 ) See the full prescribing information for the preparation and administration instructions for Piperacillin and Tazobactam for Injection and Sodium Chloride Injection single-dose DUPLEX ® Container. 2.1 Important Administration Instructions If a dose of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is required that does not equal 2.25 g, 3.375 g, or 4.5 g, this product is not recommended for use and an alternative formulation of piperacillin and tazobactam for injection should be considered. 2.2 Recommended Dosage in Adult Patients With Indications Other Than Nosocomial Pneumonia The usual total daily dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection for adult patients with indications other than nosocomial pneumonia is 3.375 g every 6 ( six ) hours, to be administered by intravenous infusion over 30 minutes. The usual duration of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection treatment is from 7 to 10 days. 2.3 Recommended Dosage in Adult Patients With Nosocomial Pneumonia Initial presumptive treatment of adult patients with nosocomial pneumonia should start with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection at a dosage of 4.5 g every 6 ( six ) hours plus an aminoglycoside, administered by intravenous infusion over 30 minutes. The recommended duration of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection treatment for nosocomial pneumonia is 7 to 14 days. Treatment with the aminoglycoside should be continued in patients from whom P. aeruginosa is isolated. 2.4 Recommended Dosage in Adult Patients With Renal Impairment In adult patients with renal impairment (creatinine clearance ≤ 40 mL/min) and dialysis patients (hemodialysis and CAPD), the intravenous dose of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should be reduced based on the degree of renal impairment. The recommended daily dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection for patients with renal impairment administered by intravenous infusion over 30 minutes is described in Table 1. Table 1: Recommended Dosage of Piperacillin and Tazobactam in Patients with Normal Renal Function and Renal Impairment (As total grams piperacillin and tazobactam) Administer Piperacillin and Tazobactam for Injection and Sodium Chloride Injection by intravenous infusion over 30 minutes. Creatinine clearance, mL/min All Indications (except nosocomial pneumonia) Nosocomial Pneumonia Greater than 40 mL/min 3.375 g every 6 hours 4.5 g every 6 hours 20 to 40 mL/min Creatinine clearance for patients not receiving hemodialysis 2.25 g every 6 hours 3.375 g every 6 hours Less than 20 mL/min 2.25 g every 8 hours 2.25 g every 6 hours Hemodialysis 0.75 g (0.67 g piperacillin and 0.08 g tazobactam) should be administered following each hemodialysis session on hemodialysis days 2.25 g every 12 hours 2.25 g every 8 hours CAPD 2.25 g every 12 hours 2.25 g every 8 hours For patients on hemodialysis, the maximum dose is 2.25 g every 12 hours for all indications other than nosocomial pneumonia and 2.25 g every 8 hours for nosocomial pneumonia. Since hemodialysis removes 30% to 40% of the administered dose, an additional dose of 0.75 g piperacillin and tazobactam for injection should be administered following each dialysis period on hemodialysis days. No additional dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is necessary for CAPD patients. 2.5 Dosage in Pediatric Patients 2 months of Age and Older With Appendicitis (complicated by rupture or abscess) and/or Peritonitis or Nosocomial Pneumonia with normal renal function If a dose of Piperacillin and Tazobactam for Injection and Sodium Chloride injection is required that is not equal to 2.25 g, 3.375 g, or 4.5 g, this product is not recommended for use and an alternative formulation of piperacillin and tazobactam for injection should be considered [see Use in Specific Populations (8.4) ]. The recommended dosage for pediatric patients with appendicitis (complicated by rupture or abscess) and/or peritonitis or nosocomial pneumonia aged 2 months of age and older, weighing up to 40 kg, and with normal renal function, is described in Table 2 [see Use in Specific Populations (8.4) and Clinical Pharmacology (12.3) ]. Table 2: Recommended Dosage of Piperacillin and Tazobactam in Pediatric Patients 2 Months of Age and Older, Weighing Up to 40 kg, and With Normal Renal Function Administer Piperacillin and Tazobactam for Injection and Sodium Chloride Injection by intravenous infusion over 30 minutes Age Appendicitis and/or Peritonitis Nosocomial Pneumonia 2 months to 9 months 90 mg/kg (80 mg piperacillin and 10 mg tazobactam) every 8 ( eight ) hours 90 mg/kg (80 mg piperacillin and 10 mg tazobactam) every 6 ( six ) hours Older than 9 months of age 112.5 mg/kg (100 mg piperacillin and 12.5 mg tazobactam) every 8 ( eight ) hours 112.5 mg/kg (100 mg piperacillin and 12.5 mg tazobactam) every 6 ( six ) hours Pediatric patients weighing over 40 kg and with normal renal function should receive the adult dose [see Dosage and Administration ( 2.2 , 2.3 )]. Dosage of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection in pediatric patients with renal impairment has not been determined. 2.6 Preparation and Administration of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection in the DUPLEX ® Container Important Administration Instructions Do not use in series connections. Such use would result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is complete. If administration is controlled by a pumping device, care must be taken to discontinue pumping action before the container runs dry or air embolism may result. Do not introduce additives into the DUPLEX ® Container. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is not chemically stable in solutions that contain only sodium bicarbonate and solutions that significantly alter the pH. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should not be added to blood products or albumin hydrolysates. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Use only if solution is clear and container and seals are intact. Administer Piperacillin and Tazobactam for Injection and Sodium Chloride Injection intravenously over 30 minutes. This reconstituted solution is for intravenous use only. DUPLEX ® Container Storage To avoid inadvertent activation, the DUPLEX ® Container should remain in the folded position until activation is intended. Patient Labeling and Drug Powder/Diluent Inspection Apply patient-specific label on foil side of container. Use care to avoid activation. Do not cover any portion of foil strip with patient label. Peel sticker halfway off and unfold DUPLEX ® Container (see Diagram 1 ). Visually inspect diluent chamber for particulate matter. Use only if container and seals are intact. To inspect the drug powder for foreign matter or discoloration, peel foil strip from drug chamber (see Diagram 2 ). Protect from light after removal of foil strip. Note: If foil strip is removed, the container should be re-folded and the sticker reapplied until ready to activate. The product must then be used within 7 days at room temperature at 20°C to 25°C (68°F to 77°F), but not beyond the labeled expiration date. Reconstitution (Activation) Do not use directly after storage by refrigeration, allow the product to equilibrate to room temperature before patient use. Unfold the DUPLEX ® Container and point the set port in a downward direction. Starting at the hanger tab end, fold the DUPLEX ® Container just below the diluent meniscus trapping all air above the fold. To activate, squeeze the folded diluent chamber until the seal between the diluent and powder opens, releasing diluent into the drug powder chamber (see Diagram 3 ). Agitate the liquid-powder mixture until the drug powder is completely dissolved. Note: Following reconstitution (activation), the reconstituted product must be used within 24 hours if stored at room temperature at 20°C to 25°C (68°F to 77°F) or within 7 days if stored under refrigeration at 2°C to 8°C (36°F to 46°F). Administration Visually inspect the reconstituted solution for particulate matter. Point the set port in a downwards direction. Starting at the hanger tab end, fold the DUPLEX ® Container just below the solution meniscus trapping all air above the fold. Squeeze the folded DUPLEX ® Container until the seal between reconstituted drug solution and set port opens, releasing liquid to set port (see Diagram 4 ). Prior to attaching the intravenous set, check for minute leaks by squeezing container firmly. If leaks are found, discard container and solution as sterility may be compromised. Using aseptic technique, peel foil cover from the set port and attach sterile administration set (see Diagram 5 ). Refer to directions for use accompanying the administration set. Discard unused portion. Compatible Intravenous Solutions for Co-administration via a Y-site 0.9% sodium chloride for injection Sterile water for injection (Maximum recommended volume per dose of sterile water for injection is 50 mL) Dextrose 5% Lactated Ringer's Solution Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should not be mixed with other drugs in a syringe or infusion bottle since compatibility has not been established. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection for Pediatric Patients Weighing up to 40 kg The volume of reconstituted solution required to deliver the dose of Piperacillin and Tazobactam is dependent on the weight of the pediatric patient [see Dosage and Administration (2.5) ]. 1. Calculate patient dose as described in Table 2 above [see Dosage and Administration (2.5) ]. 2. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection in the DUPLEX ® Container should be used only in patients who require the entire 2.25 g, 3.375 g, or 4.5 g dose and not any fraction thereof. Stability of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection Following Reconstitution Stability studies after reconstitution in the DUPLEX ® Containers, have demonstrated chemical stability (potency, pH of reconstituted solution and clarity of solution) for up to 24 hours at room temperature at 20°C to 25°C (68°F to 77°F) and up to 7 days at refrigerated temperature at 2°C to 8°C (36°F to 46°F). Piperacillin and Tazobactam for Injection and Sodium Chloride Injection contains no preservatives. Appropriate consideration of aseptic technique should be used. Diagram 1 Diagram 2 Diagram 3 Diagram 4 Diagram 5 2.7 Compatibility With Aminoglycosides Due to the in vitro inactivation of aminoglycosides by piperacillin, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and aminoglycosides are recommended for separate administration. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and aminoglycosides should be reconstituted and administered separately when concomitant therapy with aminoglycosides is indicated [see Drug Interactions (7.1) ]. In circumstances where co-administration via Y-site is necessary, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is compatible for simultaneous co-administration via Y-site infusion only with the following aminoglycosides under the following conditions: Table 3: Compatibility with Aminoglycosides Aminoglycoside Piperacillin and Tazobactam Dose Piperacillin and Tazobactam Diluent Volume Aminoglycoside Concentration Range The concentration ranges in Table 3 are based on administration of the aminoglycoside in divided doses (10 to 15 mg/kg/day in two daily doses for amikacin and 3 to 5 mg/kg/day in three daily doses for gentamicin). Administration of amikacin or gentamicin in a single daily dose or in doses exceeding those stated above via Y-site with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection has not been evaluated. See package insert for each aminoglycoside for complete Dosage and Administration instructions. Acceptable Diluents for Aminoglycosides Amikacin 2.25 g 3.375 g 4.5 g 50 mL 50 mL 100 mL 1.75 mg/mL to 7.5 mg/mL 0.9% sodium chloride or 5% dextrose Gentamicin 2.25 g 3.375 g 4.5 g 50 mL 50 mL 100 mL 0.7 mg/mL to 3.32 mg/mL 0.9% sodium chloride or 5% dextrose Only the concentration and diluents for amikacin or gentamicin with the dosages of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection listed above have been established as compatible for co-administration via Y-site infusion. Simultaneous co-administration via Y-site infusion in any manner other than listed above may result in inactivation of the aminoglycoside by Piperacillin and Tazobactam for Injection and Sodium Chloride Injection. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is not compatible with tobramycin for simultaneous co-administration via Y-site infusion. Compatibility of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection with other aminoglycosides has not been established.

Warnings & Precautions
Serious hypersensitivity reactions (anaphylactic/anaphylactoid) reactions have been reported in patients receiving piperacillin and tazobactam. Discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection if a reaction occurs. ( 5.1 ) Piperacillin and tazobactam may cause severe cutaneous adverse reactions, such as Stevens-Johnson syndrome, toxic epidermal necrolysis, drug reaction with eosinophilia and systemic symptoms, and acute generalized exanthematous pustulosis. Discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection for progressive rashes. ( 5.2 ) Hemophagocytic lymphohistiocytosis (HLH) has been reported with the use of piperacillin and tazobactam. If HLH is suspected, discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection immediately. ( 5.3 ) Rhabdomyolysis: If signs or symptoms of rhabdomyolysis are observed, discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and initiate appropriate therapy. ( 5.4 ) Hematological effects (including bleeding, leukopenia and neutropenia) have occurred. Monitor hematologic tests during prolonged therapy. ( 5.5 ) As with other penicillins, piperacillin and tazobactam may cause neuromuscular excitability or seizures. Patients receiving higher doses, especially in the presence of renal impairment may be at greater risk. Closely monitor patients with renal impairment or seizure disorders for signs and symptoms of neuromuscular excitability or seizures. ( 5.6 ) Nephrotoxicity in critically ill patients has been observed; the use of piperacillin and tazobactam was found to be an independent risk factor for renal failure and was associated with delayed recovery of renal function as compared to other beta-lactam antibacterial drugs in a randomized, multicenter, controlled trial in critically ill patients. Based on this study, alternative treatment options should be considered in the critically ill population. If alternative treatment options are inadequate or unavailable, monitor renal function during treatment with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection. ( 5.7 ) High Sodium Load and Electrolyte Effects: Piperacillin and Tazobactam for Injection and Sodium Chloride Injection contains a total of 220 mg, 256 mg, 440 mg of sodium per 2.25 g, 3.375 g, and 4.5 g product, respectively. Consider an alternative formulation of piperacillin-tazobactam in patients requiring restricted sodium intake. Periodic electrolyte determinations should be performed in patients with low potassium reserves. ( 5.8 ) Clostridioides difficile -Associated Diarrhea: Evaluate patients if diarrhea occurs. ( 5.9 ) 5.1 Hypersensitivity Adverse Reactions Serious and occasionally fatal hypersensitivity (anaphylactic/anaphylactoid) reactions (including shock) have been reported in patients receiving therapy with piperacillin and tazobactam. These reactions are more likely to occur in individuals with a history of penicillin, cephalosporin, or carbapenem hypersensitivity or a history of sensitivity to multiple allergens. Before initiating therapy with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection, careful inquiry should be made concerning previous hypersensitivity reactions. If an allergic reaction occurs, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should be discontinued and appropriate therapy instituted. 5.2 Severe Cutaneous Adverse Reactions Piperacillin and tazobactam may cause severe cutaneous adverse reactions, such as Stevens-Johnson syndrome, toxic epidermal necrolysis, drug reaction with eosinophilia and systemic symptoms, and acute generalized exanthematous pustulosis. If patients develop a skin rash they should be monitored closely and Piperacillin and Tazobactam for Injection and Sodium Chloride Injection discontinued if lesions progress. 5.3 Hemophagocytic Lymphohistiocytosis Cases of hemophagocytic lymphohistiocytosis (HLH) have been reported in pediatric and adult patients treated with piperacillin and tazobactam. Signs and symptoms of HLH may include fever, rash, lymphadenopathy, hepatosplenomegaly and cytopenia. If HLH is suspected, discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection immediately and institute appropriate management. 5.4 Rhabdomyolysis Rhabdomyolysis has been reported with the use of piperacillin and tazobactam [see Adverse Reactions (6.2) ] . If signs or symptoms of rhabdomyolysis such as muscle pain, tenderness or weakness, dark urine, or elevated creatine phosphokinase are observed, discontinue Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and initiate appropriate therapy. 5.5 Hematologic Adverse Reactions Bleeding manifestations have occurred in some patients receiving beta-lactam drugs, including piperacillin. These reactions have sometimes been associated with abnormalities of coagulation tests such as clotting time, platelet aggregation and prothrombin time, and are more likely to occur in patients with renal failure. If bleeding manifestations occur, Piperacillin and Tazobactam for Injection and Sodium Chloride Injection should be discontinued, and appropriate therapy instituted. The leukopenia/neutropenia associated with piperacillin and tazobactam administration appears to be reversible and most frequently associated with prolonged administration. Periodic assessment of hematopoietic function should be performed, especially with prolonged therapy, i.e., ≥ 21 days [see Adverse Reactions (6.1) ]. 5.6 Central Nervous System Adverse Reactions As with other penicillins, piperacillin and tazobactam may cause neuromuscular excitability or seizures. Patients receiving higher doses, especially patients with renal impairment may be at greater risk for central nervous system adverse reactions. Closely monitor patients with renal impairment or seizure disorders for signs and symptoms of neuromuscular excitability or seizures [see Adverse Reactions (6.2) ]. 5.7 Nephrotoxicity in Critically Ill Patients The use of piperacillin and tazobactam was found to be an independent risk factor for renal failure and was associated with delayed recovery of renal function as compared to other beta-lactam antibacterial drugs in a randomized, multicenter, controlled trial in critically ill patients [see Adverse Reactions (6.1) ]. Based on this study, alternative treatment options should be considered in the critically ill population. If alternative treatment options are inadequate or unavailable, monitor renal function during treatment with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection [see Dosage and Administration (2.4) ] . Combined use of piperacillin and tazobactam and vancomycin may be associated with an increased incidence of acute kidney injury [see Drug Interactions (7.3) ]. 5.8 High Sodium Load and Electrolyte Effects Piperacillin and Tazobactam for Injection and Sodium Chloride Injection contains a total of 220 mg, 256 mg, and 440 mg of sodium per 2.25 g, 3.375 g, and 4.5 g product, respectively. Consider using an alternative formulation of piperacillin and tazobactam when treating patients requiring restricted salt intake. Periodic electrolyte determinations should be performed in patients with low potassium reserves, and the possibility of hypokalemia should be kept in mind with patients who have potentially low potassium reserves and who are receiving cytotoxic therapy or diuretics. 5.9 Clostridioides difficile- Associated Diarrhea Clostridioides difficile -associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including piperacillin and tazobactam, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile . C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibacterial drug use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents. If CDAD is suspected or confirmed, ongoing antibacterial drug use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibacterial treatment of C. difficile , and surgical evaluation should be instituted as clinically indicated. 5.10 Development of Drug-Resistant Bacteria Prescribing Piperacillin and Tazobactam for Injection and Sodium Chloride Injection in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of development of drug-resistant bacteria.
Contraindications

Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is contraindicated in patients with a history of allergic reactions to any of the penicillins, cephalosporins, or betalactamase inhibitors. Patients with a history of allergic reactions to any of the penicillins, cephalosporins, or beta-lactamase inhibitors. ( 4 )

Adverse Reactions

The following clinically significant adverse reactions are described elsewhere in the labeling: Hypersensitivity Adverse Reactions [see Warnings and Precautions (5.1) ] Severe Cutaneous Adverse Reactions [see Warnings and Precautions (5.2) ] Hemophagocytic Lymphohistiocytosis [see Warnings and Precautions (5.3) ] Rhabdomyolysis [see Warnings and Precautions (5.4) ] Hematologic Adverse Reactions [see Warnings and Precautions (5.5) ] Central Nervous System Adverse Reactions [see Warnings and Precautions (5.6) ] Nephrotoxicity in Critically Ill Patients [see Warnings and Precautions (5.7) ] High Sodium Load and Electrolyte Effects [see Warnings and Precautions (5.8) ] Clostridioides difficile -Associated Diarrhea [see Warnings and Precautions (5.9) ] The most common adverse reactions (incidence >5%) are diarrhea, constipation, nausea, headache, and insomnia. ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact B. Braun Medical Inc. at 1-833-425-1464 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. The safety of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection has been established from adequate and well-controlled studies of piperacillin and tazobactam. Below is a display of the adverse reactions of piperacillin and tazobactam in these adequate and well controlled studies. Clinical Trials in Adult Patients During the initial clinical investigations, 2621 patients worldwide were treated with piperacillin and tazobactam in phase 3 trials. In the key North American monotherapy clinical trials (n=830 patients), 90% of the adverse events reported were mild to moderate in severity and transient in nature. However, in 3.2% of the patients treated worldwide, piperacillin and tazobactam was discontinued because of adverse events primarily involving the skin (1.3%), including rash and pruritus; the gastrointestinal system (0.9%), including diarrhea, nausea, and vomiting; and allergic reactions (0.5%). Table 4: Adverse Reactions from Piperacillin and Tazobactam Monotherapy Clinical Trials System Organ Class Adverse Reaction Gastrointestinal disorders Diarrhea (11.3%) Constipation (7.7%) Nausea (6.9%) Vomiting (3.3%) Dyspepsia (3.3%) Abdominal pain (1.3%) General disorders and administration site conditions Fever (2.4%) Injection site reaction (≤1%) Rigors (≤1%) Immune system disorders Anaphylaxis (≤1%) Infections and infestations Candidiasis (1.6%) Pseudomembranous colitis (≤1%) Metabolism and nutrition disorders Hypoglycemia (≤1%) Musculoskeletal and connective tissue disorders Myalgia (≤1%) Arthralgia (≤1%) Nervous system disorders Headache (7.7%) Psychiatric disorders Insomnia (6.6%) Skin and subcutaneous tissue disorders Rash (4.2%, including maculopapular, bullous, and urticarial) Pruritus (3.1%) Purpura (≤1%) Vascular disorders Phlebitis (1.3%) Thrombophlebitis (≤1%) Hypotension (≤1%) Flushing (≤1%) Respiratory, thoracic and mediastinal disorders Epistaxis (≤1%) Nosocomial Pneumonia Trials Two trials of nosocomial lower respiratory tract infections were conducted. In one study, 222 patients were treated with piperacillin and tazobactam in a dosing regimen of 4.5 g every 6 hours in combination with an aminoglycoside and 215 patients were treated with imipenem/cilastatin (500 mg/500 mg every 6 hours) in combination with an aminoglycoside. In this trial, treatment-emergent adverse events were reported by 402 patients, 204 (91.9%) in the piperacillin and tazobactam group and 198 (92.1%) in the imipenem/cilastatin group. Twenty-five (11.0%) patients in the piperacillin and tazobactam group and 14 (6.5%) in the imipenem/cilastatin group (p > 0.05) discontinued treatment due to an adverse event. The second trial used a dosing regimen of 3.375 g given every 4 hours with an aminoglycoside. Table 5: Adverse Reactions from Piperacillin and Tazobactam Plus Aminoglycoside Clinical Trials For adverse drug reactions that appeared in both studies the higher frequency is presented. System Organ Class Adverse Reaction Blood and lymphatic system disorders Thrombocythemia (1.4%) Anemia (≤1%) Thrombocytopenia (≤1%) Eosinophilia (≤1%) Gastrointestinal disorders Diarrhea (20%) Constipation (8.4%) Nausea (5.8%) Vomiting (2.7%) Dyspepsia (1.9%) Abdominal pain (1.8%) Stomatitis (≤1%) General disorders and administration site conditions Fever (3.2%) Injection site reaction (≤1%) Infections and infestations Oral candidiasis (3.9%) Candidiasis (1.8%) Investigations BUN increased (1.8%) Blood creatinine increased (1.8%) Liver function test abnormal (1.4%) Alkaline phosphatase increased (≤1%) Aspartate aminotransferase increased (≤1%) Alanine aminotransferase increased (≤1%) Metabolism and nutrition disorders Hypoglycemia (≤1%) Hypokalemia (≤1%) Nervous system disorders Headache (4.5%) Psychiatric disorders Insomnia (4.5%) Renal and urinary disorders Renal failure (≤1%) Skin and subcutaneous tissue disorders Rash (3.9%) Pruritus (3.2%) Vascular disorders Thrombophlebitis (1.3%) Hypotension (1.3%) Other Trials: Nephrotoxicity In a randomized, multicenter, controlled trial in 1200 adult critically ill patients, piperacillin and tazobactam was found to be a risk factor for renal failure (odds ratio 1.7, 95% CI 1.18 to 2.43), and associated with delayed recovery of renal function as compared to other beta-lactam antibacterial drugs 1 [see Warnings and Precautions (5.7) ]. Adverse Laboratory Changes (Seen During Clinical Trials) Of the trials reported, including that of nosocomial lower respiratory tract infections in which a higher dose of piperacillin and tazobactam was used in combination with an aminoglycoside, changes in laboratory parameters include: Hematologic —decreases in hemoglobin and hematocrit, thrombocytopenia, increases in platelet count, eosinophilia, leukopenia, neutropenia. These patients were withdrawn from therapy; some had accompanying systemic symptoms (e.g., fever, rigors, chills) Coagulation —positive direct Coombs' test, prolonged prothrombin time, prolonged partial thromboplastin time Hepatic —transient elevations of AST (SGOT), ALT (SGPT), alkaline phosphatase, bilirubin Renal —increases in serum creatinine, blood urea nitrogen Additional laboratory events include abnormalities in electrolytes (i.e., increases and decreases in sodium, potassium, and calcium), hyperglycemia, decreases in total protein or albumin, blood glucose decreased, gamma-glutamyltransferase increased, hypokalemia, and bleeding time prolonged. Clinical Trials in Pediatric Patients Clinical studies of piperacillin and tazobactam in pediatric patients suggest a similar safety profile to that seen in adults. In a prospective, randomized, comparative, open-label clinical trial of pediatric patients, 2 to 12 years of age, with intra-abdominal infections (including appendicitis and/or peritonitis), 273 patients were treated with piperacillin and tazobactam 112.5 mg/kg given intravenously every 8 hours and 269 patients were treated with cefotaxime (50 mg/kg) plus metronidazole (7.5 mg/kg) every 8 hours. In this trial, adverse reactions were reported by 146 patients, 73 (26.7%) in the piperacillin and tazobactam group and 73 (27.1%) in the cefotaxime/metronidazole group. Six patients (2.2%) in the piperacillin and tazobactam group and 5 patients (1.9%) in the cefotaxime/metronidazole group discontinued due to an adverse event. In a retrospective, cohort study, 140 pediatric patients 2 months to less than 18 years of age with nosocomial pneumonia were treated with piperacillin and tazobactam and 267 patients were treated with comparators (which included ticarcillin-clavulanate, carbapenems, ceftazidime, cefepime, or ciprofloxacin). The rates of serious adverse reactions were generally similar between the piperacillin and tazobactam and comparator groups, including patients aged 2 months to 9 months treated with piperacillin and tazobactam 90 mg/kg intravenously every 6 hours and patients older than 9 months and less than 18 years of age treated with piperacillin and tazobactam 112.5 mg/kg intravenously every 6 hours. 6.2 Postmarketing Experience In addition to the adverse drug reactions identified in clinical trials in Table 4 and Table 5, the following adverse reactions have been identified during post-approval use of piperacillin and tazobactam. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. Hepatobiliary —hepatitis, jaundice Hematologic —hemolytic anemia, agranulocytosis, pancytopenia Immune —hypersensitivity reactions, anaphylactic/anaphylactoid reactions (including shock), hemophagocytic lymphohistiocytosis (HLH), acute myocardial ischemia with or without myocardial infarction may occur as part of an allergic reaction Renal —interstitial nephritis Nervous system disorders —seizures Psychiatric disorders —delirium Respiratory —eosinophilic pneumonia Skin and Appendages —erythema multiforme, Stevens-Johnson syndrome, toxic epidermal necrolysis, drug reaction with eosinophilia and systemic symptoms, (DRESS), acute generalized exanthematous pustulosis (AGEP), dermatitis exfoliative, and linear IgA bullous dermatosis Musculoskeletal —rhabdomyolysis Postmarketing experience with piperacillin and tazobactam in pediatric patients suggests a similar safety profile to that seen in adults. 6.3 Additional Experience with Piperacillin The following adverse reaction has also been reported for piperacillin for injection: Skeletal —prolonged neuromuscular blockade [see Drug Interactions (7.5) ].

Drug Interactions

Piperacillin and Tazobactam for Injection and Sodium Chloride Injection administration can significantly reduce tobramycin concentrations in hemodialysis patients. Monitor tobramycin concentrations in these patients. ( 7.1 ) Probenecid prolongs the half-lives of piperacillin and tazobactam and should not be co-administered with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection unless the benefit outweighs the risk. ( 7.2 ) Co-administration of Piperacillin and Tazobactam for Injection and Sodium Chloride Injection with vancomycin may increase the incidence of acute kidney injury. Monitor kidney function in patients receiving Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and vancomycin. ( 7.3 ) Monitor coagulation parameters in patients receiving Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and heparin or oral anticoagulants. ( 7.4 ) Piperacillin and Tazobactam for Injection and Sodium Chloride Injection may prolong the neuromuscular blockade of vecuronium and other non-depolarizing neuromuscular blockers. Monitor for adverse reactions related to neuromuscular blockade. ( 7.5 ) 7.1 Aminoglycosides Piperacillin may inactivate aminoglycosides by converting them to microbiologically inert amides. In vivo inactivation : When aminoglycosides are administered in conjunction with piperacillin to patients with end-stage renal disease requiring hemodialysis, the concentrations of the aminoglycosides (especially tobramycin) may be significantly reduced and should be monitored. Sequential administration of piperacillin and tazobactam and tobramycin to patients with either normal renal function or mild to moderate renal impairment has been shown to modestly decrease serum concentrations of tobramycin but no dosage adjustment is considered necessary. In vitro inactivation : Due to the in vitro inactivation of aminoglycosides by piperacillin, piperacillin and tazobactam and aminoglycosides are recommended for separate administration. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and aminoglycosides should be reconstituted, and administered separately when concomitant therapy with aminoglycosides is indicated. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection, which contains EDTA, is compatible with amikacin and gentamicin for simultaneous Y-site infusion in certain diluents and at specific concentrations. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection is not compatible with tobramycin for simultaneous Y-site infusion [see Dosage and Administration (2.7) ]. 7.2 Probenecid Probenecid administered concomitantly with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection prolongs the half-life of piperacillin by 21% and that of tazobactam by 71% because probenecid inhibits tubular renal secretion of both piperacillin and tazobactam. Probenecid should not be co-administered with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection unless the benefit outweighs the risk. 7.3 Vancomycin Studies have detected an increased incidence of acute kidney injury in patients concomitantly administered piperacillin and tazobactam and vancomycin as compared to vancomycin alone [see Warnings and Precautions (5.7) ]. Monitor kidney function in patients concomitantly administered with Piperacillin and Tazobactam for Injection and Sodium Chloride Injection and vancomycin. No pharmacokinetic interactions have been noted between piperacillin and tazobactam and vancomycin. 7.4 Anticoagulants Coagulation parameters should be tested more frequently and monitored regularly during simultaneous administration of high doses of heparin, oral anticoagulants, or other drugs that may affect the blood coagulation system or the thrombocyte function [see Warnings and Precautions (5.5) ]. 7.5 Vecuronium Piperacillin when used concomitantly with vecuronium has been implicated in the prolongation of the neuromuscular blockade of vecuronium. Piperacillin and Tazobactam for Injection and Sodium Chloride Injection could produce the same phenomenon if given along with vecuronium. Due to their similar mechanism of action, it is expected that the neuromuscular blockade produced by any of the non-depolarizing neuromuscular blockers could be prolonged in the presence of piperacillin. Monitor for adverse reactions related to neuromuscular blockade (see package insert for vecuronium bromide). 7.6 Methotrexate Limited data suggests that co-administration of methotrexate and piperacillin may reduce the clearance of methotrexate due to competition for renal secretion. The impact of tazobactam on the elimination of methotrexate has not been evaluated. If concurrent therapy is necessary, serum concentrations of methotrexate as well as the signs and symptoms of methotrexate toxicity should be frequently monitored. 7.7 Effects on Laboratory Tests There have been reports of positive test results using the Bio-Rad Laboratories Platelia Aspergillus EIA test in patients receiving piperacillin and tazobactam injection who were subsequently found to be free of Aspergillus infection. Cross-reactions with non-Aspergillus polysaccharides and polyfuranoses with the Bio-Rad Laboratories Platelia Aspergillus EIA test have been reported. Therefore, positive test results in patients receiving piperacillin and tazobactam should be interpreted cautiously and confirmed by other diagnostic methods. As with other penicillins, the administration of piperacillin and tazobactam may result in a false-positive reaction for glucose in the urine using a copper-reduction method (CLINITEST ® ). It is recommended that glucose tests based on enzymatic glucose oxidase reactions be used.


Similar Drugs

Related medications based on brand, generic name, substance, active ingredients.

View all similar drugs →