Drugs Similar to TOBRAMYCIN

Tobramycin ophthalmic solution, USP 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of tobramycin ophthalmic solution, USP 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and purified water. Tobramycin ophthalmic solution, USP 0.3% has a pH range between 7.0 and 8.0 and an osmolality of 260-320 mOsm/kg. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram-negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: MW=467.52 Molecular Formula: C 18 H 37 N 5 O 9 Chemical Name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl-(1→4)} -0- {2,6-diamino-2,3,6-trideoxy-α-D-ribohexopyranosyl-(1→6) }-2-deoxystreptamine. chemical

Tobramycin Sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 10 mg (pediatric) or 40 mg tobramycin; sodium metabisulfite added as an antioxidant 3 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH 4.0 (3.0 to 6.5). Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine sulfate (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.45. The structural formula for tobramycin is as follows: structural formula tobramycin sulfate

Tobramycin inhalation solution, USP is a sterile, clear, colorless to yellow, non-pyrogenic, aqueous solution with pH and salinity adjusted. Tobramycin inhalation solution, USP is administered by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C 18 H 37 N 5 O 9 and the molecular weight is 467.51. Tobramycin, USP is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin, USP is: Each single-dose 4 mL ampule of tobramycin inhalation solution, USP contains one 300 mg dose of tobramycin, USP with sodium chloride and trisodium citrate dihydrate in sterile water for injection. Sulfuric acid and sodium hydroxide are used, as needed, to adjust the pH to 5.0. Nitrogen is used for sparging and filling. The formulation contains no preservatives. 1

Tobramycin ophthalmic solution USP, 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL contains: Active: tobramycin 3 mg (0.3%). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol and purified water. Sodium hydroxide and/or sulfuric acid (to adjust pH). Tobramycin ophthalmic solution, 0.3% has a pH range between 7.0 and 8.0. Preservative: benzalkonium chloride 0.1 mg (0.01%). Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram-negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Chemical name: (2S,3R,4S,5S,6R)-4-amino-2-[(1S,2S,3R,4S,6R)-4,6-diamino-3-[(2R,3R,5S,6R)-3-amino-6-(aminomethyl)-5-hydroxyoxan-2-yl]oxy-2-hydroxycyclohexyl]oxy-6-(hydroxymethyl)oxane-3,5-diol chem

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment (3.0 to 6.5). Tobramycin sulfate is, O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4) - O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.42. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion or to the filling of empty sterile syringes for intravenous injection for patients with individualized dosing requirements. FURTHER DILUTION IS REQUIRED BEFORE USE (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package ). tobra-struc-01.jpg

Tobramycin ophthalmic solution is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of Tobramycin ophthalmic solution USP, 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: Benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and water for injection. Tobramycin ophthalmic solution has a pH range between 7.0 and 8.0 and an osmolality of 260-320 mOsm/kg. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram-negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Molecular Weight = 467.52 Molecular Formula: C 18 H 37 N 5 O 9 Chemical name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl-(1→4) }-0-{2,6-diamino-2,3,6-trideoxy-α-D-ribohexo-pyranosyl-(1→6) }-2-deoxystreptamine. Molecular Formula

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin inhalation solution, USP is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C 18 H 37 N 5 O 9 and the molecular weight is 467.52. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is: Each single-dose 5 mL ampule contains 300 mg tobramycin and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives. Structural Formula for Tobramycin

Tobramycin Ophthalmic Solution USP, 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of Tobramycin Ophthalmic Solution USP, 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and purified water. Tobramycin Ophthalmic Solution USP, 0.3% has a pH range between 7.0 and 8.0. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram-negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: [chemical] MW=467.2 Molecular Formula C18H37N5O9 Chemical name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl-(1→4)} -0- {2,6-diamino-2,3,6-trideoxy-α-D-ribohexopyranosyl-(1→6) }-2-deoxystreptamine.

Tobramycin ophthalmic solution 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of Tobramycin ophthalmic solution USP, 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and water for injection. Tobramycin ophthalmic solution 0.3% has a pH range between 7.0 and 8.0 and an osmolality of 260-320 mOsm/kg. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram- negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Molecular Weight = 467.52 Molecular Formula: C 18 H 37 N 5 O 9 Chemical Name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl (1→4) }-0-{2,6-diamino-2,3,6-trideoxy α-D-ribohexo-pyranosyl-(1→6) }-2 deoxystreptamine. Image

Tobramycin inhalation solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C 18 H 37 N 5 O 9 and the molecular weight is 467.51. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is: Each single-dose 5 mL ampule contains 300 mg tobramycin, USP and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives. tobramycin-structure.jpg

Tobramycin ophthalmic solution 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of Tobramycin ophthalmic solution USP, 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and water for injection. Tobramycin ophthalmic solution 0.3% has a pH range between 7.0 and 8.0 and an osmolality of 260-320 mOsm/kg. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram- negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Molecular Weight = 467.52 Molecular Formula: C 18 H 37 N 5 O 9 Chemical Name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl (1→4) }-0-{2,6-diamino-2,3,6-trideoxy α-D-ribohexo-pyranosyl-(1→6) }-2 deoxystreptamine. Image

Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4 . The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows: Figure 2: Tobramycin Structure Figure 2: Tobramycin Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH 4.0 (3.0 to 6.5). Tobramycin sulfate is O -3-amino-3-deoxy- α -D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy- α -D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package ). tobramycin-spl-structure

Tobramycin Inhalation Solution, USP is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin, USP is C 18 H 37 N 5 O 9 and the molecular weight is 467.52 g/mol. Tobramycin, USP is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin, USP is: Each single-dose 5 mL ampule contains 300 mg tobramycin, USP and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives. Structural Formula

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin ophthalmic solution USP, 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL contains: Active: tobramycin 3 mg (0.3%). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol and purified water. Sodium hydroxide and/or sulfuric acid (to adjust pH). Tobramycin ophthalmic solution, 0.3% has a pH range between 7.0 and 8.0. Preservative: benzalkonium chloride 0.1 mg (0.01%). Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram-negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Chemical name: (2S,3R,4S,5S,6R)-4-amino-2-[(1S,2S,3R,4S,6R)-4,6-diamino-3-[(2R,3R,5S,6R)-3-amino-6-(aminomethyl)-5-hydroxyoxan-2-yl]oxy-2-hydroxycyclohexyl]oxy-6-(hydroxymethyl)oxane-3,5-diol chem

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol 5 mg; sodium metabisulfite 3.2 mg; 0.1 mg edetate disodium and water for injection, q.s. Sulfuric acid and/or sodium hydroxide may have been added to adjust the pH (3.0 to 6.5). Each mL of tobramycin (40 mg/mL) contains 0.78 mg (0.034 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5 H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: image-description

Tobramycin inhalation solution, USP is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. Tobramycin USP is a white or almost white powder. The chemical formula for tobramycin is C 18 H 37 N 5 O 9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-­trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is: Each single-dose 5 mL ampule contains 300 mg tobramycin USP and 11.25 mg sodium chloride in water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives. Chemical Structure

Tobramycin ophthalmic solution 0.3% is a sterile topical ophthalmic antibiotic formulation prepared specifically for topical therapy of external ophthalmic infections. Each mL of Tobramycin ophthalmic solution USP, 0.3% contains: Active: tobramycin 0.3% (3 mg). Preservative: benzalkonium chloride 0.01% (0.1 mg). Inactives: boric acid, sodium sulfate, sodium chloride, tyloxapol, sodium hydroxide and/or sulfuric acid (to adjust pH) and water for injection. Tobramycin ophthalmic solution 0.3% has a pH range between 7.0 and 8.0 and an osmolality of 260-320 mOsm/kg. Tobramycin is a water-soluble aminoglycoside antibiotic active against a wide variety of gram- negative and gram-positive ophthalmic pathogens. The chemical structure of tobramycin is: Molecular Weight = 467.52 Molecular Formula: C 18 H 37 N 5 O 9 Chemical Name: 0-{3-amino-3-deoxy-α-D-gluco-pyranosyl (1→4) }-0-{2,6-diamino-2,3,6-trideoxy α-D-ribohexo-pyranosyl-(1→6) }-2 deoxystreptamine. Image

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 10 mg (pediatric) or 40 mg tobramycin; phenol added as preservative, 5 mg; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate sodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment (3.0 to 6.5). Each mL of tobramycin (10 mg/mL or 40 mg/mL) contains 0.78 mg (0.034 mEq) of sodium. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy- α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.42. The structural formula for tobramycin is as follows: Structural Formula for Tobramycin

Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4 . The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows: Figure 2: Tobramycin Structure Structural Formula

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment (3.0 to 6.5). Tobramycin sulfate is, O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4) - O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.42. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion or to the filling of empty sterile syringes for intravenous injection for patients with individualized dosing requirements. FURTHER DILUTION IS REQUIRED BEFORE USE (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package ). tobra-struc-01.jpg

Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4 . The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows: Figure 2: Tobramycin Structure Figure 2: Tobramycin Structure

Tobramycin Sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 10 mg (pediatric) or 40 mg tobramycin; sodium metabisulfite added as an antioxidant 3 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH 4.0 (3.0 to 6.5). Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine sulfate (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.45. The structural formula for tobramycin is as follows: structural formula tobramycin sulfate

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol 5 mg; sodium metabisulfite 3.2 mg; 0.1 mg edetate disodium and water for injection, q.s. Sulfuric acid and/or sodium hydroxide may have been added to adjust the pH (3.0 to 6.5). Each mL of tobramycin (40 mg/mL) contains 0.78 mg (0.034 mEq) of sodium. Tobramycin sulfate is, O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5 H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: image-description

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment (3.0 to 6.5). Tobramycin sulfate is, O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4) - O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.42. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion or to the filling of empty sterile syringes for intravenous injection for patients with individualized dosing requirements. FURTHER DILUTION IS REQUIRED BEFORE USE (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package ). tobra-struc-01.jpg

Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4 . The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows: Figure 2: Tobramycin Structure Figure 2: Tobramycin Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH 4.0 (3.0 to 6.5). Tobramycin sulfate is O -3-amino-3-deoxy- α -D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy- α -D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package ). tobramycin-spl-structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin for injection, USP is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of sterile water for injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D- ribo -hexopyranosyl-(1→6)-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for Proper Use of Pharmacy Bulk Package ) . Image

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin for injection, USP is supplied as a sterile white to off-white lyophilized powder or cake and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH between 6.0 and 8.0. Each vial contains tobramycin sulfate equivalent to 1,200 mg of tobramycin, USP. After reconstitution, the solution will contain 40 mg of tobramycin, USP per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is, O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D -ribo- hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5) (salt) and has the molecular formula (C 18 H 37 N 5 O 9 )2•5H 2 SO 4 . The molecular weight is 1,425.45. The structural formula for tobramycin, USP is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). tobramycin-str

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 10 mg or 40 mg tobramycin for Tobramycin Injection USP, 10 mg/mL (Pediatric) or 40 mg/mL; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH 4.0 (3.0 to 6.5). Tobramycin sulfate is O -3-amino-3-deoxy- α -D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy- α -D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: tobramycin-spl-structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin Injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 10 mg (pediatric) or 40 mg tobramycin; phenol added as preservative, 5 mg; sodium metabisulfite added as an antioxidant, 3.2 mg; and edetate sodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment (3.0 to 6.5). Each mL of tobramycin (10 mg/mL or 40 mg/mL) contains 0.78 mg (0.034 mEq) of sodium. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy- α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.42. The structural formula for tobramycin is as follows: Structural Formula for Tobramycin

Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C 18 H 37 N 5 O 9 ) 2 •5H 2 SO 4 . The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows: Figure 2: Tobramycin Structure Structural Formula

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.39. The structural formula for tobramycin is as follows: A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION , Directions for proper use of Pharmacy Bulk Package ). Tobramycin-Structure

Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius . Tobramycin injection, USP is a clear and colorless sterile aqueous solution for parenteral administration. Each mL contains tobramycin sulfate equivalent to 40 mg tobramycin; phenol added as a preservative, 5 mg; sodium bisulfite added as an antioxidant, 3.2 mg; and edetate disodium added as a stabilizer, 0.1 mg. Contains sulfuric acid and may contain sodium hydroxide for pH adjustment. pH (3.0 to 6.5). Tobramycin 80 mg/2 mL vial contains 1.568 mg (0.0682 mEq) of sodium. Tobramycin 1.2 g/30 mL vial contains 23.52 mg (1.0226 mEq) of sodium. Tobramycin sulfate is, O -3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O -[2,6-diamino-2,3,6-trideoxy-α-D- ribo -hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the chemical formula (C 18 H 37 N 5 O 9 ) 2 • 5H 2 SO 4 . The molecular weight is 1,425.45. The structural formula for tobramycin is as follows: structural formula