Drugs Similar to PDI ALCOHOL PREP PAD STERILE LARGE AND MEDIUM

Uses instant healthcare personnel hand antiseptic to reduce bacteria that potentially can cause disease instant hand antiseptic to decrease bacteria on the skin recommended for repeated use

To decrease bacteria on the skin that could cause disease. Recommended for repeated use

Thoroughly cover your hands with product and allow to dry without wiping. Children under 6 years of age should be supervised when using this product. Not recommended for infants.

To decrease bacteria on the skin that could cause disease. Recommended for repeated use.

To decrease bacteria on the skin that could cause disease. Recommended for repeated use.

Use Health care personnel hand rub to help reduce bacteria that potentially can cause disease.

Use Health care personnel hand rub to help reduce bacteria that potentially can cause disease.

Use: For skin only. Do not ingest.

Uses Uses • Hand sanitizer to reduce microorganisms on the skin. • Use this product when soap and water are not available.

Uses For handwashing to decrease bacteria on skin

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Uses to decrease bacteria on the skin that could cause disease recommended for repeated use

Use For hand sanitizing to decrease bacteria on skin.

Use For hand sanitizing to decrease bacteria on skin.

Uses for handwashing to decrease bacteria on skin whenever soap and water handwashing is not readily available.

Use Helps reduce the amount of bacteria on skin

Uses • for hand sanitizing to decrease bacteria on skin when water and soap are not avaliable • recommended for repeated use

Uses ■ for hand sanitizing to decrease bacteria on the skin when water and soap are not available. ■ recommended for repeated use.

Uses ■ for hand sanitizing to decrease bacteria on the skin when water and soap are not available. ■ recommended for repeated use.

Uses to help reduce bacteria on skin.

Uses to help reduce bacteria on the skin.

Uses • for hand sanitizing to decrease bacteria on skin when water and soap are not avaliable • recommended for repeated use

Uses ■ for hand sanitizing to decrease bacteria on the skin when water and soap are not available. ■ recommended for repeated use.

Uses surgical hand antiseptic: significantly reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care healthcare personnel hand antiseptic: hand rub to help reduce bacteria that potentially can cause disease recommended for repeated use

Uses instant healthcare personnel hand antiseptic to reduce bacteria that potentially can cause disease instant hand antiseptic to decrease bacteria on the skin recommended for repeated use

To decrease bacteria on the skin that could cause disease. Recommended for repeated use

Thoroughly cover your hands with product and allow to dry without wiping. Children under 6 years of age should be supervised when using this product. Not recommended for infants.

Uses Hand sanitizer to help decrease bacteria on the skin.

For handwashing to decrease bacteria on the skin.

For handwashing to decrease bacteria on the skin.

To decrease bacteria on the skin that could cause disease. Recommended for repeated use.

To decrease bacteria on the skin that could cause disease. Recommended for repeated use.

Use Health care personnel hand rub to help reduce bacteria that potentially can cause disease.

Use Health care personnel hand rub to help reduce bacteria that potentially can cause disease.

Use: For skin only. Do not ingest.

Uses • Helps reduce bacteria on the skin.

Uses ■ for preparation of skin prior to injection

Uses • to decrease bacteria on fabrics, clothes, hands, skin & surfaces that could cause disease • for repeated use

Adrenalin ® (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL (1:1000) epinephrine, packaged as 1 mL of solution in a single-use clear glass vial or 30 mL of solution in a multiple-dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin ® solution contains 1 mg epinephrine, 9.0 mg sodium chloride, 1.0 mg sodium metabisulfite, hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin ® solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is: The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Chemical Structure

Dexamethasone sodium phosphate is a water-soluble inorganic ester of dexamethasone. It occurs as a white or slightly yellow crystalline powder, is odorless or has a slight odor of alcohol, is exceedingly hygroscopic and is freely soluble in water. Dexamethasone sodium phosphate is an adrenocortical steroid anti-inflammatory drug. Chemically, dexamethasone sodium phosphate is 9-Fluoro-11ß,17,21-trihydroxy-16α-methylpregna-1, 4-diene-3,20-dione 21-(dihydrogen phosphate) disodium salt and has the following structural formula: Dexamethasone Sodium Phosphate Injection, USP is a sterile solution of dexamethasone sodium phosphate in water for injection for intravenous (IV), intramuscular (IM), intra-articular, soft-tissue or intralesional use. Each mL contains dexamethasone sodium phosphate equivalent to dexamethasone phosphate 4 mg or dexamethasone 3.33 mg; benzyl alcohol 10 mg added as preservative; sodium citrate dihydrate 11 mg; sodium sulfite 1 mg as an antioxidant; Water for Injection q.s. Citric acid and/or sodium hydroxide may have been added for pH adjustment (7.0 to 8.5). Air in the container is displaced by nitrogen. structure-1 DESCRIPTION Bupivacaine hydrochloride is 2-Piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula: MARCAINE is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of MARCAINE may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. MARCAINE—Sterile isotonic solutions containing sodium chloride. In multiple-dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid. structure-2 DESCRIPTION Kenalog®-40 Injection (triamcinolone acetonide injectable suspension, USP) is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. structure-3

Use To help reduce bacteria on the skin.

Cyanocobalamin Injection (vitamin B 12 ) is a sterile solution of Cyanocobalamin. Each mL contains Cyanocobalamin 1000 mcg, sodium chloride 9 mg and benzyl alcohol 0.015 mL in water for injection. Hydrochloric acid and/or sodium hydroxide may have been added to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B 12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C 63 H 88 CoN 14 O 14 P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below. struct-1

USES for preparation of the skin prior to injection

Uses For preparation of the skin prior to an injection

Use (s) Hand sanitizer to help reduce bacteria that potentiallycan cause disease. For use when water and soap are not available.

Epinephrine Injection, USP 1 mg/mL is a sterile, nonpyrogenic solution. Each mL contains epinephrine 1 mg; sodium chloride 9 mg; sodium metabisulfite 0.9 mg added. May contain hydrochloric acid for pH adjustment. The solution contains no bacteriostat or antimicrobial agent. It is administered by the following routes: intravenous, intracardiac (left ventricular chamber), via endotracheal tube into the bronchial tree, subcutaneous or intramuscular. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula: Sodium Chloride, USP is chemically designated NaCl, a white, crystalline compound freely soluble in water. Structural Formula of Epinephrine

Uses first aid to help prevent the risk of infection in minor cuts, scrapes, and burns

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. image description DESCRIPTION Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H -pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1 . FIGURE 1 C 15 H 13 NO 3 • C 4 H 11 NO 3 Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for IM administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color. Figure 1

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. image description DESCRIPTION Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H -pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1 . FIGURE 1 C 15 H 13 NO 3 • C 4 H 11 NO 3 Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for IM administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color. Figure 1

Use Antiseptic skin cleanser to help reduce bacteria that potentially can cause disease. For use when soap and water are not available. For occasional and personal domestic use.

1 DESCRIPTION 4% Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing lidocaine hydrochloride, anhydrous 40 mg/mL in water for injection. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. pH 6.5 (5.0 to 7.0). Lidocaine has cardiac antiarrhythmic properties and is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-2′,6′-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula: structural formula lidocaine hydrochloride DESCRIPTION Bupivacaine hydrochloride is 2-Piperidinecarboxamide, 1-butyl- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula: Epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl] benzyl alcohol. It has the following structural formula: MARCAINE is available in sterile isotonic solutions with and without epinephrine (as bitartrate) 1:200,000 for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solutions of MARCAINE may be autoclaved if they do not contain epinephrine. Solutions are clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. MARCAINE —Sterile isotonic solutions containing sodium chloride. In multiple-dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid. MARCAINE with epinephrine 1:200,000 (as bitartrate)—Sterile isotonic solutions containing sodium chloride. Each mL contains bupivacaine hydrochloride and 0.0091 mg epinephrine bitartrate, with 0.5 mg sodium metabisulfite, 0.001 mL monothioglycerol, and 2 mg ascorbic acid as antioxidants, 0.0017 mL 60% sodium lactate buffer, and 0.1 mg edetate calcium disodium as stabilizer. In multiple-dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 3.4 and 4.5 with sodium hydroxide or hydrochloric acid. The specific gravity of MARCAINE 0.5% with epinephrine 1:200,000 (as bitartrate) at 25°C is 1.008 and at 37°C is 1.008. structural formula bupivacaine hydrochloride structural formula epinephrine

Use (s) Hand sanitizer to help reduce bacteria that potentially can cause disease. For use when water and soap are not available .

Use To help reduce bacteria on the skin.

Uses Use for preparation of the skin prior to an injection. Directions Apply topically as needed to clean intended area. Discard after single use.

Uses Hand sanitizer to decrease virus and bacteria on the skin that could cause disease Recommended for repetead use

Uses ■ for first aid to help prevent the risk of infection in minor cuts, scrapes and burns ■ for preparation of skin prior to injection