Drugs Similar to RISPERDAL CONSTA

PERSERIS contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1-yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.5 g/mol. The structural formula is: Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. PERSERIS is available as a sterile two-syringe mixing system: a liquid syringe prefilled with the delivery system (colorless to yellow solution), and a powder syringe prefilled with risperidone (white to yellow). PERSERIS for extended release injectable suspension, for subcutaneous use, is available in 90 mg and 120 mg risperidone strengths. The quantitative composition is provided below ( Table 6 ). Table 6 PERSERIS Constituted Product Delivered Mass *PLGH poly D,L(lactide co-glycolide); 80:20 molar ratio of lactide to glycolide Component PERSERIS 90 mg PERSERIS 120 mg Risperidone 90 mg 120 mg PLGH* 228 mg 304 mg N -methyl-pyrrolidine 282 mg 376 mg Total mass 600 mg 800 mg Total volume 0.6 mL 0.8 mL Structural Formula

RISPERDAL ® contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. RISPERDAL ® Tablets are for oral administration and available in 0.5 mg (red-brown), 1 mg (white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. RISPERDAL tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and starch (corn). The 0.5 mg, 2 mg, 3 mg, and 4 mg tablets also contain talc and titanium dioxide. The 0.5 mg tablets contain red iron oxide; the 2 mg tablets contain FD&C Yellow No. 6 Aluminum Lake; the 3 mg and 4 mg tablets contain D&C Yellow No. 10; the 4 mg tablets contain FD&C Blue No. 2 Aluminum Lake. RISPERDAL is also available as a 1 mg/mL oral solution. RISPERDAL ® Oral Solution contains the following inactive ingredients: tartaric acid, benzoic acid, sodium hydroxide, and purified water. RISPERDAL ® M-TAB ® Orally Disintegrating Tablets are available in 0.5 mg (light coral), 1 mg (light coral), 2 mg (coral), 3 mg (coral), and 4 mg (coral) strengths. RISPERDAL M-TAB Orally Disintegrating Tablets contain the following inactive ingredients: Amberlite ® resin, gelatin, mannitol, glycine, simethicone, carbomer, sodium hydroxide, aspartame, red ferric oxide, and peppermint oil. In addition, the 2 mg, 3 mg, and 4 mg RISPERDAL M-TAB Orally Disintegrating Tablets contain xanthan gum. Chemical Structure

Risperidone tablets, USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets, USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red. structure

Risperidone tablets USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red. structure

Risperidone tablets, USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets, USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red. structure

Risperidone Tablets contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone, USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Each risperidone tablet intended for oral administration contains 0.25 mg or 0.5 mg or 1 mg or 2 mg or 3 mg or 4 mg of risperidone. Additionally each tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and titanium dioxide. Additionally each 0.25 mg tablet contains iron oxide red and iron oxide yellow, 0.5 mg tablet contains iron oxide red, 2 mg tablet contains FD&C yellow # 6/sunset yellow FCF aluminum lake, 3 mg tablet contains D&C yellow # 10 aluminum lake and 4 mg tablet contains D&C yellow # 10 aluminum lake and FD&C blue # 2/ indigo carmine aluminum lake. Image

Risperidone tablets, USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets, USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red. structure

Risperidone Orally Disintegrating Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCI. Risperidone Orally Disintegrating Tablets, USP are available in 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg and 4 mg strengths and are white in color. Risperidone Orally Disintegrating Tablets, USP contain the following inactive ingredients: aspartame, croscarmellose sodium, crospovidone, magnesium stearate, maltodextrin, mannitol, methacrylic acid polymer with divinylbenzene, modified food starch, silicon dioxide, sorbitol, talc, tartaric acid, and natural grapefruit flavor. This product meets USP Disintegration Test 2. risperidone-orally-disintegrating-tablet-7.jpg

Risperidone, USP is an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone, USP is a white to almost white powder. It is soluble in methylene chloride, sparingly soluble in alcohol and practically insoluble in water. Risperidone Orally Disintegrating Tablets, USP are available in 0.5 mg (yellow), 1 mg (white), 2 mg (blue), 3 mg (orange), and 4 mg (pink) strengths. Risperidone Orally Disintegrating Tablets, USP contain the following inactive ingredients: acesulfame potassium, amino methacrylate copolymer, aspartame, colloidal silicon dioxide, low substituted hydroxypropyl cellulose, magnesium aluminometasilicate, mannitol, peppermint flavor, sodium chloride, sodium lauryl sulfate, sodium stearyl fumarate and talc. In addition, 0.5 mg strength contains ferric oxide yellow, 2 mg strength contains FD&C Blue #1 Aluminum lake, 3 mg strength contains FD&C Yellow #6 Aluminum lake, and 4 mg strength contains ferric oxide red. risperidone

Risperidone tablets, USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets, USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red.

Risperidone oral solution contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)- 1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone is also available as a 1 mg/mL oral solution. Risperidone Oral Solution contains the following inactive ingredients: benzoic acid, sodium hydroxide, sorbitol solution, tartaric acid, and purified water.

Risperidone tablets, USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets, USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red.

Risperidone contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone Tablets are for oral administration and available in 0.5 mg (red-brown), 1 mg (white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and starch (corn). The 0.5 mg, 2 mg, 3 mg, and 4 mg tablets also contain talc and titanium dioxide. The 0.5 mg tablets contain red iron oxide; the 2 mg tablets contain FD&C Yellow No. 6 Aluminum Lake; the 3 mg and 4 mg tablets contain D&C Yellow No. 10; the 4 mg tablets contain FD&C Blue No. 2 Aluminum Lake. Risperidone is also available as a 1 mg/mL Oral Solution. Risperidone Oral Solution contains the following inactive ingredients: tartaric acid, benzoic acid, sodium hydroxide, and purified water. Risperidone Orally Disintegrating Tablets are available in 0.5 mg (light coral), 1 mg (light coral), 2 mg (coral), 3 mg (coral), and 4 mg (coral) strengths. Risperidone Orally Disintegrating Tablets contain the following inactive ingredients: Amberlite ® resin, gelatin, mannitol, glycine, simethicone, carbomer, sodium hydroxide, aspartame, red ferric oxide, and peppermint oil. In addition, the 2 mg, 3 mg, and 4 mg Risperidone Orally Disintegrating Tablets contain xanthan gum. Chemical Structure

Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.48. The structural formula is: Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake. structure

Risperidone tablets USP contain risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2- benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets USP are for oral administration and available in 0.25 mg (orange), 0.5 mg (orange), 1 mg (white), 2 mg (yellow), 3 mg (orange), and 4 mg (brown) strengths. Risperidone tablets contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol (except 1 mg), sodium lauryl sulphate, sodium starch glycolate and polyethylene glycol (1 mg). Tablets of 0.25 mg, 0.5 mg, 2 mg, 3 mg, and 4 mg also contain talc and titanium dioxide. 0.25 mg, 0.5 mg, and 3 mg tablets contain FD&C Yellow # 6 aluminum lake, the 2 mg tablets contain yellow iron oxide; the 4 mg tablets contain iron oxide red. structure

Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&C yellow #6. image description

Risperidone tablets, USP contains risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.48. The structural formula is: Risperidone, USP is a white to almost white powder. Soluble in methylene dichloride, sparingly soluble in alcohol It is practically insoluble in water. Risperidone tablets, USP are for oral administration and available in 0.25 mg (yellow), 0.5 mg (brown), 1 mg (white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. Risperidone tablets contain the following inactive ingredients: lactose anhydrous, NF, microcrystalline cellulose, NF, magnesium stearate, NF, and pregelatinized starch, NF. Tablets of 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, and 4 mg also contain hypromellose and macrogol. The 0.25 mg tablets contain D&C Yellow #10 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Ferrosoferric Oxide, Iron Oxide Yellow and Titanium Dioxide; 0.5 mg tablets contain Iron Oxide Red and Titanium Dioxide; 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and Titanium Dioxide; the 3 mg and 4 mg tablets contain FD&C Yellow #5 Aluminum Lake and Titanium Dioxide; the 3 mg tablets contain FD&C Blue #2 Aluminum Lake and the 4 mg tablets contain FD&C Blue #1 Aluminum Lake. 1

Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, sparingly soluble in alcohol. It dissolves in dilute acid solutions. Risperidone Tablets, USP are available in 0.25 mg (dark yellow), 0.5 mg (Reddish brown), 1 mg (white) strengths, 2 mg (pink), 3 mg (yellow) and 4 mg (green) strengths. Each tablet for oral administration contains the following inactive ingredients: Anhydrous Lactose, Sodium Lauryl Sulfate, Microcrystalline Cellulose (101), Colloidal Silicon Dioxide, Sodium Starch Glycolate (Type A), Magnesium Stearate, HPMC 2910/ Hypromellose, Macrogol/ PEG (MW 400), Macrogol/ PEG (MW 8000), Titanium Dioxide. Also, the tablet contains Polyvinyl Alcohol Part Hydrolyzed (used for 0.25, 0.5, 2, 3, 4 mg tablets), Macrogol/ PEG (MW 3350) (used for 0.25, 0.5, 2, 3, 4 mg tablets), Talc (used for 0.25, 0.5, 2, 3, 4 mg tablets), D&C Yellow #10 Aluminium Lake (used for 0.25, 4 mg tablets), FD&C Yellow #6/ Sunset Yellow FCF Aluminium Lake (used for 0.25, 2, 4 mg tablets), Iron Oxide Red (used for 0.5 mg tablets), Lactose Monohydrate, Triacetin & Stearic Acid (used for 1 mg tablets), FD&C Red #40/Allura Red AC Aluminum Lake (used for 2 mg tablets) , Iron Oxide Yellow (used for 3 mg tablets) and FD&C Blue #1/ Brilliant Blue FCF Aluminium Lake (used for 4 mg tablets). Chemical Structure

Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl] ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, sparingly soluble in alcohol. It dissolves in dilute acid solutions. Risperidone Tablets, USP are available in 0.25 mg (dark yellow), 0.5 mg (Reddish brown), 1 mg (white) strengths, 2 mg (pink), 3 mg (yellow) and 4 mg (green) strengths. Each tablet for oral administration contains the following inactive ingredients: Anhydrous Lactose, Sodium Lauryl Sulfate, Microcrystalline Cellulose (101), Colloidal Silicon Dioxide, Sodium Starch Glycolate (Type A), Magnesium Stearate, HPMC 2910/ Hypromellose, Macrogol/ PEG (MW 400), Macrogol/ PEG (MW 8000), Titanium Dioxide. Also, the tablet contains Polyvinyl Alcohol Part Hydrolyzed (used for 0.25, 0.5, 2, 3, 4 mg tablets), Macrogol/ PEG (MW 3350) (used for 0.25, 0.5, 2, 3, 4 mg tablets), Talc (used for 0.25, 0.5, 2, 3, 4 mg tablets), D&C Yellow #10 Aluminium Lake (used for 0.25, 4 mg tablets), FD&C Yellow #6/ Sunset Yellow FCF Aluminium Lake (used for 0.25, 2, 4 mg tablets), Iron Oxide Red (used for 0.5 mg tablets), Lactose Monohydrate, Triacetin & Stearic Acid (used for 1 mg tablets), FD&C Red #40/Allura Red AC Aluminum Lake (used for 2 mg tablets) , Iron Oxide Yellow (used for 3 mg tablets) and FD&C Blue #1/ Brilliant Blue FCF Aluminium Lake (used for 4 mg tablets). Chemical Structure

Risperidone tablets, USP contains risperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.48. The structural formula is: Risperidone, USP is a white to almost white powder. Soluble in methylene dichloride, sparingly soluble in alcohol It is practically insoluble in water. Risperidone tablets, USP are for oral administration and available in 0.25 mg (yellow), 0.5 mg (brown), 1 mg (white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. Risperidone tablets contain the following inactive ingredients: lactose anhydrous, NF, microcrystalline cellulose, NF, magnesium stearate, NF, and pregelatinized starch, NF. Tablets of 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, and 4 mg also contain hypromellose and macrogol. The 0.25 mg tablets contain D&C Yellow #10 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Ferrosoferric Oxide, Iron Oxide Yellow and Titanium Dioxide; 0.5 mg tablets contain Iron Oxide Red and Titanium Dioxide; 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and Titanium Dioxide; the 3 mg and 4 mg tablets contain FD&C Yellow #5 Aluminum Lake and Titanium Dioxide; the 3 mg tablets contain FD&C Blue #2 Aluminum Lake and the 4 mg tablets contain FD&C Blue #1 Aluminum Lake. 1