Drugs Similar to LIDOCAINE

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. chemical structure for lidocaine

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. structuralformula

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula: C 14 H 22 N 2 0 • HCl • H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- α -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. lidocaine hydrochloride Epinephrine

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. chemical structure for lidocaine

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-,and has the following structural formula: Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols. ab

Uses temporarily relieves pain and itching due to minor cuts minor scrapes minor burns sunburn minor skin irritation insect bites

Lidocaine HCl 2% Jelly is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). Lidocaine HCl 2% Jelly contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Its molecular formula is C 14 H 22 N 2 O • HCl and its molecular weight is 270.80. Lidocaine HCl 2% Jelly also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine HCl 2% Jelly 30 mL and 5 mL tubes: Each mL contains 20 mg of lidocaine HCl. The formulation also contains methylparaben, propylparaben, hypromellose, and sodium hydroxide and/or hydrochloric acid to adjust pH to 6.0 to 7.0. Structural Formula

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea. chemical structure

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous, isotonic solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14 H 22 N 2 O • HCl) has the following structural formula: Each mL of the 1% solution contains lidocaine hydrochloride 10 mg, sodium chloride 7 mg and 1 mg methylparaben as antiseptic preservative. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg, sodium chloride 6 mg and 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. structure

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine USP, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, and has the following structural formula: Composition of lidocaine ointment USP, 5%: acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, (lidocaine, USP) 5% in a water miscible ointment vehicle containing polyethylene glycols. structure

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6- dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. chemical structure for lidocaine

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a white non-woven polyethylene terephthalate (PET) material backing and covered with a transparent PET release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: glycerin, D-sorbitol, propylene glycol, polyvinyl alcohol, urea, sodium polyacrylate, carboxymethylcellulose sodium, gelatin, polyacrylic acid, kaolin, tartaric acid, dihydroxyaluminum aminoacetate, methylparaben, propylparaben, and edetate disodium. image description

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea.

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide,2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols and peppermint oil. structural formula

LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure

Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: [Chemical Structure] Composition of Lidocaine Ointment USP, 5%: Each gram contains lidocaine USP, 5% in a water soluble base containing polyethylene glycol 400, polyethylene glycol 3350, and propylene glycol.

Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea. chemical structure

Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula C 14 H 22 N 2 0 HCl H 2 0 M.W. 288.8 Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula: C 9 H 13 NO 3 M.W. 183.21 COMPOSITION OF AVAILABLE SOLUTIONS BRAND NAME PRODUCT IDENTIFICATION FORMULA SINGLE DOSE CARTRIDGE Lidocaine hydrochloride Epinephrine (as the bitartrate) Sodium Chloride Potassium metabisulfite Edetate Disodium Concentration % Dilution (mg/mL) (mg/mL) (mg/mL) 2 1:50,000 6.5 1.2 0.25 2 1:100,000 6.5 1.2 0.25 The pH of all solutions are adjusted to USP limits with sodium hydroxide. Lidocaine Hydrochloride Epinephrine

For the temporary relief of pain

Lidocaine Ointment 5% contains a local anesthetic agent and is administered topically. See INDICAT IONS AND USAGE for specific uses. Lidocaine Ointment 5% contains lidocaine, which is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula: Composition of Lidocaine Ointment 5% : acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycols.

Use Temporarily relieves minor paln.

Use Temperarily relicwes miner pain.

use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily

Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Use: Help in temporarily slowing the onset of ejaculation

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.

Uses 1.Clean hands and treatment areawith mild soap and warm water, rinsethoroughly, then gently pat dry. 2. Apply a thick layer ofnumbingcream to the treatment area, makingsure to cover both the treatment areaand its surroundings. 3. Wrap tightly with plastic wrap andwait 40-60 minutes (Longer time,better effect.) 4. Wipe away residue, and waitanother 15-25 minutes for thenumbness to peak. 5. Begin the procedure.

Uses For the physical or local anesthesia associated with tattoo

Use For the physical or local anesthesia associated with tattoo

Uses: For the temporary relief of pain and itch in minor cuts, burns, scrapes, skin irritations, insect bites and sunburn

Use for the temporary relief of pain

Idications and Usage Uses: Temporaily relieves minor pains.

Use Temporarily relieves minor pain

Use Temporarily relieves minor pain.

DIRECTIONS Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor

DIRECTIONS ​Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor

Use – Lidocaine Patch US 1ct for the temporary relief of pain Use – Lidocaine Patch Singles US 1ct For the temporarily relief of pain

USES: FOR THE TEMPORARY RELIEF OF MINOR ACHES AND PAINS OF MUSCLES AND JOINTS ASSOCIATED WITH ARTHRITIS, SIMPLE BACKACHE, STRAINS, SPRAINS, MUSCLE SORENESS AND STIFFNESS.

Store in a cool place at 59-68°F, away from direct sunlight.

Use Temporarily relieves minor paln.

For temporary relief of pain

Use Temperarily relicwes miner pain.

use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily

Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites

Store in a cool place at 59-68°F, away from direct sunlight.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Use for the temporary relief of pain

Use for the temporary relief of pain

Uses For temporary relief of minor aches and pains of muscles and joints associated with: arthritis simple backache sprains strains bruises

Use: Help in temporarily slowing the onset of ejaculation

Use For the temporary relief of pain

Uses For the temporary relief of pain.

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.