Drugs Similar to XESSO STRAWBERRY REAR COMFORT GLIDE 4% LIDOCAINE

Use Temporarily relieves minor paln.

Use Temperarily relicwes miner pain.

use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily

Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.

Use: Help in temporarily slowing the onset of ejaculation

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.

Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.

Uses 1.Clean hands and treatment areawith mild soap and warm water, rinsethoroughly, then gently pat dry. 2. Apply a thick layer ofnumbingcream to the treatment area, makingsure to cover both the treatment areaand its surroundings. 3. Wrap tightly with plastic wrap andwait 40-60 minutes (Longer time,better effect.) 4. Wipe away residue, and waitanother 15-25 minutes for thenumbness to peak. 5. Begin the procedure.

Uses For the physical or local anesthesia associated with tattoo

Use For the physical or local anesthesia associated with tattoo

Uses: For the temporary relief of pain and itch in minor cuts, burns, scrapes, skin irritations, insect bites and sunburn

Use for the temporary relief of pain

Idications and Usage Uses: Temporaily relieves minor pains.

Use Temporarily relieves minor pain

Use Temporarily relieves minor pain.

DIRECTIONS Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor

DIRECTIONS ​Adults and children 12 years of age and over: clean and dry affected area apply 1 patch at a time to affected area, not more than 3 to 4 times daily remove film from patch and apply to the skin Children under 12 years of age: consult a doctor

Use – Lidocaine Patch US 1ct for the temporary relief of pain Use – Lidocaine Patch Singles US 1ct For the temporarily relief of pain

Uses for the temporary relief of pain and itching associated with • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Use(s) For the temporary relief of pain associated with minor burns

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

​Uses Temporary pain relief associated with minor burns

Use(s) For temporary relief of pain and itching associated with: • Sunburn • Minor burns • Insect bites • Cuts • Scrapes

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Availability Structure

Uses Uses For temporary relief of minor aches & pains of muscles & joints associated with: simple backache arthritis strains bruises sprains

Uses Uses For temporary relief of pain

Uses: For the temporary relief of pain and itching.

Uses for the temporary relief of pain and itching associated with cold sores and fever blisters Relieves dryness and softens cold sores and fever blisters Softens crust (scabs) associated with cold sores and fever blisters

USE for the temporary relief of pain

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. structural formula lidocaine hydrochloride

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS for specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Structural Formula

Use For the temporary relief of pain and discomfort associated with anorectal disorders.

Uses Provides temporary relief from pain and itching caused by sunburns, minor cuts, insect bites, and skin irritations.

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Minor Cuts & Scrapes Insect Bites

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Cuts & Scrapes Insect Bites

Uses For temporary relief of pain and itching due to minor skin irritation.

Uses Temporarily relieves minor pain

Use Temporarily relieves minor pain and itching associated with minor skin irritations.

Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.

Uses For temporary relief of pain

Uses For temporary relief of pain

Product Information Active Ingredient Lidocaine 4% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purpose Topical Anesthetic Uses for the temporary relief of pain Warnings For external use only Do not use more than 1 patch on your body at a time on puncture wounds, on cuts, irritated or swollen skin for more than one week without consulting a doctor When using this product use only as directed. Read and follow all directions and warnings on this carton. do not allow contact with the eyes do not bandage tightly or apply local heat (such as heating pads) to the area of use do not use at the same time as other topical analgesics dispose of used patch in manner that always keeps product away from children and pets. Used patches still contain the drug product that can produce serious adverse effects if a child or pet chews or ingests this patch Stop use and ask a doctor if condition worsens symptoms persist for more than 7 days or clear up and occur again within a few days redness or irritation develops you experience signs of skin injury, such as pain, swelling, or blistering where the product was applied If pregnant or breast-feeding, ask a health professional before use. Keep out of reach of children and pets. If swallowed, get medical help or contact a Poison Control Center right away (1-800-222-1222). Directions Adults and children over 12 years: wish and dry affected area Peel off the backing fim from one side of the patch carefully Apply the exposed portion of the patch to the affected area Gently press the patch with your hand to fit the affected area completely Do not exercise vigorously during use to prevent the patch from falling off use only 1 patch for a maximum of 8 hours children under 12 years of age: Ask a doctor before use Other Information store at room temperature 15°-30°C (59°-86°F). Inactive ingredients aluminum glycinate, glycerin, methyl acrylate, polyacrylic acid, polysorbate 80, propylene glycol, sodium polyacrylate, tartaric acid, poval, alcohol, water Questions or Comments? E-mail: [email protected] Child-Resistant Packaging Manufactured for CARE LIVING DIAGNOSTICS INC. Www.carelivingusa.com Made in China patch

Uses Temporarily relieves minor pain associated with: .Arthritis .Sprains .Simple backache .Bruises .Muscle strains .Cramps

Uses For temporary relief of pain

Use temporary relief of pain

Uses For temporary relief of pain and itching due to minor skin irritations.

Uses Temporarily relieves minor pain

Uses For temporary relief of pain

Uses Temporarily relieves pain and itching associated with: • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations

Uses For the temporary relief of pain and itching, associated with minor burns,sun burn, minor cuts, scrapes, insect bites, minor skin irritations, rashes due to poison ivy, poison oak, fever blister, cold sores.

Use For the temporary relief of minor pain.

Use For temporarily relieves pain and itching associated with minor burns, minor cuts or skin irritations

Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.

Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.

Uses Temporarily relieves minor pain