Drugs Similar to THERACARE ROLL-ON LIDOCAINE PAIN RELIEF LIQUID - LAVENDER
LIDOCAINE HCI
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
Uses Temporary pain relief for minor burns. For professional use only.
Uses can be used instead of soap and water to help clean minor cuts, scrapes, and burns. For the temporary relief of discomfort and pain associated with dermal procedures such as tattoo removal, tattoo, dermarolling, electrolysis, microblading and piercing. Temporarily relieves pain and itch while helping prevent infection Directions Shake Well before each use. Apply 2 to 3 pumps of foam soap and gently rub into skin. Leave it on for 5 to 10 minutes. Rinse off gently with running water or wipe with a clean paper towel. Use before, during and after the procedure. Keep bottle tightened to keep product fresh and effective. Adults and children 2 years old and older. Use to clean minor cuts, scrapes and burns by thoroughly washing with water. Rinse and air dry. Use no more than 3 times a day. Children under two years of age, ask a doctor Directions for Use were added.
Uses Temporary pain relief associated with minor burns
Uses Temporary pain relief associated with minor burns
Uses temporarily relieves minor pain
Uses temporarily relieves minor pain
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous, isotonic solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS & USAGE for specific uses. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Each mL of the 1% solution contains lidocaine hydrochloride 10 mg, sodium chloride 7 mg and 1 mg methylparaben as antiseptic preservative. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg, sodium chloride 6 mg and 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. STRUCTURE
Uses For the temporary relief of pain and itching associated with minor burns, sunburn, minor cuts, scrapes, insect bites, minor skin irritations, and rashes due to poison ivy, poison oak, or poison sumac.
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Availability Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine Hydrochloride Injection, USP solution contains, lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. STRUCTURE
Lidocaine Hydrochloride Injections are sterile, nonpyrogenic, aqueous, isotonic solutions that contain a local anesthetic agent and are administered parenterally by injection. See INDICATIONS & USAGE for specific uses. Each mL of the 1% solution contains lidocaine hydrochloride 10 mg and sodium chloride 7 mg. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg and sodium chloride 6 mg. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: STRUCTURE
Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows: Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula: Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula: DESC TABEL STRUCTURE 1 STRUCTURE 2
Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows: Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula: Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula: DESCRIPTION STRUCTURE 1 STRUCTURE 2
Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Composition of Lidocaine Hydrochloride Jelly USP, 2% Each mL contains 20 mg of lidocaine hydrochloride, and sodium carboxymethylcellulose as a viscosity-increasing agent. Sodium hydroxide may have been added to adjust pH to meet USP limits of 6 to 7. Carboxymethylcellulose sodium adjusts the resulting mixture to a suitable consistency, to enhance contact with mucosa and provide lubrication for instrumentation. This product contains no preservative and any unused portion should be discarded after initial use. STRUCTURE
Lidocaine hydrochloride, chemical name: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride has the following structural formula: Lidocaine Hydrochloride Injection, USP intravenous for cardiac arrhythmias, is a sterile, nonpyrogenic solution prepared from lidocaine with the aid of hydrochloric acid in Water for Injection. Each mL contains: Lidocaine HCl 20 mg; Sodium Chloride 6 mg; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (pH 5.0 to 7.0). The container is for single use; solution contains no preservative. STRUCTURE
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. DESCRIPTION 1 STRUCTURE
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C14H22N2O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. STRUCTURE
Lidocaine hydrochloride has the chemical name of acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-,monohydrochloride and has the molecular weight of 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Each single-dose vial contains Lidocaine Hydrochloride Injection, USP, which is a sterile nonpyrogenic aqueous solution intended for parenteral administration as a local anesthetic agent. See INDICATIONS & USAGE for special uses. Each mL contains 20 mg lidocaine hydrochloride and 6 mg sodium chloride, in Water for Injection. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH between 5.0 and 7.0. STRUCTURE
Lidotral® 3.88% Roll on Gel contains 38.8 mg of Lidocaine HCI per gram in a mild acidic vehicle with Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Aloe Barbadensis (Aloe Vera) Leaf Juice, Aminomethyl Propanol, Aqua (Purified Water), C30-45 Alkyl Cetearyl Dimethicone Crosspolymer, Cetearyl Alcohol Ceteth-20 Phosphate, Cyclopentasiloxane Dicetyl Phosphate, Dimethicone, Disodium EDTA, Ethyl Alcohol Ethylhexylglycerin, Glyceryl Stearates, Phenoxyethanol, Steareth-21. Lidocaine HCl is chemically designated as acetamide, 2-(diethylamino)-N-(2,6 dimethylphenyl), and has the following structure: Label
By Substance
Drugs sharing the same substance name
USES: FOR THE TEMPORARY RELIEF OF MINOR ACHES AND PAINS OF MUSCLES AND JOINTS ASSOCIATED WITH ARTHRITIS, SIMPLE BACKACHE, STRAINS, SPRAINS, MUSCLE SORENESS AND STIFFNESS.
Store in a cool place at 59-68°F, away from direct sunlight.
Use Temporarily relieves minor paln.
For temporary relief of pain
Use Temperarily relicwes miner pain.
use only as directed.avoid contact with the eyes, mucous membranes,orrashesdo not bandagetightily
Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites
Store in a cool place at 59-68°F, away from direct sunlight.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Apply a 2mm thick layer of cream, rub it in, and cover it with a waterproof film.Leave on for approximately 90 minutes before your procedure for maximum numbing effect.
Use for the temporary relief of pain
Use for the temporary relief of pain
Uses For temporary relief of minor aches and pains of muscles and joints associated with: arthritis simple backache sprains strains bruises
Use: Help in temporarily slowing the onset of ejaculation
Use For the temporary relief of pain
Uses For the temporary relief of pain.
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
Uses Directions Adults: When practical, clean the area with mild soap and warm water and rinse thoroughly. Gently dry by patting or blotting with toilet tissue or a soft cloth before applying.Children under 12 years of age: Consult a doctor. Apply externally to the affected area up to 6 times daily.
By Active Ingredients
Drugs sharing any active ingredients
Uses Temporarily relieves minor pain
Uses Temporarily relieves minor pain
Uses For temporary relief of pain
Uses Temporarily relieves pain and itching associated with: • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations
Uses For the temporary relief of pain and itching, associated with minor burns,sun burn, minor cuts, scrapes, insect bites, minor skin irritations, rashes due to poison ivy, poison oak, fever blister, cold sores.
Product Information Active Ingredient Lidocaine 4% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purpose Topical Anesthetic Uses for the temporary relief of pain Warnings For external use only Do not use more than 1 patch on your body at a time on puncture wounds, on cuts, irritated or swollen skin for more than one week without consulting a doctor When using this product use only as directed. Read and follow all directions and warnings on this carton. do not allow contact with the eyes do not bandage tightly or apply local heat (such as heating pads) to the area of use do not use at the same time as other topical analgesics dispose of used patch in manner that always keeps product away from children and pets. Used patches still contain the drug product that can produce serious adverse effects if a child or pet chews or ingests this patch Stop use and ask a doctor if condition worsens symptoms persist for more than 7 days or clear up and occur again within a few days redness or irritation develops you experience signs of skin injury, such as pain, swelling, or blistering where the product was applied If pregnant or breast-feeding, ask a health professional before use. Keep out of reach of children and pets. If swallowed, get medical help or contact a Poison Control Center right away (1-800-222-1222). Directions Adults and children over 12 years: wish and dry affected area Peel off the backing fim from one side of the patch carefully Apply the exposed portion of the patch to the affected area Gently press the patch with your hand to fit the affected area completely Do not exercise vigorously during use to prevent the patch from falling off use only 1 patch for a maximum of 8 hours children under 12 years of age: Ask a doctor before use Other Information store at room temperature 15°-30°C (59°-86°F). Inactive ingredients aluminum glycinate, glycerin, methyl acrylate, polyacrylic acid, polysorbate 80, propylene glycol, sodium polyacrylate, tartaric acid, poval, alcohol, water Questions or Comments? E-mail: [email protected] Child-Resistant Packaging Manufactured for CARE LIVING DIAGNOSTICS INC. Www.carelivingusa.com Made in China patch
Uses For temporary relief of pain and itching due to minor skin irritation.
Use Temporarily relieves minor pain and itching associated with minor skin irritations.
Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.
Uses For temporary relief of pain and itching due to minor skin irritations.
Uses Temporarily relieves minor pain
Uses For temporary relief of pain
Uses Temporarily relieves minor pain associated with: .Arthritis .Sprains .Simple backache .Bruises .Muscle strains .Cramps
Use For the temporary relief of minor pain.
Use For temporarily relieves pain and itching associated with minor burns, minor cuts or skin irritations
Uses For temporary relief of pain
Uses For temporary relief of pain
Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.
Use For temporary relief of local discomfort, itching, pain, soreness, or burning related to the tattoo process.
Uses Temporarily relieves minor pain
← Back to THERACARE ROLL-ON LIDOCAINE PAIN RELIEF LIQUID - LAVENDER