Drugs Similar to CEFOXITIN
CEFOXITIN
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
Cefoxitin for Injection, USP contains cefoxitin sodium a semisynthetic,broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. structural formula
Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans . Its chemical name is sodium ( 6R,7S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak ® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK ® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN. image description
Cefoxitin for injection is a semi-synthetic, broad-spectrum cepha antibiotic sealed under nitrogen for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for injection contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of cefoxitin for injection range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Cefoxitin for Injection, USP contains sterile cefoxitin sodium, USP equivalent to 1 or 2 grams cefoxitin. Chemical structure
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
CEFOXITIN FOR INJECTION, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: CEFOXITIN FOR INJECTION, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of CEFOXITIN FOR INJECTION, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 gram or 2 grams cefoxitin. Structural Formula
CEFOXITIN FOR INJECTION, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium. It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: CEFOXITIN FOR INJECTION, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of CEFOXITIN FOR INJECTION, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 grams cefoxitin. cef-structure
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6 R , 7 S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. Structural Formula
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 g or 2 g cefoxitin. Structural Formula
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
By Generic Name
Drugs with the same generic name (different brands)
Cefoxitin for Injection, USP contains cefoxitin sodium a semisynthetic,broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. structural formula
Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans . Its chemical name is sodium ( 6R,7S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak ® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK ® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN. image description
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
Cefoxitin for injection is a semi-synthetic, broad-spectrum cepha antibiotic sealed under nitrogen for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for injection contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of cefoxitin for injection range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Cefoxitin for Injection, USP contains sterile cefoxitin sodium, USP equivalent to 1 or 2 grams cefoxitin. Chemical structure
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6 R , 7 S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. Structural Formula
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 g or 2 g cefoxitin. Structural Formula
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
By Substance
Drugs sharing the same substance name
Cefoxitin for Injection, USP contains cefoxitin sodium a semisynthetic,broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. structural formula
CEFOXITIN FOR INJECTION, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: CEFOXITIN FOR INJECTION, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of CEFOXITIN FOR INJECTION, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 gram or 2 grams cefoxitin. Structural Formula
Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans . Its chemical name is sodium ( 6R,7S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak ® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK ® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN. image description
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . Its chemical name is sodium (6 R , 7 S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP is supplied as a dry powder in vials and contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7. Each pharmacy bulk package bottle contains sterile cefoxitin sodium, USP equivalent to 10 g of cefoxitin and is intended for intravenous infusion only. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. RECONSTITUTED STOCK SOLUTION MUST BE TRANSFERRED AND FURTHER DILUTED FOR I.V. INFUSION. Structural Formula
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
CEFOXITIN FOR INJECTION, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium. It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: CEFOXITIN FOR INJECTION, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of CEFOXITIN FOR INJECTION, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 grams cefoxitin. cef-structure
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 or 2 g cefoxitin. structural formula
Cefoxitin for injection is a semi-synthetic, broad-spectrum cepha antibiotic sealed under nitrogen for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans. Its chemical name is sodium (6R,7S)-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for injection contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of cefoxitin for injection range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Cefoxitin for Injection, USP contains sterile cefoxitin sodium, USP equivalent to 1 or 2 grams cefoxitin. Chemical structure
Cefoxitin for Injection, USP contains cefoxitin sodium a semi-synthetic, broad-spectrum cephalosporin antibiotic for parenteral administration. It is derived from cephalosporin C, which is produced by Cephalosporium Acremonium . It is the sodium salt of 3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate carbamate (ester). The molecular formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection, USP contains approximately 53.8 mg (2.3 milliequivalents) of sodium per gram of cefoxitin activity. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. Each conventional vial contains sterile cefoxitin sodium, USP equivalent to 1 g or 2 g cefoxitin. Structural Formula
Cefoxitin for Injection and Dextrose Injection is a sterile, nonpyrogenic, single-dose packaged combination of cefoxitin sodium USP and Dextrose Injection (diluent) in the DUPLEX ® sterile container. The DUPLEX ® Container is a flexible dual chamber container. The drug chamber is filled with cefoxitin sodium USP, a semi-synthetic, broad-spectrum cephalosporin antibacterial sealed under nitrogen for intravenous administration. Cefoxitin sodium USP is derived from cephamycin C, which is produced by Streptomyces lactamdurans . Its chemical name is sodium (6 R ,7 S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C 16 H 16 N 3 NaO 7 S 2 , and the molecular weight is 449.44. The structural formula is: Cefoxitin sodium contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin activity. The diluent chamber contains Dextrose Injection. The concentration of Dextrose Hydrous USP in Water for Injection USP has been adjusted to render the reconstituted drug product iso-osmotic. Dextrose Hydrous USP has been added to adjust the osmolality to approximately 290 mOsmol/kg (approximately 2 g (4% w/v) and 1.1 g (2.2% w/v) to the 1 g and 2 g doses, respectively). Dextrose Injection is sterile, nonpyrogenic, and contains no bacteriostatic and antimicrobial agents. Dextrose Hydrous USP has the following structural (molecular) formula: The molecular weight of Dextrose Hydrous USP is 198.17. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is intended for single intravenous use. When reconstituted according to instructions in the product labeling, the approximate osmolality of the reconstituted solution of Cefoxitin for Injection and Dextrose Injection is approximately 290 mOsmol/kg. After reconstitution, each 50 mL contains 1 gram of cefoxitin (equivalent to 1.05 gram of cefoxitin sodium) or 2 grams of cefoxitin (equivalent to 2.10 grams of cefoxitin sodium), with a pH of approximately 6.5. Solutions of Cefoxitin for Injection and Dextrose Injection range from colorless to light amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container system is supported by USP biological evaluation procedures. Structural Formula illustration Molecular Formula illustration