Drugs Similar to POTASSIUM CHLORIDE

Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose.

Potassium chloride extended-release capsules, USP, 10 mEq is an oral dosage form of microencapsulated potassium chloride containing 750 mg of potassium chloride USP equivalent to 10 mEq of potassium. Dispersibility of potassium chloride (KCl) is accomplished by microencapsulation and a dispersing agent. The resultant flow characteristics of the KCl microcapsules and the controlled release of K+ ions by the microcapsular membrane are intended to avoid the possibility that excessive amounts of KCl can be localized at any point on the mucosa of the gastrointestinal tract. Each crystal of KCl is microencapsulated by a process with an insoluble polymeric coating which functions as a semi-permeable membrane; it allows for the controlled release of potassium and chloride ions over an eight-to-ten-hour period. Fluids pass through the membrane and gradually dissolve the potassium chloride within the micro-capsules. The resulting potassium chloride solution slowly diffuses outward through the membrane. Potassium chloride extended-release capsules, USP, 10 mEq are electrolyte replenishers. The chemical name of the active ingredient is potassium chloride USP and the structural formula is KCl. Potassium chloride USP occurs as a granular crystalline powder. It is freely soluble in water and practically insoluble in ethanol. The inactive ingredients are, ethylcellulose, FD&C red #3, FD&C yellow # 6, gelatin, magnesium stearate, sodium lauryl sulfate, talc and titanium dioxide. The imprinting ink contains the following: black iron oxide, potassium hydroxide and shellac.

Potassium chloride extended-release capsules USP, 8 mEq and 10 mEq are oral dosage forms of microencapsulated potassium chloride containing 600 and 750 mg, respectively, of potassium chloride USP equivalent to 8 and 10 mEq of potassium. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The inactive ingredients are ethyl cellulose, triethyl citrate, talc, sodium lauryl sulfate, gelatin, titanium dioxide, shellac, propylene glycol, potassium hydroxide. In addition 600 mg [equivalent to 8 mEq of potassium] capsule also contain black iron oxide and 750 mg [equivalent to 10 mEq of potassium] capsule also contain FD&C blue #1 and FD&C red # 40.

Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange color powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: citric acid anhydrous, colloidal silicon dioxide, FD&C Yellow #6, natural and artificial orange flavor, and sucralose.

The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

The Potassium Chloride Extended-release Tablets, USP 20 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-release Tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride extended-release tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrate within one minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. Inactive Ingredients: Colloidal silicon dioxide, croscarmellose sodium, ethylcellulose, hyrpromellose, microcrystalline cellulose, polyethylene glycol and povidone. USP Assay preparation is pending.

The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

Potassium Chloride for Injection Concentrate, USP, is a sterile, nonpyrogenic, concentrated solution of potassium chloride, USP in water for injection administered by intravenous infusion only after dilution in a larger volume of fluid. They are provided in the following variety of concentrations and sizes comprising a choice of single-dose containers, all designed to provide the commonly prescribed amounts of potassium chloride for single-dose infusion after dilution in suitable large volume parenterals. * May contain hydrochloric acid for pH adjustment. Additive Solution * (conc. & size) K+ mEq/mL KCl mg/mL mOsmol/mL (calc.) 20 mEq/10 mL 2 149 4 40 mEq/20 mL 2 149 4 The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for single-dose injection (after dilution). When smaller doses are required, discard the unused portion. The pH is 4.6 (4.0 to 8.0). Potassium Chloride for Injection Concentrate, USP (appropriately diluted) is a parenteral fluid and electrolyte replenisher. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water.

The potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 15 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethylcellulose, microcrystalline cellulose, copovidone and sodium stearyl fumarate. USP sample preparation 2 is used in the assay. FDA approved dissolution test specifications differ from USP.

Potassium Chloride Extended-release Tablets, USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium Chloride Extended-release Tablets, USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Hydrogenated Vegetable Oil Type 1, Ethylcellulose (10cP), Ethylcellulose (100cP), Silicon Dioxide, Talc, Magnesium Stearate. The 600 mg tablets also contain Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Blue #1 / Brilliant Blue FCF Aluminum Lake, FD&C Blue #2 / Indigo Carmine Al 3% - 5% and the 750 mg tablets also contain of Polyvinyl Alcohol, Titanium dioxide, Macrogol / PEG, Talc, FD&C Yellow #5 / Tartrazine Aluminum Lake and FD&C Yellow #6 / Sunset Yellow FCF Aluminum Lake. "FDA approved dissolution test specifications differ from USP." and "FDA approved acceptance criteria for assay differs from USP test."

Potassium Chloride Extended-Release Tablets, USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 15 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq K of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride extended-release tablets is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride extended-release tablets is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride extended-release tablets begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients: croscarmellose sodium, ethylcellulose and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP. FDA approved sample preparation in the assay differs from USP test.

The Potassium Chloride Extended-Release Tablets USP, 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 15 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 10 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Its molecular weight is 74.55 g/mole. Potassium chloride, USP occurs as a white to off-white, crystalline, granular powder. It is freely soluble in water and insoluble in alcohol. Potassium Chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethyl cellulose, microcrystalline cellulose and triethyl citrate. Meets USP Dissolution Test 7.

Potassium Chloride Extended-Release Tablets, USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 750 mg of microencapsulated potassium chloride, equivalent to 10 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 15 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,125 mg of microencapsulated potassium chloride, equivalent to 15 mEq K of potassium in a tablet. Potassium Chloride Extended-Release Tablets, USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride, USP containing 1,500 mg of microencapsulated potassium chloride, equivalent to 20 mEq K of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended-Release Tablets, USP is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended-Release Tablets, USP is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended-Release Tablets, USP begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within one minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients: croscarmellose sodium, ethylcellulose and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP. FDA approved sample preparation in the assay differs from USP test.

Potassium Chloride for Injection Concentrate, USP, is a sterile, nonpyrogenic, concentrated solution of potassium chloride, USP in water for injection administered by intravenous infusion only after dilution in a larger volume of fluid. They are provided in the following variety of concentrations and sizes comprising a choice of single-dose containers, all designed to provide the commonly prescribed amounts of potassium chloride for single-dose infusion after dilution in suitable large volume parenterals. The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for single-dose injection (after dilution). When smaller doses are required, discard the unused portion. The pH is 4.6 (4.0 to 8.0). Potassium Chloride for Injection Concentrate, USP (appropriately diluted) is a parenteral fluid and electrolyte replenisher. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. The semi-rigid material used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Image2.jpg

Potassium chloride extended-release tablets are a solid oral dosage form of potassium chloride containing 750 mg, 1125 mg and 1500 mg of potassium chloride, USP, equivalent to 10 mEq, 15 mEq and 20 mEq of potassium, respectively, in a film-coated matrix tablet. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The 10 mEq, 15 mEq and 20 mEq tablets contain colloidal silicon dioxide, magnesium stearate, paraffin, polyethylene glycol, polyvinyl acetate, povidone, sodium lauryl sulphate, polyvinyl alcohol, talc, titanium dioxide, triethyl citrate, D&C yellow # 10 (for 15 mEq) and FD&C yellow # 6 (for 15 mEq). FDA approved dissolution test specifications and assay sample preparation method differs from USP.

Potassium chloride extended-release capsules are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, hydroxypropyl cellulose.The empty gelatin capsules contain gelatin and titanium dioxide; the 10 mEq capsules contain FD&C Blue #1, FD&C Red #3 and FD&C Yellow #6. In addition, for 8mEq capsule imprinting ink black contains shellac, propylene glycol, black iron oxide, potassium hydroxide and for 10mEq white ink contains shellac, propylene glycol, sodium hydroxide, povidone, titanium dioxide. FDA approved dissolution test specifications differ from USP.

Potassium Chloride is a white crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: Citric Acid Anhydrous, Silicon Dioxide, FD&C Yellow No.6, N-C Natural and Artificial Orange Flavor, and Sucralose.

The Potassium Chloride Extended-Release Tablets, USP 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrate within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. Inactive Ingredients: Acetyltributyl citrate, crospovidone, ethylcellulose, and microcrystalline cellulose. USP dissolution test is pending.

Potassium chloride extended-release tablets are a solid oral dosage form of potassium chloride containing 750 mg, 1125 mg and 1500 mg of potassium chloride, USP, equivalent to 10 mEq, 15 mEq and 20 mEq of potassium, respectively, in a film-coated matrix tablet. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The 10 mEq, 15 mEq and 20 mEq tablets contain colloidal silicon dioxide, magnesium stearate, paraffin, polyethylene glycol, polyvinyl acetate, povidone, sodium lauryl sulphate, polyvinyl alcohol, talc, titanium dioxide, triethyl citrate, D&C yellow # 10 (for 15 mEq) and FD&C yellow # 6 (for 15 mEq). FDA approved dissolution test specifications and assay sample preparation method differs from USP.

Potassium chloride extended-release tablets USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium chloride extended-release tablets USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, crystalline powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and practically insoluble in ethanol. Inactive Ingredients: Colloidal silicon dioxide, hydrogenated vegetable oil, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. In addition, the 8 mEq tablets contain iron oxide red. FDA approved acceptance criteria for assay differs from USP test. Meets USP Dissolution Test 5.

INDICATIONS Skin eruptions, swollen joints.

Uses ■ Temporarily relieves: ■ cold symptoms ■ sore throat ■ runny nose

INDICATIONS Relief of symptoms of colds, sore throat and runny nose with a white discharge.

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

INDICATIONS Indications: KALI MURIATICUM Congested ears

Uses Helps promote and maintain healthy skin. Directions Tip bottle slightly allowing for tablets to fall into the cap. Use cap to drop tablets into mouth and allow them to dissolve under the tongue. Adults and adolescents (12 years and older) Take 1 to 4 tablets, one to four times daily, or as recommended by your healthcare practitioner. Children (under 12 years) Take under the direction of your healthcare practitioner.

Potassium chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, potassium chloride is KCl with a molecular mass of 74.55. Each packet of light orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq. Each packet of Klor-Con powder contains the following inactive ingredients: FD&C Yellow No. 6, malic acid, neotame, and natural orange flavor (Modified food starch (with added corn syrup), maltodextrin, citric acid, silicon dioxide and natural tocopherols).

Klor-Con ® extended-release tablets are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Klor-Con ® extended-release tablets are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Paraffin wax pastilles, ethylcellulose, triethyl citrate, colloidal silicon dioxide, and magnesium stearate. White tablets also contain polyvinyl alcohol, titanium dioxide, polyethylene glycol 3350, and talc. Yellow tablets also contain polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol, D&C Yellow No. 10 aluminum lake, and FD&C Yellow No. 6 aluminum lake. FDA approved dissolution test specifications differ from USP. FDA approved acceptance criteria for assay differs from USP test.

Klor-Con ® extended-release tablets are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Klor-Con ® extended-release tablets are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Hydrogenated vegetable oil, magnesium stearate, polyethylene glycol, polyvinyl alcohol, silicon dioxide, talc and titanium dioxide. Yellow tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Yellow No. 6 Aluminum Lake. Blue tablets also contain FD&C Blue No. 1 Aluminum Lake and FD&C Blue No. 2 Aluminum Lake.

Klor-Con ® M10 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. Klor-Con ® M15 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. Klor-Con ® M20 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Klor-Con ® M is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Klor-Con ® M is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Klor-Con ® M begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

Klor-Con ® M10 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. Klor-Con ® M15 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. Klor-Con ® M20 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Klor-Con ® M is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Klor-Con ® M is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Klor-Con ® M begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

USES: COLDS, HEADACHES, EXHAUSTION, NERVOUSNESS, SKIN AND DIGESTIVE ISSUES** **C, K, CK & X ARE HOMEOPATHIC DILUTIONS.

USES: Temporarily relieves pustular eruptions, acne simplex and indurate. Helps prevent recurrence of bluish red and acne eruptions.**

Uses* Uses*: Homeopathic medicine for the temporary relief of allergy and hay fever symptoms. *Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

Indications & Usage Temporarily relieves allergy and sinus symptoms. Shortens duration and reduces severity of symptoms associated with the common cold and throat, nasal, bronchial irritations: cough, headache, hoarseness, sore throat, sinus pressure, chest congestion, nasal congestion, sneezing/runny nose, shrinks swollen nasal membranes, promotes sinus drainage, burning, itchy eyes, helps decongest sinus openings and passages.

Indications & Usage Temporarily relieves these symptoms: helps decongest sinus openings and sinus passages, shrinks swollen nasal membranse, promotes sinus drainage.

Indications and Usage Temporarily relieves these symptoms: helps decongest sinus openings and sinus passages, shrinks swollen nasal membranse, promotes sinus drainage.

Uses* Uses*: Homeopathic remedy for relieving wheezing and chest discomfort in pets. Warnings Warnings: If symptoms persist or worsen, seek advice of a veterinarian. If pet is pregnant or nursing, give only on advice of a veterinarian. Keep thi and all medicaiton out of reach of children.

Uses: For temporary relief of minor: sinus congestion* coughing* fatigue* nasal discharge* frontal headache* muscle aches* *Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution in 500 mL single-dose EXCEL ® flexible containers. Each mL contains sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl 2 ·2H 2 O) 0.048%, magnesium chloride hexahydrate (MgCl 2 ·6H 2 O) 0.03%, sodium acetate trihydrate (C 2 H 3 NaO 2 ·3H 2 O) 0.39%, sodium citrate dihydrate (C 6 H 5 Na 3 O 7 ·2H 2 O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg. The EXCEL ® plastic container is made from a multilayered film. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.

Uses Temporarily relieves discomfort due to tonsil issues, including sore throat, swelling, mucus, elevated body temperature, enlarged glands, painful swallowing, and head or neck aches. Temporarily supports immunity.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE. NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves discomfort due to tonsil issues, including sore throat, swelling, mucus, elevated body temperature, enlarged glands, painful swallowing, and head or neck aches. Temporarily supports immunity.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves discomfort due to tonsil issues, including sore throat, swelling, mucus, elevated body temperature, enlarged glands, painful swallowing, and head or neck aches. Temporarily supports immunity.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves occasional elevated body temperature and the early stages of body stress, including heat, discomfort, redness, and swelling.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves occasional elevated body temperature and the early stages of body stress, including heat, discomfort, redness, and swelling.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE. NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves occasional elevated body temperature and the early stages of body stress, including heat, discomfort, redness and swelling.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves discomfort due to hemorrhoids or piles, including itching, burning, and throbbing. Temporarily supports your body's defenses.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE. NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves discomfort due to hemorrhoids or piles, including itching, burning, and throbbing. Temporarily supports your body's defenses.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves discomfort due to hemorrhoids or piles, including itching, burning, and throbbing. Temporarily supports your body's defenses.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE, NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses: Temporarily relieves sneezing, dry cough, nasal congestion, tiredness, headaches, and nervous tension. This combination of all twelve cell salts temporarily supports energy, wellness, and the health of your immune system.*

Uses Temporarily relieves sneezing, dry cough, nasal congestion, tiredness, headaches, and nervous tension. This combination of all twelve cell salts temporarily supports energy, wellness, and the health of your immune system.*