Drugs Similar to SCHUESSLER TISSUE SALTS NAT PHOS ACID NEUTRALIZER 10

Uses Temporarily relieves symptoms associated with Acidity Indigestion Dyspepsia Heartburn

Uses Temporarily relieves discomfort due to acid reflux with indigestion and sour belching.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE. NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves occasional acidity, burning discomfort in the chest, gas, urinary tract discomfort, upset stomach, and sore, swollen, and painful joints. Temporarily supports the functions of your stomach, intestines, and joints.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses Temporarily relieves occasional acidity, burning discomfort in the chest, gas, urinary tract discomfort, upset stomach, and sore, swollen, and painful joints. Temporarily supports the functions of your stomach, intestines, and joints.* *CLAIMS BASED ON TRADITIONAL HOMEOPATHIC PRACTICE, NOT ACCEPTED MEDICAL EVIDENCE. NOT FDA EVALUATED. This product is not intended to diagnose, treat, cure, or prevent any disease.

Uses See the leaflet enclosed for detail.

Uses Temporarily relieves: indigestion heartburn

INDICATIONS: May temporarily relieve stiff muscles.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

Summary not available yet.

USES: Indigestion, heartburn, and gas**. **C, K, CK & X are homeopathic dilutions

INDICATIONS Use according to standard homeopathic indications for self-limiting conditions. Common Materia Medica indications: indigestion, sour belching, hyperacidity, stiffness.*

Uses Temporarily relieves symptoms associated with Acidity Indigestion Dyspepsia Heartburn

Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1 .1 mEq).

Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and the equivalent of 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1.1 mEq). The components of K-PHOS® NEUTRAL have the following chemical names and molecular formulae: Dibasic Sodium Phosphate, Anhydrous Molecular Formula: Na2HPO4, Molecular Weight: 141.96. Monobasic Potassium Phosphate Molecular Formula: KH2PO4, Molecular Weight: 136.09. Monobasic Sodium Phosphate, Monohydrate Molecular Formula:NaH2PO4.H2O, Molecular Weight: 137.98. Inactive Ingredients: Lactose monohydrate, povidone, white coating (hydroxypropyl methylcellulose, titanium dioxide, maltodextrin, triacetin, glycerol triacetate, polyethylene glycol, sodium citrate, and stearic acid), sodium starch glycolate, and magnesium stearate.

Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets (sodium phosphate monobasic monohydrate and sodium phosphate dibasic anhydrous) is an osmotic laxative used to clean the colon prior to colonoscopy. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is manufactured with a highly soluble tablet binder and does not contain microcrystalline cellulose (MCC). Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are white to off-white uncoated tablet, modified oval shaped, biconvex, bisect on one side and plain on the other. Debossed "N" on the left side of the bisect and "03" on the right side of the bisect. Each Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablet contains 1.102 grams of Monobasic Sodium Phosphate, USP and 0.398 grams of Dibasic Sodium Phosphate, USP for a total of 1.5 grams of sodium phosphate per tablet. Inert ingredients include polyethylene glycol 8000, NF; and magnesium stearate, NF. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is gluten-free. The structural and molecular formulae and molecular weights of the active ingredients are shown below: Monobasic sodium phosphate, USP Dibasic sodium phosphate, USP structure 1 structure 2

INDICATIONS Relief of symptoms of indigestion, heartburn, flatulence and burping.

Uses Temporarily relieves symptoms associated with: General debility Fatigue Exhaustion Tension

Uses Temporarily relieves symptoms associated with General debility Fatigue Exhaustion Tension

Uses Temporarily relieves symptoms associated with Stress Mild anxiety Mild neuralgic pain General debility

Uses Temporarily relieves symptoms associated with: Stress Mild anxiety Mild neuralgic pain General debility

Uses Temporarily relieves symptoms associated with Acidity Indigestion Dyspepsia Heartburn

Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO 4 . It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 15 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH 2 PO 4 • H 2 O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na 2 HPO 4 , colorless or white granular salt freely soluble in water. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Sodium Phosphates Injection, USP, 3 mmol/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in Water for Injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains: Monobasic sodium phosphate, monohydrate, 276 mg; dibasic sodium phosphate, anhydrous, 142 mg (equivalent to dibasic sodium phosphate, heptahydrate, 268 mg); Water for Injection q.s. In the 5 mL and 15 mL product, phosphoric acid and/or NaOH may have been added for pH adjustment. Each mL provides 3 mmol of phosphorus and 4 mEq sodium. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.7 (approx.). The osmolar concentration is 7 mOsmol/mL (calc.) The solution is intended as an alternative to potassium phosphate to provide phosphate ion (PO 4 3- ) for addition to large volume infusion fluids for intravenous use. Sodium Phosphates, USP, monohydrate monobasic is chemically designated NaH 2 PO 4 • H 2 O. Occurs as white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP, anhydrous, is chemically designated Na 2 HPO 4 . Occurs as a colorless or white granular salt freely soluble in water.

Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO 4 . It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH 2 PO 4 • H 2 O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na 2 HPO 4 , colorless or white granular salt freely soluble in water.

Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO 4 . It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH 2 PO 4 • H 2 O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na 2 HPO 4 , colorless or white granular salt freely soluble in water. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO 4 . It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH 2 PO 4 • H 2 O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na 2 HPO 4 , colorless or white granular salt freely soluble in water. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Uses to help calm acid indigestion, upset stomach, and heartburn.

Uses Uses* Temporarily relieves the symptoms of: ■ nausea ■ minor stomach pain or cramping ■ gas ■ diarrhea ■ stomach upset from excessive eating or drinking ■ heartburn

Uses Temporarily relieves symptoms associated with Acidity Indigestion Dyspepsia Heartburn