Drugs Similar to POVIDONE-IODINE PREP PADS MEDIUM

Uses First aid antiseptic to help prevent infection in minor cuts, scrapes and burns

Uses For preparation of the skin prior to surgery Helps reduce bacteria that potentially can cause skin infections

Use for antiseptic skin preparation

Use for antiseptic skin preparation

Uses Patient preoperative skin preparation: Surgical hand scrub: For preparation of the skin prior to surgery Helps reduce bacteria that potentially can cause skin infection Significantyl reduces the number of micro-organisms on the hands and forearms prior to surgery or patient care

Use: First aid antiseptic to help prevent the risk of infection in minor cut, scrapes and burns.

Uses First aid antiseptic to help prevent the risk of infection in minor cut, scrapes, and burns.

Use helps reduce bacteria that potentially can cause skin infection

Uses antiseptic skin preparation first aid to help prevent infection in minor cuts, scrapes, and burns

Use • antiseptic skin preparation • single use when used for patient preoperative skin preparation

Use • antiseptic skin preparation • single use when used for patient preoperative skin preparation

Uses antiseptic skin preparation single use when used for patient preoperative skin preparation and/or preinjection indications.

Use antiseptic skin preparation

Use • antiseptic skin preparation • single use when used for patient preoperative skin preparation and/or preinjection indications

Use • antiseptic skin preparation • single use when used for patient preoperative skin preparation

USE For preparation of the skin prior to surgery Helps reduce bacteria that potentially can cause skin infection INDIACATIONS AND USAGE Prolonged exposure to wet solution may cause irritation or, rarely, severe skin reactions In pre-operative prepping, avoid “pooling” beneath the patient

Use preoperative cleaning of healthcare personnel arms and hands. Significantly reduces the number of micro-organisms on the hands and forearms prior to surgery.

Povidone-Iodine is a broad-spectrum microbicide with the chemical formulas: 2-pyrrolidinone, 1- ethenyl-, homopolymer, compound with iodine; 1-vinyl-2-pyrrolidinone polymer, compound with iodine. The structural formula is as follows: BETADINE* 5% Sterile Ophthalmic Prep Solution contains 5% povidone-iodine (0.5% available iodine) as a sterile dark brown solution stabilized by glycerin. Inactive Ingredients: purified water, citric acid, glycerin, nonoxynol-9, sodium chloride, sodium hydroxide, and dibasic sodium phosphate.

Uses First aidto help prevent infection in minor cuts scrapes burns

Uses First aid to help prevent infection in minor cuts scrapes burns

Use(s) for preparation of the skin prior to surgery first aid to help prevent infection in minor cuts, scrapes, and burns

first aid to help prevent infection in minor ■ cuts ■ scrapes ■ burns

Antiseptic

Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E )-(2 S ,3 R ,4 R ,5 S )-5-[(2 S ,3 S ,4 S ,5 S )-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2 H -pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26 H 44 O 9 and the molecular weight is 500.62. The chemical structure is: Image 1

Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( E )-(2 S ,3 R ,4 R ,5 S )-5-[(2 S ,3 S ,4 S ,5 S )-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2 H -pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26 H 44 O 9 and the molecular weight is 500.62. The chemical structure is: Image 1

Antiseptic

Put 200 mg deep into the vagina once a day. It is advisable to insert it in the evening before bedtime. To increase or decrease appropriately according to age and symptoms.

Uses First aid to help prevent the rise of infection in minor cuts, scrapes and burns

Dilute 30 ml of water in about 1 liter of hot water and wash the inside and outside of vagina once or twice a day.Clean sterilizable vaginal cleaning, local cleaning, and deodorization once or twice a week.

antiseptic

Use Antiseptic for preparation of the skin.

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. structure DESCRIPTION Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Chemical Structure

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. structure DESCRIPTION Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 1% mg/mL lidocaine HCl (anhyd.) 10 mg/mL sodium chloride 7 Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: image description

Bupivacaine Hydrochloride Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4) ] . Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula: Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 5 mg of bupivacaine hydrochloride (equivalent to 4.44 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. Chemical Structure DESCRIPTION Methylprednisolone acetate injectable suspension, USP is a sterile anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in 40 mg/mL strength: Each mL of these preparations contains: Methylprednisolone acetate..................................40 mg Polyethylene glycol 3350...................................29.1 mg Polysorbate 80................................................ 1.94 mg Monobasic sodium phosphate monohydrate........ 6.8 mg Dibasic sodium phosphate anhydrous USP............1.42 mg Benzyl alcohol added as a preservative............... 9.16 mg Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20- dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β) and 11β,17,21-Trihydroxy-6α-methylpregna-1,4-diene-3,20-dione 21-acetate the molecular weight is 416.51. The structural formula is represented below: Methylprednisolone acetate sterile aqueous suspension contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. image description

-Washing whenever a germicidal soap is required -Maximum degerming of hands