Drugs Similar to TRICITRATES

Tricitrates Oral Solution, USP is a stable orange colored and cherry flavored oral systemic alkalizer containing potassium citrate, sodium citrate, and citric acid in a sugar-free, non-alcoholic base. Tricitrates Oral Solution, USP contains in each teaspoonful (5 mL): Potassium Citrate Monohydrate, USP 550 mg Sodium Citrate Dihydrate, USP 500 mg Citric Acid Monohydrate, USP 334 mg Each mL contains 1 mEq potassium ion and 1 mEq sodium ion and is equivalent to 2 mEq bicarbonate (HCO 3 ). Inactive Ingredients: saccharin sodium, sodium benzoate, sorbitol solution, FD&C yellow # 6, wild cherry flavor, and purified water. ACTIONS Potassium citrate and sodium citrate are absorbed and metabolized to potassium bicarbonate and sodium bicarbonate, thus acting as systemic alkalizers. The effects are essentially those of chlorides before absorption and those of bicarbonates subsequently. Oxidation is virtually complete so that less than 5% of the citrates are excreted in the urine unchanged.

Sterile. Non-pyrogenic. Do not use unless the solution is clear and the container is intact. Rx Only. Single use container. For use only with apheresis devices. See apheresis device operator's manual for complete instructions.

ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight (%w/v) Citric Acid, Monohydrate C 6 H 8 O 7 192.12 Dextrose Monohydrate C 6 H 12 O 6 ∙ H 2 O 198.17 Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A contains: (%w/v) Citric Acid, Monohydrate 0.8 g; Dextrose Monohydrate 2.45 g; Sodium Citrate Dihydrate 2.2 g; and Water for Injection. The polyolefin bag is not made with natural rubber latex or PVC. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The solution contact layer is an elasticized polyolefin. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to food additives, herbicides and insecticides including muscle weakness, skin irritation, poor muscle coordination, headache, cough, occasional diarrhea, dizziness, fatigue, fever, stomach pain and vomiting.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight Dextrose Monohydrate USP C 6 H 12 O 6 ∙ H 2 O 198.17 Trisodium Citrate Dihydrate USP C 6 H 9 Na 3 O 9 294.10 Sodium Chloride USP NaCl 58.44 Monobasic Sodium Phosphate Monohydrate USP NaH 2 PO 4 ∙ H 2 O 137.99 Citric Acid Monohydrate USP C 6 H 8 0 7 ∙ H 2 O 210.14 Adenine USP C 5 H 5 N 5 135.13 Water for Injection USP H 2 O 18.00 Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.

INDICATIONS: For temporary relief of debility, exhaustion, exhaustion after slight exertion, and dysentery.

Uses for the relief of ● heartburn ● acid indigestion ● sour stomach

Uses for the relief of heartburn acid indigestion upset stomach associated with these symptoms

Uses for the relief of heartburn acid indigestion sour stomach upset stomach associated with these symptoms

Uses for the relief of heartburn acid indigestion sour stomach upset stomach associated with these symptoms

Each 10mL contains Citric Acid Monohydrate USP 0.08 g Sodium Citrate Dihydrate USP 0.220 g Dextrose Monohydrate USP 0.245 g In Water for Injection USP

ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A is designed to be added to blood products collected for extracorporeal processing, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal processing set. The content of the solution bag is considered sterile. This product has a sterile fluid path only. The clear overwrap is not considered a sterile barrier. The solution is non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight (%w/v) Citric Acid, Monohydrate C 6 H 8 O 7 192.12 Dextrose Monohydrate C 6 H 12 O 6 ∙ H 2 O 198.17 Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A contains: (%w/v) Citric Acid, Monohydrate 0.8 g; Dextrose Monohydrate 2.45 g; Sodium Citrate Dihydrate 2.2 g; and Water for Injection. The solution bag is not made with natural rubber latex or PVC. The solution bag is made from a polyolefin film. It contains materials that have been tested to demonstrate the suitability of the solution bag for storing pharmaceutical solutions. The solution contact layer is a polyolefin. The solution bag is nontoxic and biologically inert. The solution bag is a closed system and is not dependent upon entry of external air during administration. The solution bag is covered with a clear overwrap to provide protection from the physical environment. The content of the solution bag is considered sterile. This product has a sterile fluid path only. The clear overwrap is not considered a sterile barrier.

For use with 3-pump hemodialysis machines only, using purified water.

Balanced Salt Solution Sterile Irrigating Solution is a sterile balanced salt solution in 500 mL single-dose EXCEL ® flexible containers. Each mL contains sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl 2 ·2H 2 O) 0.048%, magnesium chloride hexahydrate (MgCl 2 ·6H 2 O) 0.03%, sodium acetate trihydrate (C 2 H 3 NaO 2 ·3H 2 O) 0.39%, sodium citrate dihydrate (C 6 H 5 Na 3 O 7 ·2H 2 O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.0. The osmolality is approximately 300 mOsm/Kg. The EXCEL ® plastic container is made from a multilayered film. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.

BSS ™ Sterile Irrigating Solution is a sterile balanced salt solution, each mL containing sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl 2 •2H 2 O) 0.048%, magnesium chloride hexahydrate (MgCl 2 •6H 2 O) 0.03%, sodium acetate trihydrate (C 2 H 3 NaO 2 •3H 2 O) 0.39%, sodium citrate dihydrate (C 6 H 5 Na 3 O 7 •2H 2 O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.5. The osmolality is approximately 300 mOsm/Kg.

BSS™ Sterile Irrigating Solution is a sterile balanced salt solution, each mL containing sodium chloride (NaCl) 0.64%, potassium chloride (KCl) 0.075%, calcium chloride dihydrate (CaCl 2 •2H 2 O) 0.048%, magnesium chloride hexahydrate (MgCl 2 •6H 2 O) 0.03%, sodium acetate trihydrate (C 2 H 3 NaO 2 •3H 2 O) 0.39%, sodium citrate dihydrate (C 6 H 5 Na 3 O 7 •2H 2 O) 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. The pH is approximately 7.5. The osmolality is approximately 300 mOsm/Kg.

For use with 3-pump hemodialysisi machines only, using purified water (StandardUNE-EN ISO 23500-3:2019).

INDICATIONS Heavy metal detox.

INDICATIONS Radiation detox.

Uses For the relief of Heartburn, acid indigestion, and upset stomach associated with these symptoms.

Take 15 minutes before meals