Drugs Similar to DR.JUCRE REBIRTH EYE
NIACINAMIDE
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Uses Uses: Helps skin whitening.
After showering, wipe off excess water and spray the product evenly 2-3 times on the desired area (except the face) at a distance of 15-20cm.
After preparing the skin texture with toner, gently spread it over the enlarged pores and let it absorb.
Uses ■ Helps brighten skin tone
Uses ■ Helps brighten skin tone
When washing the face, take an appropriate amount and foam, then gently cleanse as if massaging and rinse thoroughly.
apply proper amount to the skin
Uses ■ Lackluster-looking skin is rapidly refreshed and revitalised to create a healthy, vibrant glow. Day after day, it fades dark spots and discolourations.
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
apply proper amount to the skin
Use after face cleansing. 2.Take anappropriate amount of this productandapply it to the face.3.From the frequency of the face (dryareas)massage in circular motions to thewhole face. 4.Can be absorbed completely.
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structural-formula
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine, USP is an endogenous nucleoside and is chemically described as 6-Amino-9- β -D-ribofuranosyl- 9H -purine. Adenosine, USP has the following structural formula: The molecular formula for adenosine, USP is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Adenosine injection, USP is a sterile, non-pyrogenic, clear, colorless solution for intravenous use. Each mL of adenosine injection, USP contains adenosine USP, 3 mg and sodium chloride 9 mg in water for injection q.s. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each Adenosine Injection, USP vial contains a sterile, non-pyrogenic solution of adenosine 3 mg per mL and sodium chloride 9 mg per mL in water for injection, with pH between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C10H13N5O4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. structure
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5. structure
By Active Ingredients
Drugs sharing any active ingredients
Uses ■ Helps improve skin healthy and good for sensitive skin
Uses ■ Helps improve skin healthy and good for sensitive skin
Uses ■ Helps charging skin moisture ■ Helps improve skin elasticity
Uses ■ Helps improve skin wrinkles and good for sensitive skin
Uses ■ Helps brighten skin tone. ■Carefully up to toe tips and between toes tight moisturization, safely usable foot pack completed with the human body application test. Put socks on, plastic covers on, completed with 2 steps! Take care of your feet softly moisturize, and nourish comfortably at home, all cleared!
Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem
Uses For skin barrier repair, perfect for oily skin.
Uses - Key ingredients: Human cord blood stem cell conditioned media / Defined cell culture media - Soft and moist clear texture for brilliant and elastic skin - for anti-aging skin care product by key ingredients from human and nature
Uses For skin barrier repair, perfect for oily skin.
Uses For skin barrier repair, perfect for oily skin
Uses ■ Helps brighten skin tone. ■ Helps prevent wrinkle problem.
Directions 1. Wash face and take your makeup off and use skin toner to increase effectiveness. 2. Take out the sheet mask from the pouch and apply mask with the eyes and lips as the center. 3. Wear for 15~20 minutes and relax. 4. Remove mask and gently stroke face to make remaining essence completely absorbed into the skin.
Uses ■ Helps improve skin wrinkles and good for sensitive skin
Uses ■ Helps brighten skin tone. ■ Helps prevent wrinkle problem.
Uses ■ Serum, skin and lotion all in one product ■ Helps brighten skin tone ■ Helps improve wrinkle problem ■ Strengthen skin barrier function ■ Enhancement of antioxidant function ■ Enhancement of moisturizing function
Use(s) ■ Dual functional: Dark skin brightening and Anti-wrinkle ■ Immediately smoothes troubled skin ■ Block unpleasant Odor ■ Quick hydration with hyaluronic acid ■ Increase beneficial bacteria
Directions Apply an appropriate amount onto the entire face, and gently pat for better absorption.
Uses ■ Helps brighten skin tone ■ Helps improve wrinkle problem
Uses ■ Reduce wrinkles and brighten ■ Supply moisture ■ Helps calm down skin ■ Smooth skin
Uses ■ Skin elasticity ■ Antioxidants ■ Pore care ■ Reduce wrinkles and brighten