Drugs Similar to TOX-CHORD

Uses: Temporary relief of difficult respiration, headaches, skin eruptions, nausea.

Straighten the cleaning solution Pour it into the cleaning position for cleaning Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes,ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Saline Solution is intended for use in OTC ear,nose,and throat devices intended specifically to administer medicinal substances to treat ear,nose,and throat disorders.These instruments include the powder blower,dropper,ear wick,manual nebulizer pump,and nasal inhaler. If using with an OTC ear,nose,or throat device,the follow the directions provided with the device and only use as directed.

Usage: This product is designed for gentle cleaning of the face, mouth, nose, eyes, ears, and wounds. It can also be used with a nebulizer to help relieve discomfort in the nose and mouth.

Straighten the cleaning solution Pour it into the cleaning position for cleaning

This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. 0.308 mOsmol/mL (calc.). 0.9% Sodium Chloride Injection, USP contains no preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.3 (4.5 to 7.0). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The glass container is a Type I borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below: 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Sodium Chloride Injection, USP solutions are sterile and nonpyrogenic. They are parenteral solutions containing various concentrations of sodium chloride in water for injection intended for intravenous administration. For 0.45% Sodium Chloride Injection, USP, each 100 mL contains 450 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH for both concentrations in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solutions are parenteral fluid and electrolyte replenishers. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Uses Helps prevent sunburn.

Uses Helps prevent sunburn. If used as directed with other sun protection measures (see Directions ), decreases the risk of skin cancer and early skin aging caused by the sun.

Stop use and ask a doctor if rash occurs.

Stop use and ask a doctor if rash occurs.

Use Use Protect UVA and UVB rays and support sun protection.

Uses Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early aging caused by the sun.

Uses Helps prevent sunburn If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early aging caused by the sun.

USES: COLDS, HEADACHES, EXHAUSTION, NERVOUSNESS, SKIN AND DIGESTIVE ISSUES** **C, K, CK & X ARE HOMEOPATHIC DILUTIONS.

Summary not available yet.

Summary not available yet.

HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to increased appetite, regulation of fat metabolism, headache and fatigue.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: May temporarily relieve tiredness, weakness, general fatigue, exhaustion, and weakness of memory.** **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: For temporary relief of skin rashes, congestion, hay fever, headaches, and chest constriction.

INDICATIONS: For temporary relief of muscular exhaustion, debility after exercise and lowered vitality in the female after exercise.

INDICATIONS: For temporary relief to allergies due to animals.

INDICATIONS For the temporary relief of occasional headache, minor backache, indigestion, nausea, or water retention due to sensitivity to phenolic compounds found in foods or other products.*

INDICATIONS AND USAGE Food cravings, great appetite, regurgitation of food, nauseau, eating relieves discomfort, constant belching, bloating, sluggish, overweight.

INDICATIONS: For temporary relief of fever with digestive symptoms, muscular aches & pains associated with the flu.

INDICATIONS: May temporarily relieve symptoms associated with attention disorders, such as lack of attention, poor concentration, hyperactivity, procrastination, and memory and comprehension problems.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

INDICATIONS For the temporary relief of occasional headache, insomnia, anxiousness, nausea or vomiting, or excessive sweating due to sensitivity to phenolic compounds found in foods or other products.*

INDICATIONS: Food cravings, great appetite, regurgitation of food, nausea, eating relieves discomfort, constant belching, bloating, sluggish, overweight.

HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms related to aging such as joint pain, fatigue, and foggy memory.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS Temporarily relieves confusion, difficulty with self-expression, low self-confidence, grief, or sadness.*

INDICATIONS Temporarily relieves weakened sense of self-identity, anger, fear, jealousy, or easily taking offense.*

Uses* According to homeopathic indications, these ingredients provide temporary relief of cold and flu symptoms such as: • Nasal and sinus congestion, runny nose, sore throat, coughing, sneezing, and chills and fever, after serious causes have been ruled out by a physician. * These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS For the temporary relief of occasional headache, itching, fatigue, runny nose, sniffling, wheezing, or congestion due to sensitivity to phenolic compounds found in foods or other products.*

INDICATIONS Temporarily relieves melancholia, hopelessness or weakness in face of struggle, or diminished awareness.*

INDICATIONS For the temporary relief of runny nose, sneezing, itching of the nose or throat, and itchy, watery eyes due to sensitivity to common allergens in the tropics and Hawaii.*

INDICATIONS For the temporary relief of tiredness, general weakness, muscle fatigue, occasional headache, dizziness, sadness, confusion, or irritability.*

HOMEOPATHIC INDICATIONS: For temporary relief of mild to moderate arthritic pain and joint stiffness.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.