Drugs Similar to ESTRADIOL 1557
ESTRADIOL
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
Climara (estradiol transdermal system), is designed to release estradiol continuously upon application to intact skin. Six (6.5, 9.375, 12.5, 15, 18.75 and 25 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 6.5, 9.375, 12.5, 15, 18.75 or 25 cm 2 , and contains 2, 2.85, 3.8, 4.55, 5.7 or 7.6 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The Climara transdermal system comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1. A translucent polyethylene film. 2. An acrylate adhesive matrix containing estradiol USP. 3. A protective liner of siliconized or fluoropolymer-coated polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (acrylate copolymer adhesive, fatty acid esters, and polyethylene backing) are pharmacologically inactive. Chemical Structure Patch Diagram
Divigel (estradiol gel) 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Divigel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: Divigel Chemical Structure The remaining components of the gel (carbomer, ethanol, propylene glycol, purified water, and triethanolamine) are pharmacologically inactive. Divigel Chemical Structure
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP. 1 2
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
ELESTRIN (estradiol gel) contains 0.06% of estradiol, in a colorless, non-staining hydroalcoholic gel base. One pump actuation delivers ELESTRIN in a unit dose of 0.52 mg of estradiol in 0.87 g of gel. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17-diol, (17β)-. It has a molecular formula of C 18 H 24 O 2 •½H 2 O and molecular weight of 281.4. The structural formula is: The active component of ELESTRIN is estradiol. The remaining components of the gel (ethanol, propylene glycol, diethylene glycol monoethyl ether, carbomer homopolymer type C, triethanolamine, edetate disodium, and purified water) are pharmacologically inactive. Elestrin Structural Formula
Each gram of ESTRACE (estradiol vaginal cream USP 0.01%) contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary -butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.37. The structural formula is: The structural formula for ESTRACE (estradiol vaginal cream, USP, 0.01%) contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary-butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C18H24O2 and molecular weight of 272.37.
Each gram of ESTRACE (estradiol vaginal cream USP 0.01%) contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary -butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.37. The structural formula is: The structural formula for ESTRACE (estradiol vaginal cream, USP, 0.01%) contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary-butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C18H24O2 and molecular weight of 272.37.
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Transdermal System, USP is designed to release estradiol continuously upon application to intact skin. Six (7.5, 11.25, 15, 18, 22.5 and 30 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.5, 11.25, 15, 18, 22.5 or 30 cm 2 , and contains 1.888, 2.832, 3.777, 4.532, 5.665 or 7.553 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white or creamy white, small crystals or crystalline powder, odorless, stable in air and hygroscopic. Estradiol USP is chemically described as estra-1,3,5(10)-triene-3, 17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The Estradiol Transdermal System, USP comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: A translucent polyethylene film. An acrylate adhesive matrix containing estradiol USP. A protective liner of silicone coated polyester film is attached to the adhesive surface and must be removed before the system can be used. Cross Section of the System Estradiol Transdermal System, USP is packaged with additional pieces of protective film above and below the system within each pouch. These are discarded at the time of use. The active component of the system is estradiol USP. The remaining components of the system (acrylic adhesive, colloidal silicon dioxide, ethyl oleate, glyceryl monolaurate, isopropyl myristate, povidone and polyethylene backing) are pharmacologically inactive. FDA approved drug release test specifications differ from USP. Estradiol Transdermal System Estradiol Transdermal System
Estradiol transdermal system, USP is designed to provide nominal in vivo delivery of 0.014 mg of estradiol per day continuously upon application to intact skin. The period of use is 7 days. The transdermal system has a contact surface area of 3.9 cm 2 , and contains 0.982 mg of estradiol USP. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The estradiol transdermal system, USP comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1. a translucent polyethylene film. 2. an acrylate adhesive matrix containing estradiol USP. 3. A protective liner of silicon coated polyester film is attached to the adhesive surface and must be removed before the transdermal system can be used. Cross Section of the System: Estradiol transdermal system, USP is packaged with additional pieces of protective film above and below the system within each pouch. These are discarded at the time of use. The active component of the transdermal system is estradiol USP. The remaining components of the transdermal system (acrylic adhesive, colloidal silicon dioxide, ethyl oleate, glyceryl monolaurate, isopropyl myristate, povidone, and polyethylene backing) are pharmacologically inactive. FDA approved drug release test specifications differ from USP. Estradiol Transdermal System, 14 mcg/day Estradiol Transdermal System, 14 mcg/ day
Summary not available yet.
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol (62.03% v/v), propylene glycol, purified water, and triethanolamine) are pharmacologically inactive.
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structure formula.jpg
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Each gram of estradiol vaginal cream, USP, 0.01% contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary -butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C18H24O2 and molecular weight of 272.37. The structural formula is: structural formula
By Substance
Drugs sharing the same substance name
USES: This is a topical cream that contains bio-identical estriol and estradiol derived from wild yam and formulated in an 80:20 ratio. When applied to the skin it can help balance your hormones and provide temporary relief from menopausal symptoms such as hot flashes. DIRECTIONS: Apply once or twice a day. Massage into inner arms, thighs, chest or apply to inner forearm and rub arms together or use as directed by your Physician.
Abigale, 1 mg/0.5 mg is a single tablet for oral administration containing 1 mg of estradiol and 0.5 mg of norethindrone acetate and the following excipients: maize starch, lactose monohydrate, FD&C Yellow No. 6, copovidone, talc and magnesium stearate. Abigale Lo, 0.5 mg/0.1 mg is a single tablet for oral administration containing 0.5 mg of estradiol and 0.1 mg of norethindrone acetate and the following excipients: maize starch, lactose monohydrate, FD&C Yellow No. 6, copovidone, talc and magnesium stearate. Estradiol (E 2 ), is a white or almost white crystalline powder. Its chemical name is estra-1, 3, 5 (10)-triene-3, 17β-diol hemihydrate with the empirical formula of C 18 H 24 O 2 , ½ H 2 O and a molecular weight of 281.4. The structural formula of E 2 is as follows: Norethindrone acetate (NETA) is a white or yellowish-white crystalline powder. Its chemical name is 17β -acetoxy-19-nor-17α -pregn-4-en-20-yn-3-one with the empirical formula of C 22 H 28 O 3 and molecular weight of 340.5. The structural formula of NETA is as follows: Estradiol Structural Formula Norethindrone Acetate Structural Formula
Activella 1 mg/0.5 mg is a single tablet for oral administration containing 1 mg of estradiol and 0.5 mg of norethindrone acetate and the following excipients: lactose monohydrate, starch (corn), copovidone, talc, magnesium stearate, hypromellose and triacetin. Activella 0.5 mg/0.1 mg is a single tablet for oral administration containing 0.5 mg of estradiol and 0.1 mg of norethindrone acetate and the following excipients: lactose monohydrate, starch (corn), hydroxypropylcellulose, talc, magnesium stearate, hypromellose and triacetin. Estradiol is a white or almost white crystalline powder. Its chemical name is estra-1, 3, 5 (10)-triene-3, 17β-diol hemihydrate with the empirical formula of C 18 H 24 O 2 ,1/2; H 2 O and a molecular weight of 281.4. The structural formula of E 2 is as follows: Estradiol Norethindrone acetate (NETA) is a white or yellowish-white crystalline powder. Its chemical name is 17β-acetoxy-19-nor-17α-pregn-4-en-20-yn-3-one with the empirical formula of C 22 H 28 O 3 and molecular weight of 340.5. The structural formula of NETA is as follows: Norethindrone Acetate Estradiol structural formula Norethindrone Acetate structural formula
Angeliq tablets, for oral administration, provide a hormone regimen consisting of drospirenone and estradiol. Drospirenone, (6R,7R,8R,9S,10R,13S,14S,15S,16S,17S)-1,3´,4´,6, 6a,7,8,9,10,11,12,13,14,15,15a,16-hexadecahydro-10,13-dimethylspiro-[17H-dicyclopropa[6,7:15,16]cyclopenta[a]phenanthrene- 17,2´(5H)-furan]-3,5´(2H)-dione (CAS) is a synthetic progestational compound and has a molecular weight of 366.5 and a molecular formula of C 24 H 30 O 3 . Estradiol USP, (Estra-1,3,5(10)-triene-3,17-diol,17ß), has a molecular weight of 272.39 and the molecular formula is C 18 H 24 O 2 . The structural formulas are as follows: The inactive ingredients in Angeliq 0.5 mg DRSP/1 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and red ferric oxide pigment NF. The inactive ingredients in Angeliq 0.25 mg DRSP/0.5 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and yellow ferric oxide pigment NF. Chemical Structure
DIRECTIONS: Apply once or twice a day. Massage into inner arms, thighs, chest or apply to inner forearm and rub arms together or use as directed by your Physician.
USES: This is a topical cream that contains bio-identical estriol and estradiol derived from wild yam and formulated in an 80:20 ratio. When applied to the skin it can help balance your hormones and provide temporary relief from menopausal symptoms such as hot flashes. DIRECTIONS: Apply once or twice a day. Massage into inner arms, thighs, chest or apply to inner forearm and rub arms together or use as directed by your Physician.
USES: This is a topical cream that contains bio-identical estriol and estradiol derived from wild yam and formulated in an 80:20 ratio. When applied to the skin it can help balance your hormones and provide temporary relief from menopausal symptoms such as hot flashes. DIRECTIONS: Apply once or twice a day. Massage into inner arms, thighs, chest or apply to inner forearm and rub arms together or use as directed by your Physician.
BIJUVA (estradiol and progesterone) is an oval shaped opaque capsule in which the estradiol is solubilized and the progesterone is micronized and suspended in the mixture of medium chain mono and di-glycerides and lauroyl polyoxyl-32 glycerides. Each 0.5 mg/100 mg capsule is light pink on one side, dark pink on the other side, and printed with "5C1" in white ink. Each 1 mg/100 mg capsule is light pink on one side, dark pink on the other side, and printed with "1C1" in white ink. Estradiol (estra-1,3,5 (10)-triene-3,17β-diol), an estrogen, has a molecular weight of 272.38, and chemical formula C 18 H 24 O 2 . Progesterone (pregn-4-ene-3, 20-dione) has a molecular weight of 314.47, and chemical formula C 21 H 30 O 2 . The structural formulas are as follows: Estradiol Progesterone Each BIJUVA (estradiol and progesterone) capsule contains the following inactive ingredients: ammonium hydroxide, ethanol, ethyl acetate, FD&C Red #40, gelatin, glycerin, hydrolyzed gelatin, isopropyl alcohol, lauroyl polyoxyl-32 glycerides, lecithin, medium chain mono and di-glycerides, medium chain triglycerides, polyethylene glycol, polyvinyl acetate phthalate, propylene glycol, purified water, and titanium dioxide. Structural Formula Structural Formula
BIJUVA (estradiol and progesterone) is an oval shaped opaque capsule in which the estradiol is solubilized and the progesterone is micronized and suspended in the mixture of medium chain mono and di-glycerides and lauroyl polyoxyl-32 glycerides. Each 0.5 mg/100 mg capsule is light pink on one side, dark pink on the other side, and printed with "5C1" in white ink. Each 1 mg/100 mg capsule is light pink on one side, dark pink on the other side, and printed with "1C1" in white ink. Estradiol (estra-1,3,5 (10)-triene-3,17β-diol), an estrogen, has a molecular weight of 272.38, and chemical formula C 18 H 24 O 2 . Progesterone (pregn-4-ene-3, 20-dione) has a molecular weight of 314.47, and chemical formula C 21 H 30 O 2 . The structural formulas are as follows: Estradiol Progesterone Each BIJUVA (estradiol and progesterone) capsule contains the following inactive ingredients: ammonium hydroxide, ethanol, ethyl acetate, FD&C Red #40, gelatin, glycerin, hydrolyzed gelatin, isopropyl alcohol, lauroyl polyoxyl-32 glycerides, lecithin, medium chain mono and di- glycerides, medium chain triglycerides, polyethylene glycol, polyvinyl acetate phthalate, propylene glycol, purified water, and titanium dioxide. Chemical Structure Chemical Structure
Climara (estradiol transdermal system), is designed to release estradiol continuously upon application to intact skin. Six (6.5, 9.375, 12.5, 15, 18.75 and 25 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 6.5, 9.375, 12.5, 15, 18.75 or 25 cm 2 , and contains 2, 2.85, 3.8, 4.55, 5.7 or 7.6 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The Climara transdermal system comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1. A translucent polyethylene film. 2. An acrylate adhesive matrix containing estradiol USP. 3. A protective liner of siliconized or fluoropolymer-coated polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (acrylate copolymer adhesive, fatty acid esters, and polyethylene backing) are pharmacologically inactive. Chemical Structure Patch Diagram
Climara Pro (estradiol/levonorgestrel transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol and levonorgestrel, a progestational agent, continuously upon application to intact skin. The 22 cm 2 Climara Pro system contains 4.4 mg estradiol and 1.39 mg levonorgestrel and provides a nominal delivery rate (mg per day) of 0.045 estradiol and 0.015 levonorgestrel. Estradiol USP has a molecular weight of 272.39 and the molecular formula is C 18 H 24 O 2 . Levonorgestrel USP has a molecular weight of 312.4 and a molecular formula of C 21 H 28 O 2 . The structural formulas for estradiol and levonorgestrel are: The Climara Pro transdermal system comprises 3 layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1. A translucent polyethylene backing film. 2. An acrylate adhesive matrix containing estradiol and levonorgestrel. 3. A protective liner of either siliconized or fluoropolymer coated polyester film. The protective liner is attached to the adhesive surface and must be removed before the system can be used. The active components of the transdermal system are estradiol and levonorgestrel. The remaining components of the transdermal system (acrylate copolymer adhesive and polyvinylpyrrolidone/vinyl acetate copolymer) are pharmacologically inactive. Chemical structure diagram patch
CombiPatch ® (estradiol/norethindrone acetate transdermal system) is an adhesive-based matrix transdermal patch designed to release both estradiol, an estrogen, and norethindrone acetate (NETA), a progestational agent, continuously upon application to intact skin. Two systems are available, providing the following in vivo delivery rates of estradiol and NETA. 1 NETA=norethindrone acetate. 2 Based on in vivo/in vitro flux data, delivery of both components per day via skin of average permeability (interindividual variation in skin permeability is approximately 20 percent). System Size Estradiol (mg) NETA 1 (mg) Nominal Delivery Rate 2 (mg per day) Estradiol / NETA 9 cm 2 round 0.62 2.7 0.05/0.14 16 cm 2 round 0.51 4.8 0.05/0.25 Estradiol USP (estradiol) is a white to creamy white, odorless, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17 β -diol. The molecular weight of estradiol is 272.39 and the molecular formula is C 18 H 24 O 2 . NETA USP is a white to creamy white, odorless, crystalline powder, chemically described as 17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate. The molecular weight of NETA is 340.47 and the molecular formula is C 22 H 28 O 3 . The structural formulas for estradiol and NETA are: CombiPatch is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film backing, (2) an adhesive layer containing estradiol, NETA, acrylic adhesive, silicone adhesive, oleic acid NF, povidone USP and dipropylene glycol, and (3) a polyester release protective liner, which is attached to the adhesive surface and must be removed before the system can be used. The active components of the system are estradiol USP and NETA USP. The remaining components of the system are pharmacologically inactive. Chemical Structure Layer
Divigel (estradiol gel) 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Divigel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: Divigel Chemical Structure The remaining components of the gel (carbomer, ethanol, propylene glycol, purified water, and triethanolamine) are pharmacologically inactive. Divigel Chemical Structure
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP. 1 2
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
DOTTI (estradiol transdermal system, USP) contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of DOTTI are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. DOTTI is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.
Uses Topical gel, applied to skin
By Active Ingredients
Drugs sharing any active ingredients
HOMEOPATHIC INDICATIONS: For temporary relief of symptoms including anger, hostility, sleep difficulties and fatigue.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.
INDICATIONS: To temporarily relieve symptoms related to aging; tiredness, weakness, excess fat, wrinkled skin, lack of muscle, etc.
INDICATIONS: For temporary relief of exhaustion & restlessness, metallic taste & dyspepsia & menstrual pain.
HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms such as occasional diarrhea, occasional constipation, headaches, gas, congestion, irritated eyes, and indigestion.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.
INDICATIONS: For temporary relief of aches and pains of joints and muscles as a consequence of infection.
this product is a homeopathic dilution,formulated to support the body's immunity for the temporary releif of allergies*
INDICATIONS: May temporarily relieve symptoms of acute or chronic lymphatic congestion, general immune support and lymphatic drainage.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.
HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms of mold toxicity and illness including coughing, wheezing, burning in throat, headache, fatigue, and joint pain.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.
INDICATIONS: May temporarily relieve symptoms associated with reactions to coumarin.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.
Uses For temporary relief of symptoms: Low back, leg, hip, and joint pain Nerve inflammation Numbness and tingling Weakness in back and legs As per various homeopathic materia medicas. Claims based on traditional homeopathic practice, not accepted medical evidence. These uses have not been evaluated by the FDA, and product has not been clinically tested. Reference image: Sciatic Nerve Formula.jpg
INDICATIONS: For the temporary relief of loss of memory, metal weakness, senile dementia, forgetfulness, confusion, anxiety, brain fog, children with slow mental and physical development.
HOMEOPATHIC INDICATIONS: For temporary relief of symptoms related to Mycoplasma Infection including headache, muscle and joint pain and soreness, and nausea.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.
HOMEOPATHIC INDICATIONS: For the temporary relief of symptoms related to Cytomegalovirus including fever, flu-like symptoms, fatigue, rash and chills.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.
INDICATIONS: For temporary relief of abdominal bloating, ear congestion, fatigue, gas, headaches, hay fever, generalized itching, and lower back pain.
INDICATIONS FOR USE: For the temporary relief of symptoms such as: • pain • burning • weakness • sensitivity • tingling • numbness Product indications are based solely on Homeopathic Materia Medica and have not been evaluated by the FDA.
INDICATIONS: For temporary relief of fever, sore throat and acute irritation of the bladder.
INDICATIONS Temporarily relieves stubbornness, intolerance, feeling ungrounded or detached, anger, being overly critical or judgmental, or fear.*
INDICATIONS: For temporary relief of symptoms related to mild radiation exposure including weakness, fatigue, exhaustion, fainting, dehydration and diarrhea.
INDICATIONS Temporarily relieves mood swings, confusion, feeling of inadequacy, jealousy, or self-doubt.*
HOMEOPATHIC INDICATIONS: For temporary relief of sensitivity to wool, including gas, bloating, and headache.** **These statements are based upon traditional homeopathic principles. They have not been reviewed by the Food and Drug Administration.