Drugs Similar to GUANFACINE
GUANFACINE
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2.
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride, USP equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: 1 mg - anhydrous lactose, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. 2 mg - anhydrous lactose, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. Guanfacine hydrochloride chemical structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride, USP equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: 1 mg - anhydrous lactose, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. 2 mg - anhydrous lactose, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. Guanfacine hydrochloride chemical structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3 spl-structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine Extended-Release Tablets are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O•HCl corresponding to a molecular weight of 282.55g/mol. The chemical structure is: Guanfacine HCl is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain copovidone, fumaric acid, glyceryl dibehenate, hypromellose, lactose, methacrylic acid and ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain FD&C Yellow #6 Aluminum Lake. structure
Guanfacine extended-release tablets, USP are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine HCl, USP is a white or almost off-white crystalline powder, soluble in methanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contains fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid-ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain D & C yellow #10 aluminium lake and FD & C blue #1 aluminium lake. Meets USP Dissolution Test 4. Figure 01
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-amidino-2-(2,6-dichlorophenyl) acetamide hydrochloride and its molecular weight is 282.56. Its structural formula is: Guanfacine hydrochloride, USP is a white or off-white crystalline powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg of guanfacine and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. In addition, the 2 mg tablets contain the following ingredient: FD&C Blue No. 1 Aluminum Lake. Chemical Structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine Extended-Release Tablets, USP are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O•HCl corresponding to a molecular weight of 282.55 g/mol. The chemical structure is: Guanfacine HCl is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain copovidone, fumaric acid, glyceryl dibehenate, hypromellose, lactose, methacrylic acid and ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain FD&C Yellow #6 Aluminum Lake. FDA approved dissolution test specifications differ from USP. structure
Guanfacine extended-release tablets, USP is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 C l2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains Guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain hypromellose, methacrylic acid copolymer, lactose monohydrate, povidone, crospovidone, microcrystalline cellulose, colloidal silicon dioxide, fumaric acid, and glyceryl dibehenate. In addition, the 3-mg and 4-mg tablets also contain ferric oxide and FD&C Blue 2 Al lake. FDA approved dissolution test specifications differ from USP. image description
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
By Generic Name
Drugs with the same generic name (different brands)
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. Structural Formula
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine Tablets, USP are centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-amidino-2-(2,6-dichlorophenyl) acetamide hydrochloride and its molecular weight is 282.56. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. The inactive ingredients in each tablet are crospovidone, fumaric acid, lactose monohydrate, magnesium stearate, pregelatinized maize starch. Additionally 1 mg tablet contains FD & C blue 1 Alu lake. FDA approved dissolution test specifications differ from USP. Image
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. Structural Formula
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2.
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride, USP equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: 1 mg - anhydrous lactose, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. 2 mg - anhydrous lactose, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. Guanfacine hydrochloride chemical structure
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. The 2 mg tablet also contains D&C Yellow #10 Aluminum Lake. Structural Formula
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. The 2 mg tablet also contains D&C Yellow #10 Aluminum Lake. Structural Formula
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2.
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine extended-release tablets, USP are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine HCl, USP is a white or almost off-white crystalline powder, soluble in methanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contains fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid-ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain D & C yellow #10 aluminium lake and FD & C blue #1 aluminium lake. Meets USP Dissolution Test 4. Figure 01
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine extended-release tablets, USP are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine HCl, USP is a white or almost off-white crystalline powder, soluble in methanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contains fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid-ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain D & C yellow #10 aluminium lake and FD & C blue #1 aluminium lake. Meets USP Dissolution Test 4. Figure 01
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP.
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride, USP equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: 1 mg - anhydrous lactose, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. 2 mg - anhydrous lactose, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. Guanfacine hydrochloride chemical structure
By Substance
Drugs sharing the same substance name
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP.
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride, USP equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: 1 mg - anhydrous lactose, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. 2 mg - anhydrous lactose, D&C Yellow #10 Aluminum Lake, FD&C Red #40 Aluminum Lake, microcrystalline cellulose, povidone, stearic acid. Guanfacine hydrochloride chemical structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain methacrylic acid and ethyl acrylate copolymer, hypromellose, glyceryl dibehenate, microcrystalline cellulose, lactose monohydrate, fumaric acid, talc, silicon dioxide and magnesium stearate. In addition, the 3 mg and 4 mg tablets also contain FD&C Blue #2 Aluminum Lake and iron oxide yellow. FDA approved dissolution test specifications differ from USP. structure
Guanfacine extended-release tablets, USP is a once-daily, extended-release formulation of guanfacine hydrochloride, USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 C l2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains Guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain hypromellose, methacrylic acid copolymer, lactose monohydrate, povidone, crospovidone, microcrystalline cellulose, colloidal silicon dioxide, fumaric acid, and glyceryl dibehenate. In addition, the 3-mg and 4-mg tablets also contain ferric oxide and FD&C Blue 2 Al lake. FDA approved dissolution test specifications differ from USP. image description
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. The 2 mg tablet also contains D&C Yellow #10 Aluminum Lake. Structural Formula
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine Extended-Release Tablets are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O•HCl corresponding to a molecular weight of 282.55g/mol. The chemical structure is: Guanfacine HCl is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain copovidone, fumaric acid, glyceryl dibehenate, hypromellose, lactose, methacrylic acid and ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain FD&C Yellow #6 Aluminum Lake. structure
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-amidino-2-(2,6-dichlorophenyl) acetamide hydrochloride and its molecular weight is 282.56. Its structural formula is: Guanfacine hydrochloride, USP is a white or off-white crystalline powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg of guanfacine and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. In addition, the 2 mg tablets contain the following ingredient: FD&C Blue No. 1 Aluminum Lake. Chemical Structure
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. Structural Formula
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2.
Guanfacine hydrochloride, USP is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride, USP is N -Amidino- 2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride, USP is a white to off-white powder; sparingly soluble in water and alcohol and very slightly soluble in acetone. The tablets contain the following inactive ingredients: 1 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. 2 mg—Anhydrous citric acid, microcrystalline cellulose, pregelatinized starch, stearic acid. Guanfacine tablets meets USP Dissolution Test 2. structure
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3 spl-structure
Guanfacine extended-release tablets, USP are a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine HCl, USP is a white or almost off-white crystalline powder, soluble in methanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contains fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid-ethyl acrylate copolymer, microcrystalline cellulose, polysorbate 80 and sodium lauryl sulfate. In addition, the 3-mg and 4-mg tablets also contain D & C yellow #10 aluminium lake and FD & C blue #1 aluminium lake. Meets USP Dissolution Test 4. Figure 01
Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is: C 9 H 9 Cl 2 N 3 O•HCl M.W. 282.55 Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake. The following chemical structure of Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (greater than 30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base.
Guanfacine is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), USP in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride. The molecular formula is C 9 H 9 Cl 2 N 3 O·HCl corresponding to a molecular weight of 282.55. The chemical structure is: Guanfacine hydrochloride, USP is a white or almost white crystalline powder, sparingly soluble in water, methanol and ethanol. Each tablet contains guanfacine HCl equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, fumaric acid, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, and povidone. In addition, the 3 mg and 4 mg tablets also contain FD&C blue #2/indigo carmine aluminum lake and ferric oxide yellow. Meets USP dissolution test 3
Guanfacine hydrochloride is a centrally acting antihypertensive with α 2 -adrenoceptor agonist properties in tablet form for oral administration. The chemical name of guanfacine hydrochloride is N-Amidino-2-(2,6-dichlorophenyl) acetamide monohydrochloride and its molecular weight is 282.55. Its structural formula is: Guanfacine hydrochloride is a white to off-white powder; sparingly soluble in water and alcohol and slightly soluble in acetone. Each tablet, for oral administration, contains guanfacine hydrochloride equivalent to 1 mg or 2 mg guanfacine. The tablets contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, partially pregelatinized starch, magnesium stearate and talc. Structural Formula
Guanfacine extended-release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl), in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is: C 9 H 9 Cl 2 N 3 O•HCl M.W. 282.55 Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (greater than 30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake. The following chemical structure of Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in ace