Drugs Similar to TRI-LUMA

ALTRENO (tretinoin) lotion is an opaque, pale yellow lotion containing 0.05% tretinoin by weight for topical administration. Chemically, tretinoin is all-trans-retinoic acid, also known as (all-E)-3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid class of compounds and a metabolite of vitamin A. Tretinoin has the following chemical structure: Molecular Formula: C 20 H 28 O 2 Molecular Weight: 300.44 Each gram of ALTRENO contains 0.5 mg (0.05%) of tretinoin in an opaque, pale yellow lotion base consisting of benzyl alcohol, butylated hydroxytoluene, carbomer copolymer type B (Pemulen TR-1), carbomer homopolymer type A (Carbopol 981), glycerin, methylparaben, mineral oil, octoxynol-9, purified water, sodium hyaluronate, soluble collagen and trolamine. chemstructure.jpg

Atralin (tretinoin) Gel, 0.05% is a translucent to opaque, pale yellow gel containing 0.05% tretinoin, by weight for topical administration. Chemically, tretinoin is all- trans -retinoic acid, also known as (all- E )-3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid class of compounds, and a metabolite of Vitamin A. Tretinoin has a molecular weight of 300.44, a molecular formula of C 20 H 28 O 2 and the following structure: Each gram of Atralin Gel, 0.05% contains 0.5 mg of tretinoin. Other components of this formulation are benzyl alcohol, butylparaben, butylated hydroxytoluene, carbomer homopolymer Type C, ethylparaben, fish collagen hydrolyzates, glycerin, isobutylparaben, methylparaben, octoxynol 9, phenoxyethanol, propylparaben, purified water, sodium hyaluronate, and trolamine. The contribution to efficacy of individual components of the vehicle has not been evaluated. chem.jpg

USES: • For the temporary relief of symptoms including: • metabolism support • fatigue • weakened constitution These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

Clindamycin Phosphate 1.2% and Tretinoin 0.025% Gel is an antibiotic and retinoid combination gel product with two active ingredients. Clindamycin phosphate is a water-soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below: Clindamycin phosphate: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 The chemical name for tretinoin is 3,7-Dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8 nonatetraenoic acid (all- trans form). The structural formula for tretinoin is represented below: Tretinoin: Molecular Formula: C 20 H 28 O 2 Molecular Weight: 300.44 Clindamycin Phosphate 1.2% and Tretinoin 0.025% Gel contains the following inactive ingredients: butylated hydroxytoluene NF, carbomer 981 NF, citric acid USP, edetate disodium USP, glycerin USP, methylparaben NF, polysorbate 80 NF, propylparaben NF, purified water USP and tromethamine USP. Chemical Structure Chemical Structure

Clindamycin phosphate and tretinoin gel 1.2% / 0.025%, is an antibiotic and retinoid combination gel product with two active ingredients. Clindamycin phosphate, USP is a water-soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate, USP is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4- propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate, USP is represented below: Clindamycin phosphate, USP: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 The chemical name for tretinoin, USP is 3,7-Dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8- nonatetraenoic acid (all- trans form). The structural formula for tretinoin, USP is represented below: Tretinoin, USP: Molecular Formula: C 20 H 28 O 2 Molecular Weight: 300.44 Clindamycin phosphate and tretinoin gel 1.2% / 0.025% contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, edetate disodium, hydroxyethyl cellulose, glycerin, methylparaben, polysorbate 80, propylparaben, purified water, tromethamine and xanthan gum. 12f9b5a2-figure-01 12f9b5a2-figure-02

Clindamycin phosphate and tretinoin gel, 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 The chemical name for tretinoin is all-trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below: Molecular Formula: C 20 H 28 O 2 Molecular Weight: 300.44 Clindamycin phosphate and tretinoin gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine. structure1 structure2

Clindamycin phosphate and tretinoin gel 1.2%/0.025%, is a fixed combination of 2 solubilized active ingredients in an aqueous-based gel. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 The chemical name for tretinoin is all- trans 3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. It is a member of the retinoid family of compounds. The structural formula for tretinoin is represented below: Molecular Formula: C 20 H 28 O 2 Molecular Weight: 300.44 Clindamycin phosphate and tretinoin gel contains the following inactive ingredients: anhydrous citric acid, butylated hydroxytoluene, carbomer homopolymer (type C), edetate disodium, laureth 4, methylparaben, propylene glycol, purified water, and tromethamine. str-clinda str-treti

DERMA-SMOOTHE/FS Scalp Oil (fluocinolone acetonide) topical oil, 0.01% contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1–methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of DERMA-SMOOTHE/FS Scalp Oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil and fragrances. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. DERMA-SMOOTHE/FS Scalp Oil is formulated with 48% refined peanut oil. The bulk refined peanut oil used in DERMA-SMOOTHE/FS Scalp Oil is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in DERMA-SMOOTHE/FS Scalp Oil is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm). Chemical Structure

Derma-Smoothe/FS ® (fluocinolone acetonide), Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Derma-Smoothe/FS ® (fluocinolone acetonide), Topical Oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Derma-Smoothe/FS ® has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Derma-Smoothe/FS ® contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil NF and fragrances. Derma-Smoothe/FS ® is formulated with 48% refined peanut oil NF. The peanut oil used in Derma-Smoothe/FS ® is tested for peanut proteins through amino acid analysis which can detect the quantity of amino acids to below 0.5 parts per million. Chemical Structure

DERMOTIC OIL (fluocinolone acetonide) 0.01% ear drops contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16, 17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of DERMOTIC OIL contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil and fragrances. DERMOTIC OIL is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in DERMOTIC OIL is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in DERMOTIC OIL is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm). Chemical Structure

Flac ® Oil Ear Drops contain fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. This formulation is also marketed as fluocinolone acetonide oil, 0.01% (body oil) for the treatment of atopic dermatitis and fluocinolone acetonide oil, 0.01% (scalp oil) for the treatment of psoriasis of the scalp. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Chemical Structure

Fluocinolone acetonide topical oil, 0.01% (body oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6, 9-difluoro-11, 21-dihydroxy-16, 17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (scalp oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% (ear drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (body oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% (body oil) is formulated with 48% refined peanut oil NF.

Fluocinolone Acetonide Ointment USP, 0.025% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Ointment USP, 0.025% contains 0.25 mg/g of fluocinolone acetonide USP in a white petrolatum USP vehicle. Structure

Fluocinolone acetonide topical oil, 0.01% (scalp oil) contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as fluocinolone acetonide oil, 0.01% (ear drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (scalp oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contain isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.

Fluocinolone acetonide topical oil, 0.01% (body oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6, 9-difluoro-11, 21-dihydroxy-16, 17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (scalp oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% (ear drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (body oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% (body oil) is formulated with 48% refined peanut oil NF.

Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Fluocinolone acetonide topical oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide topical oil is heated just below 232°C (450°F) for at least 15 minutes. Structural Formula

Fluocinolone acetonide Scalp Oil, 0.01% contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide, 0.01% for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide scalp oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide scalp oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Chemical Structure

Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide USP (Pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α,11β,16α)-); it has an empirical formula of C 24 H 30 F 2 O 6 and a molecular weight of 425.49. Each mL of the topical solution contains 0.1 mg fluocinolone acetonide in a water-washable base containing propylene glycol and citric acid. chemical-structure

Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Chemical Structure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Fluocinolone Acetonide is included in this class of synthetic corticosteroids. Chemically Fluocinolone Acetonide is Pregna-1,4-diene-3,20-dione, 6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11β, 6α)-), with the molecular formula C 24 H 30 F 2 0 6 , a molecular weight of 452.49 and the following structural formula: Each gram of Fluocinolone Acetonide Cream, USP 0.01% contains 0.1 mg fluocinolone acetonide USP in a water washable cream base consisting of mineral oil (and) lanolin alcohols, isopropyl palmitate NF, propylene glycol stearate, cetyl alcohol NF, sorbitan monostearate NF, polysorbate 60 NF, sorbic acid NF, polyoxyl (40) stearate NF, purified water USP, propylene glycol USP with propylparaben NF and methylparaben NF as preservatives. Each gram of Fluocinolone Acetonide Ointment, USP 0.025% contains 0.25 mg of fluocinolone acetonide USP in an ointment base consisting of light mineral oil NF and white petrolatum USP. Chemical Structure