Drugs Similar to SUNBURNT PLUS

Uses Temporarily relieves pain and itching due to: sunburn minor burns insect bites minor skin irritations minor cuts scrapes

Uses for the temporary relief of pain and itching associated with • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations

​Uses Temporary pain relief associated with minor burns

Uses: For the temporary relief of pain and itching.

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. structural formula lidocaine hydrochloride

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS for specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Structural Formula

Use For the temporary relief of pain and discomfort associated with anorectal disorders.

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Minor Cuts & Scrapes Insect Bites

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Cuts & Scrapes Insect Bites

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Bums Minor Skin Irritation Cuts & Scrapes Insect Bites

USES TEMPORARY PAIN ASSOCIATED WITH MINOR BURNS

Uses For temporary relief of pain and itching.

Uses For the temporary relief of pain and itching associated with minor burns, sunburn, insect bites, or minor skin irritations.

Use temporarily relieves minor pain

Use for the temporary relief of pain

Use for the temporary relief of pain

Use temporarily relieves minor pain

Uses temporarily relieves minor pain

Uses for temporary relief of pain associated with - minor burns - sunburn - minor cuts or scrapes - minor skin irritations

Uses For the temporary relief of pain and itching associated with minor burns, sunburn, minor cuts, scrapes, insect bites or minor skin irritations.

Uses For temporary relief of pain and discomfort

Uses for the temporary relief of pain and itching associated with • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Use(s) For the temporary relief of pain associated with minor burns

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

​Uses Temporary pain relief associated with minor burns

Use(s) For temporary relief of pain and itching associated with: • Sunburn • Minor burns • Insect bites • Cuts • Scrapes

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Availability Structure

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE

Uses Uses For temporary relief of minor aches & pains of muscles & joints associated with: simple backache arthritis strains bruises sprains

Uses Uses For temporary relief of pain

Uses: For the temporary relief of pain and itching.

Uses for the temporary relief of pain and itching associated with cold sores and fever blisters Relieves dryness and softens cold sores and fever blisters Softens crust (scabs) associated with cold sores and fever blisters

USE for the temporary relief of pain

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. structural formula lidocaine hydrochloride

Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS for specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Structural Formula

Use For the temporary relief of pain and discomfort associated with anorectal disorders.

Uses Provides temporary relief from pain and itching caused by sunburns, minor cuts, insect bites, and skin irritations.

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Minor Cuts & Scrapes Insect Bites

Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Cuts & Scrapes Insect Bites

Use • For the temporary relief of pain

Uses: For the temporary relief of pain and/or itching associated with minor burns, sunburn, minor cuts, scrapes, insect bites or minor skin irritations.

Uses: For the temporary relief of pain and/or itching associated with minor burns, sunburn, minor cuts, scrapes, insect bites or minor skin irritations.

Use For temporary relief of minor aches and pains of muscles and joints.

Use Use for temporary relief of minor pain

Duloxetine delayed-release capsules USP are selective serotonin and norepinephrine reuptake inhibitor SNRI for oral administration. Its chemical designation is (+)-( S )- N -methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C 18 H 19 NOS•HCl, which corresponds to a molecular weight of 333.88. The structural formula is: Duloxetine hydrochloride is a white to cream colored powder, which is soluble in methanol. Each capsule contains enteric-coated mini tablets comprising of duloxetine hydrochloride equivalent to 20, 30, 40 or 60 mg of duloxetine, respectively. These enteric-coated mini tablets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonia solution, black iron oxide, croscarmellose sodium, FD & C Blue 2, gelatin, hypromellose, hypromellose phthalate, lactose monohydrate, magnesium stearate, polysorbate 80, potassium hydroxide, pregelatinized starch, propylene glycol, shellac, sodium lauryl sulphate, talc, titanium dioxide and triethyl citrate. The 20 and 60 mg capsules also contain iron oxide yellow. Structure

Uses For the temporary relief of pain