Drugs Similar to FLUNISOLIDE

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of Flunisolide Nasal Solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each mL contains: ACTIVE: Flunisolide 0.25 mg (0.025%); INACTIVES: Butylated Hydroxyanisole, Citric Acid, Edetate Disodium Dihydrate, Polyethylene Glycol 3350, Propylene Glycol, Purified Water, and Sodium Citrate. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1–5.4). PRESERVATIVE: Benzalkonium Chloride 0.01%. C24H31FO6 Chemical Name

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of flunisolide nasal solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-di-ene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each 25 mL flunisolide nasal solution spray bottle contains 6.25 mg (0.25 mg/mL). Each mL Contains: ACTIVE : Flunisolide 0.25 mg (0.025%); INACTIVES : Propylene Glycol, Polyethylene Glycol 3350, Butylated Hydroxyanisole, Edetate Disodium, Sodium Citrate, Citric Acid, and Purified Water. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1 – 5.4). PRESERVATIVE : Benzalkonium Chloride 0.01%. Flunisolide (Structural formula)

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of flunisolide nasal solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-di-ene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each 25 mL flunisolide nasal solution spray bottle contains 6.25 mg (0.25 mg/mL). Each mL Contains: ACTIVE : Flunisolide 0.25 mg (0.025%); INACTIVES : Propylene Glycol, Polyethylene Glycol 3350, Butylated Hydroxyanisole, Edetate Disodium, Sodium Citrate, Citric Acid, and Purified Water. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1 – 5.4). PRESERVATIVE : Benzalkonium Chloride 0.01%. Flunisolide (Structural formula)

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of Flunisolide Nasal Solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each mL contains: ACTIVE: Flunisolide 0.25 mg (0.025%); INACTIVES: Butylated Hydroxyanisole, Citric Acid, Edetate Disodium Dihydrate, Polyethylene Glycol 3350, Propylene Glycol, Purified Water, and Sodium Citrate. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1–5.4). PRESERVATIVE: Benzalkonium Chloride 0.01%. C24H31FO6 Chemical Name

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of flunisolide nasal solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-di-ene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each 25 mL flunisolide nasal solution spray bottle contains 6.25 mg (0.25 mg/mL). Each mL Contains: ACTIVE : Flunisolide 0.25 mg (0.025%); INACTIVES : Propylene Glycol, Polyethylene Glycol 3350, Butylated Hydroxyanisole, Edetate Disodium, Sodium Citrate, Citric Acid, and Purified Water. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1 – 5.4). PRESERVATIVE : Benzalkonium Chloride 0.01%. Flunisolide (Structural formula)

Flunisolide Nasal Solution USP, 0.025% is intended for administration as a spray to the nasal mucosa. Flunisolide, the active component of Flunisolide Nasal Solution, is an anti-inflammatory steroid. Flunisolide is represented by the following structural formula: C 24 H 31 FO 6 Mol. Wt. 434.51 Chemical Name: 6α-fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone (USAN). Flunisolide is a white to creamy white crystalline powder. It is soluble in acetone, sparingly soluble in chloroform, slightly soluble in methanol, and practically insoluble in water. It has a melting point of about 245°C. After initial priming (5 to 6 sprays), each spray of the unit delivers a metered droplet spray of 100 mg formulation containing 25 mcg of flunisolide. The size of the droplets produced by the unit is in excess of 8 microns to facilitate deposition on the nasal mucosa. The contents of one nasal spray bottle delivers 200 sprays. Each mL contains: ACTIVE: Flunisolide 0.25 mg (0.025%); INACTIVES: Butylated Hydroxyanisole, Citric Acid, Edetate Disodium Dihydrate, Polyethylene Glycol 3350, Propylene Glycol, Purified Water, and Sodium Citrate. Sodium Hydroxide and/or Hydrochloric Acid may be added to adjust pH (5.1–5.4). PRESERVATIVE: Benzalkonium Chloride 0.01%. C24H31FO6 Chemical Name