Drugs Similar to XYLOCAINE- MPF (LIDOCAINE HCL )
LIDOCAINE HCL
Related medications based on brand, generic name, substance, active ingredients.
By Generic Name
Drugs with the same generic name (different brands)
Uses Provides temporary relief from pain and itching caused by sunburns, minor cuts, insect bites, and skin irritations.
Uses for the temporary relief of pain and itching associated with minor burns sunburn minor cuts scrapes insect bites minor skin irritations
Uses for the temporary relief of pain associated with minor burns
Use Temporarily relieves minor pains
Use temporarily relieves minor pain
Use for the temporary relief of pain
USES For the temporary relief of pain and itching.
Uses For the temporary relief of pain and itching associated with sunburns, minor cuts, insect bites, and skin irritations
Uses for the temporary relief of pain and itching associated with minor burns sunburn minor cuts scrapes insect bites minor skin irritations
Uses: For temporary relief of pain and itching due to • sunburn • minor burns • insect bites • minor cuts • scrapes • minor skin irritation
Uses • For the temporary relief of pain associated with minor burns, sunburn, scrapes, or minor skin irritations.
Uses temporarily relieves minor pain
Uses For the temporary relief of pain and itching associated with sunburn, minor burns, minor cuts, scrapes, insect bites & minor skin irritations.
Uses temporarily relieves pain and itching due to: minor burns sunburn minor cuts scrapes insect bites minor skin irritations
Adults and children 2 years and older: apply to the affected area, not more than 3 to 4 times a day. Children under 2 years of age: consult a physician. To apply to face, squeeze into palm of hand and gently apply.
Uses For temporary relief of pain and itching associated with minor cuts or minor skin irritations.
Uses For temporary relief of pain and itching associated with minor cuts or minor skin irritations.
Uses temporarily relieves minor pain
Use Temporarily relieves minor pains
Uses For the temporary relief of pain and itching associated with sunburns, minor cuts, insect bites, and skin irritations
By Substance
Drugs sharing the same substance name
Uses For the temporary relief of pain due to minor burns, sunburns, minor cuts, scrapes, or minor skin irritations
AKTEN (lidocaine hydrochloride ophthalmic gel) 3.5% contains lidocaine hydrochloride, an amide local anesthetic, as a sterile ophthalmic gel for topical ophthalmic use. AKTEN does not contain an anti-microbial preservative. Lidocaine hydrochloride is designated chemically as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl) monohydrochloride with a molecular formula of C 14 H 22 N 2 O ∙ HCl and molecular weight of 270.8. The structural formula of the active ingredient is: Each mL of AKTEN contains 35 mg of lidocaine hydrochloride as the active ingredient. Inactive ingredients: hypromellose, sodium chloride, and water for injection. The pH may be adjusted to 5.5 to 7.5 with hydrochloric acid and/or sodium hydroxide. AKTEN does not contain an anti-microbial preservative. Chemical Structure
Uses Temporary relief of pain associated with minor cuts, scrapes, and burns. Helps protect against harmful bacteria.
Uses Temporary relief of pain assocoated with minor cuts, scrapes, and burns. Helps protect against harmful bacteria
GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. GLYDO (lidocaine HCl jelly, USP) 2% is available in 6 mL and 11 mL single-dose prefilled syringes. Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0. Structural Formula
GLYDO (lidocaine HCl jelly, USP) 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). GLYDO (lidocaine HCl jelly, USP) 2% contains lidocaine HCl which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: GLYDO (lidocaine HCl jelly, USP) 2% also contains hypromellose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. GLYDO (lidocaine HCl jelly, USP) 2% is available in 6 mL and 11 mL single-dose prefilled syringes. Each mL contains 20 mg of lidocaine HCl. The formulation also contains hypromellose, and sodium hydroxide to adjust pH to 6.0 to 7.0. structure
USES ■ temporarily relieves pain and itching due to cold sores or fever blisters ■ temporarily relieves dryness; softens crusts (scabs) due to cold sores or fever blisters ■ first aid to help prevent infection in minor cuts, scrapes or burns due to cold sores or fever blisters
Lidocaine Hydrochloride and 5% Dextrose Injection USP is a sterile, nonpyrogenic solution prepared from lidocaine hydrochloride and dextrose in water for injection. Lidocaine hydrochloride is designated chemically as 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride. The solution serves as a cardiac antiarrhythmic agent intended for intravenous use. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector. Refer to the Directions for Use of the container. DESCRIPTION
Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O • HCl) has the following structural formula: Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula: Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. STRUCTURE 1 STRUCTURE 2
Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O • HCl) has the following structural formula: Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula: Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. STRUCTURE 1 STRUCTURE 2
Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS & USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O • HCl) has the following structural formula: Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula: Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. STRUCTURE 1 STRUCTURE 2
Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent with epinephrine and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine Hydrochloride and Epinephrine Injection, USP solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14 H 22 N 2 O • HCl) has the following structural formula: Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9 H 13 NO 3 ) has the following structural formula: Lidocaine Hydrochloride and Epinephrine Injection, USP is a single-dose solution that is M ethyl P araben (Preservative) F ree (MPF). Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. structure 1 Epinephrine Chemical Structure
Temporarily shrinks hemorrhoidal tissue Temporarily reduces the swelling and irritation associated with hemorrhoids and other anorectal disorders aids in protecting irritated anorectal areas Temporarily shrinks hemorrhoidal tissue. Temporarily reduces the swelling and irritation associated with hemorrhoids and other anorectal disorders. Aids in protecting irritated anorectal areas.
Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION.
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. lidocainestructure
Lidocaine Hydrochloride Oral Topical Solution, USP, 2% (viscous) contains a local anesthetic agent and is administered topically. Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. COMPOSITION OF SOLUTION Each mL contains 20 mg of lidocaine HCl, wild cherry flavor, methylparaben, propylparaben, saccharin sodium, sodium carboxymethylcellulose, and sodium hydroxide in purified water. The pH is adjusted to 5.0 to 7.0 with hydrochloric acid and/or sodium hydroxide. image description
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride (C14H22N2O •HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Formula1,jpg
Lidocaine Hydrochloride Oral Topical Solution, USP (Viscous) 2% contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution, USP (Viscous) 2% contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N- (2,6 dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. Chemical Structure
Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION. structural formula
Lidocaine Hydrochloride Oral Topical Solution, USP, 2% (viscous) contains a local anesthetic agent and is administered topically. Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. COMPOSITION OF SOLUTION Each mL contains 20 mg of lidocaine HCl, wild cherry flavor, methylparaben, propylparaben, saccharin sodium, sodium carboxymethylcellulose, and sodium hydroxide in purified water. The pH is adjusted to 5.0 to 7.0 with hydrochloric acid and/or sodium hydroxide. image description