Drugs Similar to LIDOCAINE PAIN RELIEF ROLL-ON
LIDOCAINE 4%
Related medications based on brand, generic name, substance, active ingredients.
By Brand
Drugs with the same brand name or brand family
For temporarily relief of pain and itching.
By Generic Name
Drugs with the same generic name (different brands)
For temporary relief of pain
Uses For the temporary relief of pain.
Use For the temporary relief of pain
Uses temporarily relieves pain and itching due to: minor cuts minor scrapes sunburn minor skin irritations minor burns insect bites
Use temporarily relieves minor pain
Uses Temporarily relieves pain due to: sunburns, burns, insect bites, and itching.
Use Temporarily relieves minor pain.
Use for the temporary relief of pain
Adults and children 2 years and older: apply to the affected area, not more than 3 to 4 times a day. Children under 2 years of age: consult a physician. To apply to face, squeeze into palm of hand and gently apply.
Temporarily Relieves Minor Pain
Uses: For temporary relief of local discomfort, itching, pain, sorenessor burning in the perianal area associated with anorectal disorders
USES Temporarily relieves minor pain
USES Temporarily relieves minor pain
Use For temporariry relief of pain.
Use For temporariry relief of pain.
Use Temporarily relief of pain.
Uses for temporary relief of pain and itching associated with: minor burns sunburn minor cuts scrapes insect bites minor skin irritations rashes due to poison ivy, poison oak or poison sumac
Use Temporarily relieves minor pain.
Use Temporarily relieves minor pain.
Use Temporarily relieves minor pain.
By Substance
Drugs sharing the same substance name
Uses for the temporary relief of pain and itching associated with • minor burns • sunburn • minor cuts • scrapes • insect bites • minor skin irritations
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE
Use(s) For the temporary relief of pain associated with minor burns
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE
Uses Temporary pain relief associated with minor burns
Use(s) For temporary relief of pain and itching associated with: • Sunburn • Minor burns • Insect bites • Cuts • Scrapes
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. DESCRIPTION STRUCTURE
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Availability Structure
Uses Uses For temporary relief of minor aches & pains of muscles & joints associated with: simple backache arthritis strains bruises sprains
Uses Uses For temporary relief of pain
Uses: For the temporary relief of pain and itching.
Uses for the temporary relief of pain and itching associated with cold sores and fever blisters Relieves dryness and softens cold sores and fever blisters Softens crust (scabs) associated with cold sores and fever blisters
USE for the temporary relief of pain
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. structural formula lidocaine hydrochloride
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS for specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O • HCl) has the following structural formula: Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Structural Formula
Use For the temporary relief of pain and discomfort associated with anorectal disorders.
Uses Provides temporary relief from pain and itching caused by sunburns, minor cuts, insect bites, and skin irritations.
Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Minor Cuts & Scrapes Insect Bites
Uses For the temporary relief of pain and itching associated with: Sunburn Minor Skin Irritation Minor Burns Cuts & Scrapes Insect Bites
By Active Ingredients
Drugs sharing any active ingredients
For the temporary relief of pain.
Temporarily relieves muscle soreness and minor joint pains in the wrist, knees, back, neck, hips, shoulders, elbows.
temporarily relieves minor pain
Use for the temporary relief of pain
Temporarily Relieves Minor Pain
Uses Temporary relief from minor aches and pains of muscles and joints associated with arthritis, simple backache, strains and sprains
Uses Temporary Relief of pain and itching due to: sunburn, scrapes, insect bites, minor skin irritations
For the temporary relief of palin, TOPICAL ANESTHETIC
Uses Temporarily protects the inflamed, irritated anorectal surface to help make bowel movements less painful from irritation and abrasion during bowl movement. For the temporary relief of pain, soreness, or burning Helps relieve the local or anorectal itching and discomfort associated with hemorrhoids
To Apply Peel apart Remove one side of film Place on affected area Remove remaining film Press patch gently Dist. by: Telebrands Corp. 79 Two Bridges Road, Fairfield, NJ 07004 For more information, visit www.Hempvana.com *This Hempvana branded product does not contain any ingredients from the hemp plant.
For the temporary relief of pain
Adults and children 12 years of age and over: clean and dry affected area remove film from patch and apply to the skin apply 1 patch at a time to affected area, not more than 3 to 4 times daily patch should not be applied longer than an 8 hour period Children under 12 years of age: consult a doctor
For temporarily relieve local discomfort, itching, pain, soreness or burning sensation on hands, legs, back and other skin.
For the temporary relief of minor aches and pains of muscles and joints, associated with simple backache, arthritis, strains, bruises, and sprains.
Temporarily relieves minor pain.
Use Temporarily relieves minor paln.
For temporary relief of pain
Use Temperarily relicwes miner pain.
For the temporay relief of pain
Temporarily relieves pain and itching due to: Tattoo procedures Minor scrapes, Minor cuts, Minor skin irritations, Tattoo Laser Removal