Drugs Similar to REOGANIC EX WHITENING PORE CARE DEODORANT
ARBUTIN NIACINAMIDE ADENOSINE
Related medications based on brand, generic name, substance, active ingredients.
By Substance
Drugs sharing the same substance name
Effect: with a refreshing andradiant texture,it has a delicatetouch thatiseasy toandst oothabsorb .ltreplenishesthenecessanmoistureandnutrients for the skin,improvesdryness ,wrinkles and firming.reduces fine lines,providesintensivecare,lifts and solidifiesthe skin leaving it soft,smooth.and radiant with youthfulradiance
Use Use to Regrow Hair on Scalp and Beard
Use: To regrow hair of scalp and beard
Use: To regrow hair of scalp and beard
Use to Regrow Hair on Scalpand Beard
Use shake well before use, take an appropriate amount of the product and apply it evenly to the facial skin. Gently massage until absorbed.
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 M.W. 267.24 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. The TopPac ® plastic syringe is molded from a specially formulated cyclo olefin copolymer. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins. structure
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structural-formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic solution of adenosine USP 3 mg/mL and sodium chloride USP 9 mg/mL in water for injection, USP with pH between 4.5 and 7.5. structure
Adenosine, USP is an endogenous nucleoside and is chemically described as 6-Amino-9- β -D-ribofuranosyl- 9H -purine. Adenosine, USP has the following structural formula: The molecular formula for adenosine, USP is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Adenosine injection, USP is a sterile, non-pyrogenic, clear, colorless solution for intravenous use. Each mL of adenosine injection, USP contains adenosine USP, 3 mg and sodium chloride 9 mg in water for injection q.s. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine, USP is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine, USP is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine, USP is not chemically related to other antiarrhythmic drugs. Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride in water for injection, USP. The pH of the solution is between 4.5 and 7.5. structural formula
Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine. Adenosine has the following structural formula: The molecular formula for adenosine is C 10 H 13 N 5 O 4 and its molecular weight is 267.24. Adenosine USP is a white or almost white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, non-pyrogenic, clear colorless solution of adenosine USP 3 mg/mL and sodium chloride 9 mg/mL in water for injection, with pH between 4.5 and 7.5. Adenosine Chemical Structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Adenosine-structure
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: C 10 H 13 N 5 O 4 267.25 Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection, USP is a sterile solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine, USP and 9 mg sodium chloride, USP in water for injection, USP. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. formula1.jpg
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in Water for Injection. The pH of the solution is between 4.5 and 7.5. Structural Formula
Adenosine is an endogenous nucleoside occurring in all cells of the body. It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula: Adenosine is a white crystalline powder. It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH. Adenosine is not chemically related to other antiarrhythmic drugs. Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection. Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection. The pH of the solution is between 4.5 and 7.5. STRUCTURE
By Active Ingredients
Drugs sharing any active ingredients
After cleansing, apply your skin softner. Apply an appropriate amount FILL PLUS along your face skin's texture. After 10 to 15 minutes with the FILL PLUS on your face and Finish with your lotion or cream.
Indication & Usage Directions ■ Pour some on the palm of your hand and apply to skin gently. ■ Take appropriate amount according to your skin condition and apply every morning and night. ■ Gently tap the skin with fingers for complete absorption. ■ For the best results, use with Suyan Cheongsoo(Toner) and Suyan Jeongbaek(Cream). ■ Children under 6 months: ask a doctor.
Gently press cushion using a puff and pat evenly on skin. Can be used when applying touch up.
Summary not available yet.
apply proper amount to the skin
Apply toner suitable to the skin type after a face wash. Tear the pouch open and appropriately place the sheet mask on the face. Leave the sheet mask for 10 to 20 min so that the nutrition can be absorbed into the skin. When the nutrition of the sheet mask is fully absorbed into the face, remove the mask and dab the remaining ampoule into skin for better absorption. To finish, apply your face cream.
Use after your daily skincare routine Apply starting from larger surface using your fingertip, applying from the center and out, using less around the eyes and ridge of the nose For extra coverage, take a small amount of the product with the tip of your finger and dab over the affected area. *Always close the cover after each use. This prevents nourishing and moisturizing agents from evaporating.
Use after your daily skincare routine Apply starting from larger surface using your fingertip, applying from the center and out, using less around the eyes and ridge of the nose *Always close the cover after each use. This prevents nourishing and moisturizing agents from evaporationg.
Open the lid, press the lid to fill the dropper and apply evenly 3-4 drops to the desired parts, gently tap with the fingers to allow it to absorb
Use as foundation after basic skin care routine or right afternoon when needed (can use before and after makeup) Apply by pressing the puff into the moistened sponge and patting the puff onto the face
Summary not available yet.
Stop use and ask a doctor if rash occurs Skin Cancer/Skin Aging Alert: Spending time in the sun increases your risk of skin cancer and early skin aging. This product has been shown only to prevent sunburn, not skin cancer or early skin aging. For external use only Do not use on damaged or broken skin When using this product keep out of eyes. Rinse with water to remove. Directions apply daily after cleansing and toning smooth over face and throat apply liberally 15 minutes before sun exposure children under 6 months of age: Ask a doctor reapply at least every 2 hours use a water resistant sunscreen if swimming or sweating Inactive Ingredients: Water (Aqua), C12-15 Alkyl Ethylhexanoate, Cetyl Alcohol, Glycerin, Helianthus Annuus (Sunflower) Seed Oil, Sea Water (Maris Aqua), Dimethicone, Behenyl Alcohol, Stearyl Alcohol, Butylene Glycol, Propylene Glycol, Caprylic/Capric Triglyceride, Cyclopentasiloxane, Batyl Alcohol, Glycoproteins, Panax Ginseng Root Extract, Equisetum Arvense (Horsetail) Extract, Phytosterols, Salicornia Herbacea Extract, Niacinamide, Hydrolyzed Oat Protein, Alpinia Galanga Leaf Extract, Quartz, Disodium Adenosine Triphosphate,Tocopherol, Carica Papaya (Papaya) Fruit Extract, Cholesteryl Nonanoate, Cimicifuga Racemosa Root Extract, Zinc Gluconate, Hydrogenated Lecithin, Trifolium Pratense (Clover) Flower Extract, Copper Gluconate, Gold, PEG-20 Phytosterol, Actinidia Polygama Fruit Extract, Acetyl Heptapeptide, Colloidal Gold, Cholesteryl Oleate, Dimethylmethoxy Chromanyl Palmitate, Corallina Officinalis Extract, Carbomer, Cholsteryl Stearate, Acrylates Copolymer, Boswellia Serrata Resin Extract, Ammonium Acryloyldimethltaurate/VP Copolymer, Phormidium Persicinum Extract, Caprylyl Glycol, Dextran, Magnesium Asparate, Glyceryl Stearate, Disodium EDTA, Xanthan Gum, BHT, Fragrance (Parfum), Linalool, Hexyl Cinnamal, Hydroxycitronellal, Alpha-Isomethyl Ionone, Geraniol, Citronellol, Benzyl Benzoate, Butylphenyl Methylpropional, Evernia Furfuracea (Treemoss) Extract, Eugenol, Benzyl Salicylate, Limonene, Phenoxyethanol, Sorbic Acid, Methylparaben, Mica, Titanium Dioxide (CI 77891), Red (CI 14700), Yellow 5 (CI 19140)
After cleansing, apply gently on your face and neck, making sure to softly tap the skin to aid absorption.
Apply to the face and around the neck in the evening
After toning or at ther toner step, drop the appropriate amount of Biotoc Regen Ampoule on your face (apply first on deep lines) and let it absorb by tapping lightly. Using Biotoc line before makeup, you can get smooth and shining look.
Clean and dry the face. Apply the patch on the troubled area and press it gently for 10 seconds. Leave the patch on for 2‒3 hours. * The Essence Chip (micro projections) must be kept dry.
Thoroughly wash and gently wipe out your face with toner. 2. Take out and unfold the mask and apply on your face. 3. Remove the mask after 10~20 minutes and let the skin absorb the remaining essence by gently patting the skin
Apply proper amount to the skin.
Indication & Usage Directions ■ Pour some on the palm of your hand and apply to skin gently. ■ Take appropriate amount according to your skin condition and apply every morning and night. ■ Gently tap the skin with fingers for complete absorption. ■ Clean the skin before use. ■ For the best results, use with Suyan Cheongyu(Emulsion) and Suyan Jeongbaek(Cream). ■ Children under 6 months: ask a doctor.
Summary not available yet.