sodium bicarbonate - Medication Listings
Browse 46 medications by sodium bicarbonate. Open a product record to review strengths, dosage forms, label-backed details, and related navigation.
Uses: relieves • acid indigestion • heartburn • sour stomach • upset stomach associated with these symptoms
Uses relieves: acid indigestion heartburn sour stomach upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 4.2%. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0 – 8.5). It contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-use injection. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 42 mg is equal to 0.5 milliequivalent each of Na+ and HCO3 - . Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 4.2%. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0 – 8.5). It contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-use injection. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 42 mg is equal to 0.5 milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions have an approximate pH of 8.0 (7.0 to 8.5). They contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 ¯. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Indications: Relieves: acid indigestion heartburn sour stomach upset stomach associated with these symptoms
Indications: Relieves: acid indigestion heartburn sour stomach upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in 8.4% concentration. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.5 to 8.5). Carbon dioxide may have been added to adjust the pH of the solution to approximately 8.0. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯ . Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 8.4% with a pH of 7.8 (7.0 to 8.5). Carbon dioxide or nitrogen may be used to adjust pH. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 ¯. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in 8.4% concentration. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.5 to 8.5). Carbon dioxide may have been added to adjust the pH of the solution to approximately 8.0. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO3¯ . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Uses relieves acid indigestion heartburn sour stomach upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in 8.4% concentration. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.5 to 8.5). Carbon dioxide may have been added to adjust the pH of the solution to approximately 8.0. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO3¯ . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 ¯. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentrations of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium bicarbonate injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solution is between 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate USP, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water and insoluble in ethanol. Water for injection, USP is chemically designated H 2 O.
Uses : relieves • acid indigestion • heartburn • sour stomach • upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of Sodium Bicarbonate (NaHCO 3), USP, in Water for Injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. pH of the solution is 7.0 to 8.5. Solutions are offered in concentrations of 4.2% and 8.4%. See table in HOW SUPPLIED/STORAGE AND HANDLING section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium Bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3-. Sodium Bicarbonate, USP is chemically designated NaHCO 3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions have an approximate pH of 8.0 (7.0 to 8.5). They contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 ¯. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
CLINICAL PHARMACOLOGY Intravenous sodium bicarbonate therapy increases plasma bicarbonate, buffers excess hydrogen ion concentration, raises blood pH and reverses the clinical manifestations of acidosis. Sodium bicarbonate in water dissociates to provide sodium (Na + ) and bicarbonate (HCO 3 - ) ions. Sodium (Na + ) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. Bicarbonate (HCO 3 - ) is a normal constituent of body fluids and the normal plasma level ranges from 24 to 31 mEq/liter. Plasma concentration is regulated by the kidney through acidification of the urine when there is a deficit or by alkalinization of the urine when there is an excess. Bicarbonate anion is considered "labile" since at a proper concentration of hydrogen ion (H+) it may be converted to carbonic acid (H 2 CO 3 ) and thence to its volatile form, carbon dioxide (CO 2 ) excreted by the lung. Normally a ratio of 1:20 (carbonic acid: bicarbonate) is present in the extracellular fluid. In a healthy adult with normal kidney function, practically all the glomerular filtered bicarbonate ion is reabsorbed; less than 1% is excreted in the urine.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in 8.4% concentration. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.5 to 8.5). Carbon dioxide may have been added to adjust the pH of the solution to approximately 8.0. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO3¯ . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 8.4% with a pH of 7.8 (7.0 to 8.5). Carbon dioxide or nitrogen may be used to adjust pH. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 ¯. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Indications and Usage Relieves - • acid indigestion • heartburn • sour stomach • upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of Sodium Bicarbonate (NaHCO3), USP, in Water for Injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. pH of the solution is 7.0 to 8.5. Solutions are offered in concentrations of 4.2% and 8.4%. See table in HOW SUPPLIED/STORAGE AND HANDLING section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium Bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 4.2%. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0 – 8.5). It contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-use injection. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 42 mg is equal to 0.5 milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHC03) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 -. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Use For the relief of heartburn, sour stomach, acid ingestion and upset stomach associated with these symptoms.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCOꝫ) in water for injection for administration by the intravenous route as and electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2% and 8.4%. See table in HOW SUPPLIED/STORAGE AND HANDLING section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0-8.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium Bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 -, 42mg is equal to 0.5 milliequivalent each of Na + and HCO 3 -. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 – . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 5.0%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. Solution in LVP container has 0.9 mg/mL of edetate disodium, anhydrous added as a stabilizer. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3¯. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection is chemically designated H2O.
Use For relief of heartburn, acid indigestion, and upset stomach associated with these symptoms.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection is chemically designated H 2 O.
Uses: relieves • acid indigestion • heartburn • sour stomach • upset stomach associated with these symptoms
CLINICAL PHARMACOLOGY Intravenous sodium bicarbonate therapy increases plasma bicarbonate, buffers excess hydrogen ion concentration, raises blood pH and reverses the clinical manifestations of acidosis. Sodium bicarbonate in water dissociates to provide sodium (Na + ) and bicarbonate (HCO 3 - ) ions. Sodium (Na + ) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. Bicarbonate (HCO 3 - ) is a normal constituent of bodyfluids and the normal plasma level ranges from 24 to 31 mEq/liter. Plasma concentration is regulated by the kidney through acidification of the urine when there is a deficit or by alkalinization of the urine when there is an excess. Bicarbonate anion is considered "labile" since at a proper concentration of hydrogen ion (H+) it may be converted to carbonic acid (H 2 CO 3 ) and thence to its volatile form, carbon dioxide (CO 2 ) excreted by the lung. Normally a ratio of 1:20 (carbonic acid: bicarbonate) is present in the extracellular fluid. In a healthy adult with normal kidney function, practically all the glomerular filtered bicarbonate ion is reabsorbed; less than 1% is excreted in the urine.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in 8.4% concentration. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.5 to 8.5). Carbon dioxide may have been added to adjust the pH of the solution to approximately 8.0. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO3¯ . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2% and 8.4%. See table in HOW SUPPLIED/STORAGE AND HANDLING section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0 – 8.5). The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Sodium Bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, 42 mg is equal to 0.5 milliequivalents each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Uses relieves: acid indigestion heartburn sour stomach upset stomach associated with these symptoms
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection is chemically designated H2O.
Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO 3 ) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. The solution is offered in a concentration of 4.2%. See table in HOW SUPPLIED section for contents and characteristics. The solution has an approximate pH of 8.0 (7.0 – 8.5). It contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-use injection. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 42 mg is equal to 0.5 milliequivalent each of Na + and HCO 3 - . Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.
Uses relieves acid indigestion heartburn sour stomach upset stomach associated with these symptoms
About sodium bicarbonate Medications
This collection groups medications in our database that are associated with sodium bicarbonate. It currently includes 46 matching listings. Open a drug detail page to review dosage forms, strengths, ingredients, labeling, and related brand or generic context.
How to Use This Page
Use these results to move into a specific drug detail page, then follow related brand, generic, manufacturer, or substance links for broader exploration.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.