sensorcaine - Medication Listings

SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C 18 H 28 N 2 O·HCl·H 2 O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure: The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C 9 H 13 NO 3 ·C 4 H 6 O 6 , with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure: Bupivacaine Hydrochloride Monohydrate Chemical Structure Epinephrine Bitartrate Chemical Structure SENSORCAINE-MPF in single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000 (as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINE in multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000 (as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5.

Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure: Epinephrine is (-)-3, 4-Dihydroxy-a [(methylamino)methyl] benzyl alcohol. It has the following structural formula: The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Dosage forms listed as Sensorcaine-MPF indicates single dose solutions that are Methyl Paraben Free (MPF). Sensorcaine-MPF is a sterile isotonic solution containing sodium chloride. Sensorcaine in multiple dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 4.0 and 6.5 with sodium hydroxide and/or hydrochloric acid. Sensorcaine-MPF with Epinephrine 1:200,000 (as bitartrate) is a sterile isotonic solution containing sodium chloride. Each mL contains bupivacaine hydrochloride and 0.005 mg epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid (anhydrous) as stabilizer. Sensorcaine with Epinephrine 1:200,000 (as bitartrate) in multiple dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 3.3 to 5.5 with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. Note: The user should have an appreciation and awareness of the formulations and their intended uses (see DOSAGE AND ADMINISTRATION). Formula1 Formula2

SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C 18 H 28 N 2O ·HCl·H 2 O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure: The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C 9 H 13 NO 3 ·C 4 H 6 O 6 , with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure: SENSORCAINE-MPF in single dose vials is a sterile, isotonic, clear, colorless, and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg, or 7.5 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE-MPF WITH EPINEPHRINE 1:200,000 (as bitartrate) in single dose vials is a sterile, isotonic, clear, colorless to slightly yellow and preservative-free solution. Each mL contains 2.64 mg, 5.27 mg, or 7.92 mg of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, and also equivalent to 2.5 mg, 5.0 mg or 7.5 mg bupivacaine hydrochloride anhydrous; respectively), 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, 8.0 mg sodium chloride for isotonicity, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. SENSORCAINE in multiple dose vials is a sterile, isotonic, clear, colorless solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 g sodium chloride for isotonicity, 1 mg of methyl paraben as an antiseptic preservative and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 4.0 and 6.5. SENSORCAINE WITH EPINEPHRINE 1:200,000 (as bitartrate) in multiple dose vials is a sterile, isotonic, clear, colorless to slightly yellow solution. Each mL contains 2.64 mg, or 5.27 mg, of bupivacaine hydrochloride monohydrate (equivalent to 2.22 mg, or 4.44 mg of bupivacaine, and also equivalent to 2.5 mg and 5.0 mg of bupivacaine hydrochloride anhydrous; respectively), 8.0 mg sodium chloride for isotonicity, 0.0091 mg or 9.09 mcg of epinephrine bitartrate (equivalent to 0.005 mg of epinephrine base), 1 mg methylparaben as an antiseptic preservative, 0.5 mg sodium metabisulfite as an antioxidant, 0.2 mg citric acid (anhydrous) as a stabilizer, and sodium hydroxide and/or hydrochloric acid as pH adjusters. The pH of these solutions is adjusted to between 3.3 to 5.5. Formula1.jpg Formula2.jpg

Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure: Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula: The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Figure Figure Dosage forms listed as Sensorcaine-MPF indicates s ingle dose solutions that are M ethyl P araben F ree (MPF). Sensorcaine-MPF is a sterile isotonic solution containing sodium chloride. Sensorcaine in multiple dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 4.0 and 6.5 with sodium hydroxide and/or hydrochloric acid. Sensorcaine-MPF with Epinephrine 1:200,000 (as bitartrate) is a sterile isotonic solution containing sodium chloride. Each mL contains bupivacaine hydrochloride and 0.005 mg epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid (anhydrous) as stabilizer. Sensorcaine with Epinephrine 1:200,000 (as bitartrate) in multiple dose vials, each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to between 3.3 to 5.5 with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen. Note: The user should have an appreciation and awareness of the formulations and their intended uses (see DOSAGE AND ADMINISTRATION ).