potassium phosphates - Medication Listings

Potassium Phosphates in Sodium Chloride Injection is a phosphorus replacement product. It is a sterile, non-pyrogenic, solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in sodium chloride. It is supplied as a 100 mL and 250 mL ready-to-use single dose container for intravenous use and does not require further dilution. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4, molecular weight 174.18, colorless or white granular salt freely soluble in water. For 100 mL single-dose container: Each mL contains 11.2 mg of monobasic potassium phosphate and 11.8 mg of dibasic potassium phosphate. Each mL contains 0.15 mmol phosphorus (equivalent to 4.65 mg phosphorus), and 0.22 mEq potassium (equivalent to 8.50 mg of potassium). For 250 mL single-dose container: Each mL contains 4.48 mg of monobasic potassium phosphate and 4.72 mg of dibasic potassium phosphate. Each mL contains 0.06 mmol phosphorus (equivalent to 1.86 mg phosphorus), and 0.088 mEq potassium (equivalent to 3.40 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. In addition, each mL of solution contains 9 mg sodium chloride for isotonicity. The pH is 6.0 to 7.0. This product contains no more than 100 mcg/L of aluminum. The osmolality is 500-700 mOsmol/kg for the 100 mL single-dose container and 300-500 mOsmol/kg for the 250 mL single-dose container.

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH 2 PO 4 , molecular weight is 136.084 g/mol and the structural formula is as below: It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K 2 HPO 4 , molecular weight is 174.18 g/mol and the structural formula is as below: It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions (5.5) ] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route. 1 1

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions (5.5) ] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH 2 PO 4 , molecular weight is 136.084 g/mol and the structural formula is as below: It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K 2 HPO 4 , molecular weight is 174.18 g/mol and the structural formula is as below: It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions (5.5) ] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route. 1 2

Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions (5.5)] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.

Potassium Phosphates in 0.9% Sodium Chloride Injection, for intravenous use, is a phosphorus replacement product containing phosphorus 0.06 mmol/mL and potassium 0.088 mEq/mL. It is a sterile, non-pyrogenic, ready-to-use diluted solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in 0.9% sodium chloride. No dilution is required before administration. It is supplied in 250 mL single-dose intravenous infusion bag. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 4.48 mg of monobasic potassium phosphate, USP and 4.72 mg of dibasic potassium phosphate, USP. Each mL contains phosphorus, 0.06 mmol (equivalent to 1.86 mg phosphorus); potassium, 0.088 mEq (equivalent to 3.40 mg of potassium); sodium chloride, USP, 9 mg and water for injection, USP (q.s.). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. This product contains no more than 25 mcg/L of aluminum. The pH is 5.8 to 7.2 and the osmolarity is 0.455 mOsmol/mL (calc).

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions ( 5.5 )] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL, and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions ( 5.5 )] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.