potassium chloride - Medication Listings

Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.

The potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 10 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, crystalline powder. It is odorless and has a saline taste. It is freely soluble in water and practically insoluble in ethanol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrate within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. This product complies with USP assay preparation 2. Inactive Ingredients: crospovidone, ethylcellulose, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and talc.

Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.

Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.

Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride is K-Cl with a molecular mass of 74.55 g/mol. Each pouch of light pink to orange powder with an orange odor contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: citric acid anhydrous, colloidal silicon dioxide, FD&C Yellow #6, natural and artificial orange flavor (acacia, alpha-tocopherol), and sucralose.

The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

Potassium chloride extended-release capsules USP, 8 mEq and 10 mEq are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The inactive ingredients are, ethylcellulose, FD&C Blue #1, FD&C Red # 40, gelatin, sodium lauryl sulfate, titanium oxide and triacetin.

Potassium chloride extended-release capsules USP, 8 mEq and 10 mEq are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The inactive ingredients are, ethylcellulose, FD&C Blue #1, FD&C Red # 40, gelatin, sodium lauryl sulfate, titanium oxide and triacetin.

Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose.

Potassium chloride extended-release capsules are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients of pellets in potassium chloride extended-release capsules include ethylcellulose and talc. The 8 mEq strength capsules contain gelatin and titanium dioxide. The 10 mEq strength capsules contain Brilliant Blue FCF-FD&C Blue 1, FD&C Red 3, gelatin and titanium dioxide. The capsules in both strengths are printed with edible ink of black oil Black SW9008, containing black iron oxide, potassium hydroxide, propylene glycol and shellac. USP dissolution method is pending.

Potassium Chloride is a white crystalline powder or colorless crystals. It is freely soluble in water and practically insoluble in alcohol. Chemically, potassium chloride is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.