estradiol - Medication Listings
Browse 90 medications by estradiol. Open a product record to review strengths, dosage forms, label-backed details, and related navigation.
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake.
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol (62.03% v/v), propylene glycol, purified water, and triethanolamine) are pharmacologically inactive.
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP.
Estradiol vaginal inserts USP, 10 mcg are white to off-white, round, film-coated, unscored, biconvex inserts containing 10.3 mcg of estradiol hemihydrate, USP equivalent to 10 mcg of estradiol. Each 10 mcg estradiol vaginal insert contains the following excipients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, and polyethylene glycol. Each estradiol vaginal insert is 6 mm in diameter and is placed in a disposable applicator. Each insert-filled applicator is packaged separately in a blister pack. Estradiol vaginal inserts are used intravaginally. When the insert comes in contact with the vaginal mucosa, estradiol is released into the vagina. Estradiol hemihydrate, USP is white to practically white crystals or powder and chemically described as estra1,3,5 (10)-triene-3,17β-diol, hydrate (2:1). The structural formula is: C 18 H 24 O 2 . 1/2 H 2 O M.W. 281.4 (Estradiol hemihydrate, USP) FDA approved dissolution test specifications differ from USP.
Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm 2 , and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C 18 H 24 O 2 • ½ H 2 O and molecular weight of 281.39. The structural formula is: Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: (1) A foam backing with adhesive layer (2) A polyester film (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive. Estradiol Structural Formula Transdermal Parts
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structure formula.jpg
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structure formula.jpg
Summary not available yet.
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.
ESTRADIOL TRANSDERMAL SYSTEM contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of ESTRADIOL TRANSDERMAL SYSTEM are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 1.65, 2.48, 3.30, 4.95, or 6.6 cm 2 and contains 0.41, 0.62, 0.83, 1.24, or 1.65 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. The structural formula is The molecular formula of estradiol is C 18 H 24 O 2 . The molecular weight is 272.39 ESTRADIOL TRANSDERMAL SYSTEM is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a polyolefin laminate backing (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive. chemical structure layers
Estradiol transdermal system, USP (twice-weekly) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.7, 4.05, 5.40, 8.1, or 10.8 cm 2 and contains 0.405, 0.608, 0.810, 1.215, or 1.620 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol is C 18 H 24 O 2 . The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyethylene film (2) an adhesive formulation containing estradiol, acrylic adhesive, colloidal silicon dioxide, oleic acid, povidone, propylene glycol, and silicone adhesive and (3) a fluoropolymer coated polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. Estradiol transdermal systems, USP (twice-weekly) are packaged with additional piece of protective film above the system within each pouch. This piece of protective film is removed and discarded at the time of use. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive. FDA approved drug release test specifications differ from USP. structure tds-layers
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP.
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.
Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is: The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP. Structural Formula Active Component System
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol (62.03% v/v), propylene glycol, purified water, and triethanolamine) are pharmacologically inactive.
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm 2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is: The molecular formula of estradiol hemihydrate is C 18 H 24 O 2 • ½ H 2 O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive. Estradiol Structrual Formula Transdermal Patch Cross Section
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol, an estrogen. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol, propylene glycol, purified water, and triethanolamine) are pharmacologically inactive. Estradiol gel contains 56% alcohol. estradiol chemical structure
Estradiol gel contains 0.06 percent estradiol in an absorptive hydroalcoholic gel base for topical application. It is a clear, colorless gel, which is odorless when dry. One pump depression of estradiol gel, 0.06% delivers 1.25 g of gel containing 0.75 mg estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The active component of the gel is estradiol. The remaining components of the gel (purified water, alcohol (44.89% v/v), triethanolamine and carbomer 974P) are pharmacologically inactive. structure
Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm 2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is The molecular formula of estradiol, USP is C 18 H 24 0 2 . The molecular weight is 272.39 Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6. formula 3 layers
Estradiol vaginal inserts USP, 10 mcg are white to off-white, round, film-coated, unscored, biconvex inserts containing 10.3 mcg of estradiol hemihydrate, USP equivalent to 10 mcg of estradiol. Each 10 mcg estradiol vaginal insert contains the following excipients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, and polyethylene glycol. Each estradiol vaginal insert is 6 mm in diameter and is placed in a disposable applicator. Each insert-filled applicator is packaged separately in a blister pack. Estradiol vaginal inserts are used intravaginally. When the insert comes in contact with the vaginal mucosa, estradiol is released into the vagina. Estradiol hemihydrate, USP is white to practically white crystals or powder and chemically described as estra1,3,5 (10)-triene-3,17β-diol, hydrate (2:1). The structural formula is: C 18 H 24 O 2 . 1/2 H 2 O M.W. 281.4 (Estradiol hemihydrate, USP) FDA approved dissolution test specifications differ from USP.
Each gram of estradiol vaginal cream USP 0.01% contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and t e rtiar y -butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.37. The structural formula is: The structural formula is: Each gram of estradiol vaginal cream USP 0.01% contains 0.1 mg estradiol in a nonliquefying base containing purified water, propylene glycol, stearyl alcohol, white ceresin wax, mono- and di-glycerides, hypromellose 2208 (4000 cps), sodium lauryl sulfate, methylparaben, edetate di-sodium and tertiary-butylhydroquinone. Estradiol is chemically described as estra-1,3,5(10)-triene-3, 17(beta)-diol. It has an empirical formula of C18H24O2 and molecular weight of 272.37.
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol gel 0.1%, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel 0.1% is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol, an estrogen. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol, propylene glycol, purified water, and triethanolamine) are pharmacologically inactive. Estradiol gel 0.1% contains: 58.6% alcohol. Divigel Chemical Structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: [structure] C18H24O2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP.
Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm 2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is: The molecular formula of estradiol is C 18 H 24 0 2. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. ----- (1) Backing ----- (2) Adhesive Containing Estradiol ----- (3) Protective Liner The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive. Estradiol structural formula Estradiol Transdermal System - Layers
Estradiol Transdermal System, USP is designed to release estradiol continuously upon application to intact skin. Six (7.5, 11.25, 15, 18, 22.5 and 30 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.5, 11.25, 15, 18, 22.5 or 30 cm 2 , and contains 1.888, 2.832, 3.777, 4.532, 5.665 or 7.553 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white or creamy white, small crystals or crystalline powder, odorless, stable in air and hygroscopic. Estradiol USP is chemically described as estra-1,3,5(10)-triene-3, 17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The Estradiol Transdermal System, USP comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: A translucent polyethylene film. An acrylate adhesive matrix containing estradiol USP. A protective liner of silicone coated polyester film is attached to the adhesive surface and must be removed before the system can be used. Cross Section of the System Estradiol Transdermal System, USP is packaged with additional pieces of protective film above and below the system within each pouch. These are discarded at the time of use. The active component of the system is estradiol USP. The remaining components of the system (acrylic adhesive, colloidal silicon dioxide, ethyl oleate, glyceryl monolaurate, isopropyl myristate, povidone and polyethylene backing) are pharmacologically inactive. FDA approved drug release test specifications differ from USP. Estradiol Transdermal System Estradiol Transdermal System
Estradiol transdermal system, USP is designed to provide nominal in vivo delivery of 0.014 mg of estradiol per day continuously upon application to intact skin. The period of use is 7 days. The transdermal system has a contact surface area of 3.9 cm 2 , and contains 0.982 mg of estradiol USP. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3, 17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The estradiol transdermal system, USP comprises three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: 1. a translucent polyethylene film. 2. an acrylate adhesive matrix containing estradiol USP. 3. A protective liner of silicon coated polyester film is attached to the adhesive surface and must be removed before the transdermal system can be used. Cross Section of the System: Estradiol transdermal system, USP is packaged with additional pieces of protective film above and below the system within each pouch. These are discarded at the time of use. The active component of the transdermal system is estradiol USP. The remaining components of the transdermal system (acrylic adhesive, colloidal silicon dioxide, ethyl oleate, glyceryl monolaurate, isopropyl myristate, povidone, and polyethylene backing) are pharmacologically inactive. FDA approved drug release test specifications differ from USP. Estradiol Transdermal System, 14 mcg/day Estradiol Transdermal System, 14 mcg/ day
Summary not available yet.
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17β-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol (62.03% v/v), propylene glycol, purified water, and triethanolamine) are pharmacologically inactive.
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol gel 0.1 percent, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1.0, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1.0, and 1.25 mg estradiol, respectively). The active component of the topical gel is estradiol. Estradiol is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.39. The structural formula is: The remaining components of the gel (carbomer, ethanol, propylene glycol, purified water, and triethanolamine) are pharmacologically inactive. Estradiol Gel Structural Formula
Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structure formula.jpg
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake. structual formula
Estradiol gel 0.1%, is a clear, colorless gel, which is odorless when dry. It is designed to deliver sustained circulating concentrations of estradiol, USP when applied once daily to the skin. The gel is applied to a small area (200 cm 2 ) of the thigh in a thin layer. Estradiol gel is available in five doses of 0.25, 0.5, 0.75, 1, and 1.25 grams for topical application (corresponding to 0.25, 0.5, 0.75, 1, and 1.25 mg estradiol USP, respectively). The active component of the topical gel is estradiol USP, an estrogen. Estradiol, USP is a white crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has an empirical formula of C 18 H 24 O 2 and molecular weight of 272.38. The structural formula is: The remaining components of the gel (carbomer homopolymer type B, ethyl alcohol 95%, propylene glycol, purified water, and trolamine) are pharmacologically inactive. Estradiol gel, 0.1% contains 55% w/w alcohol. Structural Formula
Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm 2 ) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm 2 , and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C 18 H 24 O 2 • ½ H 2 O and molecular weight of 281.39. The structural formula is: Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are: (1) A foam backing with adhesive layer (2) A polyester film (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive. Estradiol Structural Formula Transdermal Parts
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP.
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP.
Estradiol Tablets USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white to practically white powder, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is: C 18 H 24 O 2 M.W. 272.38 Inactive Ingredients: Colloidal silicon dioxide, corn starch, microcrystalline cellulose, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and D&C yellow no. 10 aluminum lake. FDA approved dissolution test specifications differ from USP. structure
Summary not available yet.
Each gram of estradiol vaginal cream, USP, 0.01% contains 0.1 mg estradiol (as estradiol hemihydrate) in a nonliquefying base containing propylene glycol, methylparaben, sodium lauryl sulfate, mono- and di-glycerides, stearyl alcohol, ceresin wax, tert-butylhydroquinone, disodium EDTA, hypromellose, and purified water. Estradiol hemihydrate is chemically described as estra-1,3,5(10)-triene-3,17β-diol hemihydrate. It has an empirical formula of C 18 H 24 O 2 . ½H 2 O and molecular weight of 272.37. The structural formula is: structure
About estradiol Medications
This collection groups medications in our database that are associated with estradiol. It currently includes 90 matching listings. Open a drug detail page to review dosage forms, strengths, ingredients, labeling, and related brand or generic context.
How to Use This Page
Use these results to move into a specific drug detail page, then follow related brand, generic, manufacturer, or substance links for broader exploration.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.